Lina Niu

Bonding of universal adhesives to dentine--Old wine in new bottles?

OBJECTIVEnMulti-mode universal adhesives offer clinicians the choice of using the etch-and-rinse technique, selective enamel etch technique or self-etch technique to bond to tooth substrates. The present study examined the short-term in vitro performance of five universal adhesives bonded to human coronal dentine.nnnMETHODSnTwo hundred non-carious human third molars were assigned to five groups based on the type of the universal adhesives (Prime&Bond Elect, Scotchbond Universal, All-Bond Universal, Clearfil Universal Bond and Futurabond U). Two bonding modes (etch-and-rinse and self-etch) were employed for each adhesive group. Bonded specimens were stored in deionized water for 24h or underwent a 10,000-cycle thermocycling ageing process prior to testing (N=10). Microtensile bond testing (μTBS), transmission electron microscopy (TEM) of resin-dentine interfaces in non-thermocycled specimens and scanning electron microscopy (SEM) of tracer-infused water-rich zones within hybrid layers of thermocycled specimens were performed.nnnRESULTSnBoth adhesive type and testing condition (with/without thermocycling) have significant influences on μTBS. The use of each adhesive in either the etch-and-rinse or self-etch application mode did not result in significantly different μTBS to dentine. Hybrid layers created by these adhesives in the etch-and-rinse bonding mode and self-etch bonding mode were ∼5μm and ≤0.5μm thick respectively. Tracer-infused regions could be identified within the resin-dentine interface from all the specimens prepared.nnnCONCLUSIONnThe increase in versatility of universal adhesives is not accompanied by technological advances for overcoming the challenges associated with previous generations of adhesives. Therapeutic adhesives with bio-protective and bio-promoting effects are still lacking in commercialized adhesives.nnnCLINICAL SIGNIFICANCEnUniversal adhesives represent manufacturers attempt to introduce versatility in product design via adaptation of a single-bottle self-etch adhesive for other application modes without compromising its bonding effectiveness.

The critical barrier to progress in dentine bonding with the etch-and-rinse technique

OBJECTIVESnThe lack of durability in resin-dentine bonds led to the use of chlorhexidine as MMP-inhibitor to prevent the degradation of hybrid layers. Biomimetic remineralisation is a concept-proven approach in preventing the degradation of resin-dentine bonds. The purpose of this study is to examine the integrity of aged resin-dentine interfaces created with a nanofiller-containing etch-and-rinse adhesive after the application of these two approaches.nnnMETHODSnThe more established MMP-inhibition approach was examined using a parallel in vivo and in vitro ageing design to facilitate comparison with the biomimetic remineralisation approach using an in vitro ageing design. Specimens bonded without chlorhexidine exhibited extensive degradation of the hybrid layer after 12 months of in vivo ageing.nnnRESULTSnDissolution of nanofillers could be seen within a water-rich zone within the adhesive layer. Although specimens bonded with chlorhexidine exhibited intact hybrid layers, water-rich regions remained in those hybrid layers and degradation of nanofillers occurred within the adhesive layer. Specimens subjected to in vitro biomimetic remineralisation followed by in vitro ageing demonstrated intrafibrillar collagen remineralisation within hybrid layers and deposition of mineral nanocrystals in nanovoids within the adhesive.nnnCONCLUSIONSnThe impact was realized by understanding the lack of an inherent mechanism to remove water from resin-dentine interfaces as the critical barrier to progress in bonding with the etch-and-rinse technique. The experimental biomimetic remineralisation strategy offers a creative solution for incorporating a progressive hydration mechanism to achieve this goal, which warrants its translation into a clinically applicable technique.

Effect of biomimetic remineralization on the dynamic nanomechanical properties of dentin hybrid layers.

The mineral and organic phases of mineralized dentin contribute co-operatively to its strength and toughness. This study tested the null hypothesis that there is no difference in nano-dynamic mechanical behavior (complex modulus-E*; loss modulus-E′′; storage modulus-E′; in GPa) of dentin hybrid layers (baseline: E*, 3.86 ± 0.24; E′′, 0.23 ± 0.05; E′, 3.85 ± 0.24) created by an etch-and-rinse adhesive in the presence or absence of biomimetic remineralization after in vitro aging. Using scanning probe microscopy and nano-dynamic mechanical analysis, we demonstrated that biomimetic remineralization restored the nano-dynamic mechanical behavior of heavily remineralized, resin-sparse regions of dentin hybrid layers (E*, 19.73 ± 3.85; E′′, 8.75 ± 3.97; E′, 16.02 ± 2.58) to those of the mineralized dentin base (E*, 19.20 ± 2.42; E′′, 6.57 ± 1.96; E′, 17.39 ± 2.0) [p > 0.05]. Conversely, those resin-sparse, water-rich regions degraded in the absence of biomimetic remineralization, with significant decline [p < 0.05] in their complex and storage moduli (E*, 0.83 ± 0.35; E′′, 0.88 ± 0.24; E′, 0.62 ± 0.32). Intrafibrillar apatite deposition preserves the integrity of resin-sparse regions of hybrid layers by restoring their nanomechanical properties to those exhibited by mineralized dentin.

Localization of MMP-2, MMP-9, TIMP-1, and TIMP-2 in human coronal dentine

OBJECTIVESnMatrix metalloproteinases (MMPs) and their inhibitors (TIMPs) play important roles in dentine formation, caries progression and hybrid layer degradation. This study tested the hypothesis that the distribution and concentrations of MMP-2, MMP-9, TIMP-1 and TIMP-2 are different at different depths of human coronal dentine, including odontoblasts.nnnMETHODSnProtein localization was performed using immunohistochemistry. Co-localization of the MMPs and their inhibitors was conducted using immunofluorescence double labelling. Protein concentrations were measured by ELISA and gelatinolytic potential was assessed with gelatine zymography.nnnRESULTSnMMP-2 was the main gelatinase in dentine and was concentrated in the odontoblasts, deep dentine and the dentinoenamel junction. TIMP-2 was co-localized with MMP-2 mainly in the odontoblasts but its concentration was low. Both MMP-9 and TIMP-1 showed a decreasing distribution from the deep to the superficial dentine layers; however, the concentration of TIMP-1 was much higher than that of MMP-9. The gelatinolytic potential of dentine protein extracts decreased gradually from deep to superficial dentine.nnnCONCLUSIONSnThe concentrations and distribution patterns of MMP-2, MMP-9, TIMP-1 and TIMP-2, and the gelatinolytic potential of dentine matrix are variable along different dentine depths. Thus, differential collagen degradation potentials may be expected depending upon the depth in which dentine is exposed.

Tetrapod-like Zinc Oxide Whisker Enhancement of Resin Composite

There is an increasing demand for composite resins with both strong antibacterial activity and satisfactory mechanical properties. This study tested the hypothesis that the new antibacterial agent tetrapod-like zinc oxide whisker (T-ZnOw) could simultaneously enhance the antibacterial activity and mechanical properties of a two-component composite resin. The antibacterial activities of the materials were assessed by the broth dilution test and direct contact test. Optical microscopy, scanning electron microscopy, and measurements of the flexural strength, compressive strength, and diametral tensile strength were carried out for mechanical characterization. The results revealed that T-ZnOw provided the resin with strong antibacterial activity and improved mechanical properties in all tested groups. However, the antibacterial activity of the resin with 10% T-ZnOw in the powder component significantly decreased after aging treatment. The incorporation of 5% T-ZnOw into the resin powder was optimal to give appropriate antibacterial activity, long-term antibacterial effectiveness, and mechanical properties.

Overexpressed TGF-β in Subchondral Bone Leads to Mandibular Condyle Degradation

Emerging evidence has implied that subchondral bone plays an important role during osteoarthritis (OA) pathology. This study was undertaken to investigate whether abnormalities of the condylar subchondral bone lead to temporomandibular joint (TMJ) OA. We used an osteoblast-specific mutant TGF-β1 transgenic mouse, the CED mouse, in which high levels of active TGF-β1 occur in bone marrow, leading to abnormal bone remodeling. Subchondral bone changes in the mandibular condyles were investigated by micro-CT, and alterations in TMJ condyles were confirmed by histopathological and immunohistochemical analysis. Abnormalities in the condylar subchondral bone, characterized as fluctuant bone mineral density and microstructure and increased but uncoupled activity of osteoclasts and osteoblasts, were apparent in the 1- and 4-month CED mouse groups, while obvious cartilage degradation, in the form of cell-free regions and proteoglycan loss, was observed in the 4-month CED group. In addition, increased numbers of apoptotic chondrocytes and MMP9- and VEGF-positive chondrocytes were observed in the condylar cartilage in the 4-month CED group, but not in the 1-month CED group, compared with their respective age-matched controls. This study demonstrated that progressive degradation of mandibular condylar cartilage could be induced by the abnormal remodeling of the underlying subchondral bone during TMJOA progression.

Efficacy of 3D conforming nickel titanium rotary instruments in eliminating canal wall bacteria from oval-shaped root canals

OBJECTIVESnTo evaluate the effectiveness of TRUShape® 3D Conforming Files, compared with Twisted Files, in reducing bacteria load from root canal walls, in the presence or absence of irrigant agitation.nnnMETHODSnExtracted human premolars with single oval-shaped canals were infected with Enterococcus faecalis. Teeth in Group I (N=10; NaOCl and QMix® 2in1 as respective initial and final irrigants) were subdivided into 4 subgroups: (A) TRUShape® instrumentation without irrigant activation; (B) TRUShape® instrumentation with sonic irrigant agitation; (C) Twisted Files without irrigant agitation; (D) Twisted Files with sonic irrigant agitation. To remove confounding factor (antimicrobial irrigants), teeth in Group II (N=10) were irrigated with sterile saline, using the same subgroup designations. Specimens before and after chemomechanical débridement were cultured for quantification of colony-forming units (CFUs). Data from each group were analyzed separately using two-factor ANOVA and Holm-Sidak multiple comparison (α=0.05). Canal wall bacteria were qualitatively examined using scanning electron microscopy (SEM) and light microscopy of Taylor-modified Brown and Brenn-stained demineralised sections.nnnRESULTSnCFUs from subgroups in Group I were not significantly different (P=0.935). For Group II, both file type (P<0.001) and irrigant agitation (P<0.001) significantly affected log-reduction in CFU concentrations. The interaction of these two factors was not significant (P=0.601). Although SEM showed reduced canal wall bacteria, bacteria were present within dentinal tubules after rotary instrumentation, as revealed by light microscopy of longitudinal root sections.nnnCONCLUSIONSnTRUShape® files removed significantly more canal wall bacteria than Twisted Files when used without an antibacterial irrigant; the latter is required to decontaminate dentinal tubules.nnnCLINICAL SIGNIFICANCEnRoot canal disinfection should not be focused only on a mechanistic approach. Rather, the rational choice of a rotary instrumentation system should be combined with the use of well-tested antimicrobial irrigants and delivery/agitation techniques to establish a clinically realistic chemomechanical débridement protocol.

Effect of a novel quaternary ammonium silane on dentin protease activities

OBJECTIVESnDemineralized dentin collagen release C-terminal cross-linked telopeptide (ICTP) and C-terminal peptide (CTX) during degradation. The present study evaluated the effects of dentin pre-treatment with K21, a quaternary ammonium silane (QAS), on matrix metalloproteinase (MMP) and cathepsin K-mediated collagen degradation.nnnMETHODSnDentin beams were demineralized with 10% H3PO4 for 24h. After baseline dry mass measurements, the beams were divided into 5 groups (N=10) according to protease inhibitors. The beams were pre-treated for 2min with 2% chlorhexidine (CHX), 2%, 5% or 10% QAS; no pre-treatment was performed for the control group. The beams were subsequently incubated in calcium- and zinc-containing medium for 3, 7 or 14days, after which changes in dry mass were measured and incubation media were examined for ICTP and CTX release. The MMP-2 and cathepsin K activities in QAS-treated dentin powder were also quantified using ELISA.nnnRESULTSnThe two factors (disinfectants and time) had a significant effect on dry mass loss, ICTP and CTX release (p<0.001). The percentage of dry mass loss increased with time and was significantly lower in all experimental groups when compared to the control at 14days (p<0.001). Conversely, the rate of ICTP and CTX release was significantly lower in the experimental groups, compared to the uninhibited control at 7 and 14days (p<0.001). Dentinal MMP-2 and cathepsin K activities were significantly reduced after demineralized dentin was pre-treated with QAS.nnnCONCLUSIONnThe experimental QAS is a good inhibitor of MMP and cathepsin K activities in demineralized dentin.nnnCLINICAL SIGNIFICANCEnThe newly developed antibacterial quaternary ammonium silane increases the resistance of dentin collagen to degradation by inhibiting endogenous matrix metalloproteinases and cysteine cathepsins. The quaternary ammonium silane cavity disinfectant is promising for use as a protease inhibitor to improve durability of resin-dentin bonds.

Paucity of Nanolayering in Resin-Dentin Interfaces of MDP-based Adhesives

Self-assembled nanolayering structures have been reported in resin-dentin interfaces created by adhesives that contain 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP). These structures have been hypothesized to contribute to bond durability. The objective of the present study was to determine the extent of nanolayering in resin-dentin interfaces after application of commercialized 10-MDP-containing self-etch and universal adhesives to human dentin. Seven commercialized adhesives were examined: Adhese Universal (Ivoclar-Vivadent), All-Bond Universal (Bisco, Inc.), Clearfil SE Bond 2, Clearfil S3 Bond Plus, Clearfil Universal Bond (all from Kuraray Noritake Dental Inc.), G-Premio Bond (GC Corp.), and Scotchbond Universal (3M ESPE). Each adhesive was applied in the self-etch mode on midcoronal dentin according to the respective manufacturer’s instructions. Bonded specimens (n = 6) were covered with flowable resin composite, processed for transmission electron microscopy, and examined at 30 random sites without staining. Thin-film glancing angle X-ray diffraction (XRD) was used to detect the characteristic peaks exhibited by nanolayering (n = 4). The control consisted of 15%wt, 10%wt, and 5%wt 10-MDP (DM Healthcare Products, Inc.) dissolved in a mixed solvent (ethanol and water weight ratio 9:8, with photoinitiators). Experimental primers were applied to dentin for 20 s, covered with hydrophobic resin layer, and examined in the same manner. Profuse nanolayering with highly ordered periodicity (~3.7 nm wide) was observed adjacent to partially dissolved apatite crystallites in dentin treated with the 15% 10-MDP primer. Three peaks in the 2θ range of 2.40° (3.68 nm), 4.78° (1.85 nm), and 7.18° (1.23 nm) were identified from thin-film XRD. Reduction in the extent of nanolayering was observed in the 10% and 5% 10-MDP experimental primer-dentin interface along with lower intensity XRD peaks. Nanolayering and characteristic XRD peaks were rarely observed in specimens prepared from the commercialized adhesives. The sparsity of nanolayering in resin-dentin interfaces created by commercialized adhesives challenges its clinical effectiveness as a mechanism for improving bond longevity in dentin bonding.

Norepinephrine Regulates Condylar Bone Loss via Comorbid Factors

Degenerative changes of condylar subchondral bone occur frequently in temporomandibular disorders. Although psychologic stresses and occlusal abnormalities have been implicated in temporomandibular disorder, it is not known if these risks represent synergistic comorbid factors that are involved in condylar subchondral bone degradation that is regulated by the sympathetic nervous system. In the present study, chronic immobilization stress (CIS), chemical sympathectomy, and unilateral anterior crossbite (UAC) were sequentially applied in a murine model. Norepinephrine contents in the subjects’ serum and condylar subchondral bone were detected by ELISA; bone and cartilage remodeling parameters and related gene expression in the subchondral bone were examined. Subchondral bone loss and increased subchondral bone norepinephrine level were observed in the CIS and UAC groups. These groups exhibited decreased bone mineral density, volume fraction, and bone formation rate; decreased expressions of osterix, collagen I, and osteocalcin; but increased trabecular separation, osteoclast number and surface, and RANKL expression. Combined CIS + UAC produced more severe subchondral bone loss, higher bone norepinephrine level, and decreased chondrocyte density and cartilage thickness when compared to CIS or UAC alone. Sympathectomy simultaneously prevented subchondral bone loss and decreased bone norepinephrine level in all experimental subgroups when compared to the vehicle-treated counterparts. Norepinephrine also decreased mRNA expression of osterix, collagen I, and osteocalcin by mesenchymal stem cells at 7 and 14 d of stimulation and increased the expression of RANKL and RANKL/OPG ratio by mesenchymal stem cells at 2 h. In conclusion, CIS and UAC synergistically promote condylar subchondral bone loss and cartilage degradation; such processes are partially regulated by norepinephrine within subchondral bone.