Lihui Yuwen

Reduced graphene oxide/PAMAM–silver nanoparticles nanocomposite modified electrode for direct electrochemistry of glucose oxidase and glucose sensing

Reduced graphene oxide/PAMAM-silver nanoparticles nanocomposite (RGO-PAMAM-Ag) was synthesized by self-assembly of carboxyl-terminated PAMAM dendrimer (PAMAM-G3.5) on graphene oxide (GO) as growing template, and in-situ reduction of both AgNO(3) and GO under microwave irradiation. The RGO-PAMAM-Ag nanocomposite was used as a novel immobilization matrix for glucose oxidase (GOD) and exhibited excellent direct electron transfer properties for GOD with the rate constant (K(s)) of 8.59 s(-1). The fabricated glucose biosensor based on GOD electrode modified with RGO-PAMAM-Ag nanocomposite displayed satisfactory analytical performance including high sensitivity (75.72 μA mM(-1) cm(-2)), low detection limit (4.5 μM), an acceptable linear range from 0.032 mM to 1.89 mM, and also preventing the interference of some interfering species usually coexisting with glucose in human blood at the work potential of -0.25 V. These results indicated that RGO-PAMAM-Ag nanocomposite is a promising candidate material for high-performance glucose biosensors.

Gold nanoparticle-decorated MoS2 nanosheets for simultaneous detection of ascorbic acid, dopamine and uric acid

An electrochemical sensor has been developed for simultaneous detection of dopamine (DA), uric acid (UA) and ascorbic acid (AA) based on a gold nanoparticle-decorated MoS2 nanocomposite (AuNPs@MoS2) modified electrode. The AuNPs@MoS2 nanocomposite has been synthesized by electrodeposition of AuNPs on the MoS2 nanosheets, which possesses better properties than pure AuNPs and MoS2. The AuNPs@MoS2 film modified electrode showed excellent electrocatalytic activity toward the oxidation of AA, DA and UA with three well-resolved oxidation peaks. The peak separation of AA–DA, DA–UA and AA–UA is 151 mV, 137 mV and 288 mV, respectively, which permits the modified electrode to individually or simultaneously analyze AA, DA and UA by differential pulse voltammetry (DPV). Under optimum conditions, the AuNPs@MoS2 modified electrode exhibits linear response toward AA, DA and UA in the range of 50–100 000 μM, 0.05–30 μM and 50–40 000 μM, respectively. Moreover, the MoS2-based modified electrode was successfully employed to determine DA in human serum samples with satisfactory results.

Creating SERS Hot Spots on MoS2 Nanosheets with in Situ Grown Gold Nanoparticles

Herein, a reliable surface-enhanced Raman scattering (SERS)-active substrate has been prepared by synthesizing gold nanoparticles (AuNPs)-decorated MoS2 nanocomposite. The AuNPs grew in situ on the surface of MoS2 nanosheet to form efficient SERS hot spots by a spontaneous redox reaction with tetrachloroauric acid (HAuCl4) without any reducing agent. The morphologies of MoS2 and AuNPs-decorated MoS2 nanosheet were characterized by TEM, HRTEM, and AFM. The formation of hot spots greatly depended on the ratio of MoS2 and HAuCl4. When the concentration of HAuCl4 was 2.4 mM, the as-prepared AuNPs@MoS2-3 nanocomposite exhibited a high-quality SERS activity toward probe molecule due to the generated hot spots. The spot-to-spot SERS signals showed that the relative standard deviation (RSD) in the intensity of the main Raman vibration modes (1362, 1511, and 1652 cm(-1)) of Rhodamine 6G were about 20%, which displayed good uniformity and reproducibility. The AuNPs@MoS2-based substrate was reliable, sensitive, and reproducible, which showed great potential to be an excellent SERS substrate for biological and chemical detection.

One-pot, low-temperature synthesis of branched platinum nanowires/reduced graphene oxide (BPtNW/RGO) hybrids for fuel cells

A facile wet-chemical approach for the synthesis of branched platinum nanowires (BPtNW) on reduced graphene oxide (RGO) was demonstrated. Formic acid (HCOOH) was used as the reductant for preparing BPtNW and synchronously reducing graphene oxide (GO) under the catalysis of the as-prepared BPtNW. The whole synthetic procedure was carried out easily in one pot under room temperature. The length and diameter of the Pt nanowires anchored on the RGO sheets are about 5–20 nm and 3–4 nm, respectively. GO is deoxygenated and restored to the structure of graphene successfully by the reduction of HCOOH with BPtNW as the catalyst. The BPtNW/RGO hybrids exhibit higher electrocatalytic activity and stability towards the methanol oxidation reaction than commercial Pt/C catalysts (Hispec4000). The specific methanol oxidation reaction (MOR) activity of the BPtNW/RGO hybrids was 1.154 mA cm−2 at 0.700 V, which was a nearly 3.94 times higher specific activity than that of Pt/C (Hispec4000), showing their great potential applications in fuel cells.

DNA-conjugated quantum dot nanoprobe for high-sensitivity fluorescent detection of DNA and micro-RNA.

Herein, we report a convenient approach to developing quantum dots (QDs)-based nanosensors for DNA and micro-RNA (miRNA) detection. The DNA-QDs conjugate was prepared by a ligand-exchange method. Thiol-labeled ssDNA is directly attached to the QD surface, leading to highly water-dispersible nanoconjugates. The DNA-QDs conjugate has the advantages of the excellent optical properties of QDs and well-controlled recognition properties of DNA and can be used as a nanoprobe to construct a nanosensor for nucleic acid detection. With the addition of a target nucleic acid sequence, the fluorescence intensity of QDs was quenched by an organic quencher (BHQ2) via Förster resonance energy transfer. This nanosensor can detect as low as 1 fM DNA and 10 fM miRNA. Moreover, the QDs-based nanosensor exhibited excellent selectivity. It not only can effectively distinguish single-base-mismatched and random nucleic sequences but also can recognize pre-miRNA and mature miRNA. Therefore, the nanosensor has high application potential for disease diagnosis and biological analysis.

Recent Advances in Synthesis and Biomedical Applications of Two-Dimensional Transition Metal Dichalcogenide Nanosheets

During recent decades, a giant leap in the development of nanotechnology has been witnessed. Numerous nanomaterials with different dimensions and unprecedented features have been developed and provided unimaginably wide scope to solve the challenging problems in biomedicine, such as cancer diagnosis and therapy. Recently, two-dimensional (2D) transition metal dichalcogenide (TMDC) nanosheets (NSs), including MoS2 , WS2 , and etc., have emerged as novel inorganic graphene analogues and attracted tremendous attention due to their unique structures and distinctive properties, and opened up great opportunities for biomedical applications, including ultrasensitive biosensing, biological imaging, drug delivery, cancer therapy, and antibacterial treatment. A comprehensive overview of different synthetic methods of ultrathin 2D TMDC NSs and their state-of-the-art biomedical applications, especially those that have appeared in the past few years, is presented. At the end of this review, the future opportunities and challenges for 2D TMDC NSs in biomedicine are also discussed.

A MoS2?based system for efficient immobilization of hemoglobin and biosensing applications

A novel hydrogen peroxide (H2O2) and nitric oxide (NO) biosensor was fabricated by immobilizing hemoglobin (Hb) on a gold nanoparticle-decorated MoS2 nanosheet (AuNPs@MoS2) nanocomposite film modified glass carbon electrode. The AuNPs@MoS2 nanocomposite not only made the immobilized Hb keep its native biological activity but also facilitated the electron transfer between electrode and the electroactive center of Hb due to its excellent conductivity and biocompatibility. The direct electrochemistry and bioelectrocatalytic activity of Hb were investigated by cyclic voltammetry (CV). The modified electrode showed good electrocatalytic ability toward the reduction of H2O2 and NO. Under optimal conditions, the current response was linear with the concentration of H2O2 and NO in the range from 10 to 300 μM and 10 to 1100 μM with a detection limit of 4 and 5 μM, respectively. This MoS2-based biosensor was sensitive, reproducible and stable, indicating that AuNPs@MoS2 nanocomposite maybe a promising platform to construct electrochemical sensors for chemical and biological molecules detection.

Facile Synthesis of Yolk–Shell-Structured Triple-Hybridized Periodic Mesoporous Organosilica Nanoparticles for Biomedicine

The synthesis of mesoporous nanoparticles with controllable structure and organic groups is important for their applications. In this work, yolk-shell-structured periodic mesoporous organosilica (PMO) nanoparticles simultaneously incorporated with ethane-, thioether-, and benzene-bridged moieties are successfully synthesized. The preparation of the triple-hybridized PMOs is via a cetyltrimethylammonium bromide-directed sol-gel process using mixed bridged silsesquioxanes as precursors and a following hydrothermal treatment. The yolk-shell-structured triple-hybridized PMO nanoparticles have large surface area (320 m(2) g(-1) ), ordered mesochannels (2.5 nm), large pore volume (0.59 cm(3) g(-1) ), uniform and controllable diameter (88-380 nm), core size (22-110 nm), and shell thickness (13-45 nm). In vitro cytotoxicity, hemolysis assay, and histological studies demonstrate that the yolk-shell-structured triple-hybridized PMO nanoparticles have excellent biocompatibility. Moreover, the organic groups in the triple-hybridized PMOs endow them with an ability for covalent connection of near-infrared fluorescence dyes, a high hydrophobic drug loading capacity, and a glutathione-responsive drug release property, which make them promising candidates for applications in bioimaging and drug delivery.

Hollow periodic mesoporous organosilica nanospheres by a facile emulsion approach.

Periodic mesoporous organosilicas (PMOs) with homogeneously incorporated organic groups, highly ordered mesopores, and controllable morphology have attracted increasing attention. In this work, one-step emulsion approach for preparation of hollow periodic mesoporous organosilica (HPMO) nanospheres has been established. The method is intrinsically simple and does not require any sacrificial templates, corrosive and toxic etching agents. The obtained HPMO nanospheres have high surface area (∼950m(2)g(-1)), accessible ordered mesochannels (∼3.4nm), large pore volume (∼3.96cm(3)g(-1)), high condensation degree (77%), and diameter (∼560nm), hollow chamber size (∼400nm), and shell thickness (∼80nm). Furthermore, cytotoxicity show the cell viability is higher than 86% after incubating with the HPMO nanospheres at a concentration of up to 1200μgmL(-1) for 24h. The hemolysis of HPMO nanospheres is lower than 1.1% at concentrations ranging from 10 to 2000μgmL(-1). The lower hemolysis and cytotoxicity make the HPMO nanospheres great promise for future biomedical applications.

Facile preparation of multicolor polymer nanoparticle bioconjugates with specific biorecognition.

A facile and efficient strategy to prepare multicolor and surface-functionalizable conjugated polymer nanoparticles (PPVseg-COOH CPNs) was demonstrated. The CPNs with tunable photoluminescence colors and carboxylate groups were further covalently modified with a series of specific molecules such as streptavidin, IgG and poly(ethylene glycol) to show their generality for subsequent bioconjugation and biological applications. The streptavidin coating can significantly improve the photostability of the PPVseg-SA CPNs, which indicates that specific biomolecules such as streptavidin functionalization of multicolor PPVseg-COOH CPNs can be applied to achieve high optical stability of CPNs in various buffer solutions, metal ions for many biological applications. Furthermore, the resulted PPVseg-SA CPNs also show efficient labeling ability in specific cellular imaging. The synthetic methods present the feasibility and versatility for further developing surface-functionalizable CPNs probes with full-color tunability for biological imaging and bioanalytical applications.