Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Lincoln J. Lauhon is active.

Publication


Featured researches published by Lincoln J. Lauhon.


Nature | 2002

Growth of nanowire superlattice structures for nanoscale photonics and electronics

Mark S. Gudiksen; Lincoln J. Lauhon; Jianfang Wang; David C. Smith; Charles M. Lieber

The assembly of semiconductor nanowires and carbon nanotubes into nanoscale devices and circuits could enable diverse applications in nanoelectronics and photonics. Individual semiconducting nanowires have already been configured as field-effect transistors, photodetectors and bio/chemical sensors. More sophisticated light-emitting diodes (LEDs) and complementary and diode logic devices have been realized using both n- and p-type semiconducting nanowires or nanotubes. The n- and p-type materials have been incorporated in these latter devices either by crossing p- and n-type nanowires or by lithographically defining distinct p- and n-type regions in nanotubes, although both strategies limit device complexity. In the planar semiconductor industry, intricate n- and p-type and more generally compositionally modulated (that is, superlattice) structures are used to enable versatile electronic and photonic functions. Here we demonstrate the synthesis of semiconductor nanowire superlattices from group III–V and group IV materials. (The superlattices are created within the nanowires by repeated modulation of the vapour-phase semiconductor reactants during growth of the wires.) Compositionally modulated superlattices consisting of 2 to 21 layers of GaAs and GaP have been prepared. Furthermore, n-Si/p-Si and n-InP/p-InP modulation doped nanowires have been synthesized. Single-nanowire photoluminescence, electrical transport and electroluminescence measurements show the unique photonic and electronic properties of these nanowire superlattices, and suggest potential applications ranging from nano-barcodes to polarized nanoscale LEDs.


Nature | 2002

Epitaxial core–shell and core–multishell nanowire heterostructures

Lincoln J. Lauhon; Mark S. Gudiksen; Deli Wang; Charles M. Lieber

Semiconductor heterostructures with modulated composition and/or doping enable passivation of interfaces and the generation of devices with diverse functions. In this regard, the control of interfaces in nanoscale building blocks with high surface area will be increasingly important in the assembly of electronic and photonic devices. Core–shell heterostructures formed by the growth of crystalline overlayers on nanocrystals offer enhanced emission efficiency, important for various applications. Axial heterostructures have also been formed by a one-dimensional modulation of nanowire composition and doping. However, modulation of the radial composition and doping in nanowire structures has received much less attention than planar and nanocrystal systems. Here we synthesize silicon and germanium core–shell and multishell nanowire heterostructures using a chemical vapour deposition method applicable to a variety of nanoscale materials. Our investigations of the growth of boron-doped silicon shells on intrinsic silicon and silicon–silicon oxide core–shell nanowires indicate that homoepitaxy can be achieved at relatively low temperatures on clean silicon. We also demonstrate the possibility of heteroepitaxial growth of crystalline germanium–silicon and silicon–germanium core–shell structures, in which band-offsets drive hole injection into either germanium core or shell regions. Our synthesis of core–multishell structures, including a high-performance coaxially gated field-effect transistor, indicates the general potential of radial heterostructure growth for the development of nanowire-based devices.


Applied Physics Letters | 2001

Diameter-controlled synthesis of single-crystal silicon nanowires

Yi Cui; Lincoln J. Lauhon; Mark S. Gudiksen; Jianfang Wang; Charles M. Lieber

Monodisperse silicon nanowires were synthesized by exploiting well-defined gold nanoclusters as catalysts for one-dimensional growth via a vapor–liquid–solid mechanism. Transmission electron microscopy studies of the materials grown from 5, 10, 20, and 30 nm nanocluster catalysts showed that the nanowires had mean diameters of 6, 12, 20, and 31 nm, respectively, and were thus well defined by the nanocluster sizes. High-resolution transmission electron microscopy demonstrated that the nanowires have single-crystal silicon cores sheathed with 1–3 nm of amorphous oxide and that the cores remain highly crystalline for diameters as small as 2 nm.


ACS Nano | 2014

Emerging device applications for semiconducting two-dimensional transition metal dichalcogenides.

Deep Jariwala; Vinod K. Sangwan; Lincoln J. Lauhon; Tobin J. Marks; Mark C. Hersam

With advances in exfoliation and synthetic techniques, atomically thin films of semiconducting transition metal dichalcogenides have recently been isolated and characterized. Their two-dimensional structure, coupled with a direct band gap in the visible portion of the electromagnetic spectrum, suggests suitability for digital electronics and optoelectronics. Toward that end, several classes of high-performance devices have been reported along with significant progress in understanding their physical properties. Here, we present a review of the architecture, operating principles, and physics of electronic and optoelectronic devices based on ultrathin transition metal dichalcogenide semiconductors. By critically assessing and comparing the performance of these devices with competing technologies, the merits and shortcomings of this emerging class of electronic materials are identified, thereby providing a roadmap for future development.


Nano Letters | 2014

Effective passivation of exfoliated black phosphorus transistors against ambient degradation.

Joshua D. Wood; Spencer A. Wells; Deep Jariwala; Kan Sheng Chen; Eunkyung Cho; Vinod K. Sangwan; Xiaolong Liu; Lincoln J. Lauhon; Tobin J. Marks; Mark C. Hersam

Unencapsulated, exfoliated black phosphorus (BP) flakes are found to chemically degrade upon exposure to ambient conditions. Atomic force microscopy, electrostatic force microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy are employed to characterize the structure and chemistry of the degradation process, suggesting that O2 saturated H2O irreversibly reacts with BP to form oxidized phosphorus species. This interpretation is further supported by the observation that BP degradation occurs more rapidly on hydrophobic octadecyltrichlorosilane self-assembled monolayers and on H-Si(111) versus hydrophilic SiO2. For unencapsulated BP field-effect transistors, the ambient degradation causes large increases in threshold voltage after 6 h in ambient, followed by a ∼ 10(3) decrease in FET current on/off ratio and mobility after 48 h. Atomic layer deposited AlOx overlayers effectively suppress ambient degradation, allowing encapsulated BP FETs to maintain high on/off ratios of ∼ 10(3) and mobilities of ∼ 100 cm(2) V(-1) s(-1) for over 2 weeks in ambient conditions. This work shows that the ambient degradation of BP can be managed effectively when the flakes are sufficiently passivated. In turn, our strategy for enhancing BP environmental stability will accelerate efforts to implement BP in electronic and optoelectronic applications.


Chemical Society Reviews | 2013

Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing

Deep Jariwala; Vinod K. Sangwan; Lincoln J. Lauhon; Tobin J. Marks; Mark C. Hersam

In the last three decades, zero-dimensional, one-dimensional, and two-dimensional carbon nanomaterials (i.e., fullerenes, carbon nanotubes, and graphene, respectively) have attracted significant attention from the scientific community due to their unique electronic, optical, thermal, mechanical, and chemical properties. While early work showed that these properties could enable high performance in selected applications, issues surrounding structural inhomogeneity and imprecise assembly have impeded robust and reliable implementation of carbon nanomaterials in widespread technologies. However, with recent advances in synthesis, sorting, and assembly techniques, carbon nanomaterials are experiencing renewed interest as the basis of numerous scalable technologies. Here, we present an extensive review of carbon nanomaterials in electronic, optoelectronic, photovoltaic, and sensing devices with a particular focus on the latest examples based on the highest purity samples. Specific attention is devoted to each class of carbon nanomaterial, thereby allowing comparative analysis of the suitability of fullerenes, carbon nanotubes, and graphene for each application area. In this manner, this article will provide guidance to future application developers and also articulate the remaining research challenges confronting this field.


Nature Nanotechnology | 2008

High-resolution detection of Au catalyst atoms in Si nanowires

Jonathan E. Allen; Eric R. Hemesath; Daniel E. Perea; Jessica L. Lensch-Falk; Z. Y. Li; Feng Yin; Mhairi Gass; Peng Wang; Andrew Bleloch; Richard E. Palmer; Lincoln J. Lauhon

The potential for the metal nanocatalyst to contaminate vapour-liquid-solid grown semiconductor nanowires has been a long-standing concern, because the most common catalyst material, Au, is highly detrimental to the performance of minority carrier electronic devices. We have detected single Au atoms in Si nanowires grown using Au nanocatalyst particles in a vapour-liquid-solid process. Using high-angle annular dark-field scanning transmission electron microscopy, Au atoms were observed in higher numbers than expected from a simple extrapolation of the bulk solubility to the low growth temperature. Direct measurements of the minority carrier diffusion length versus nanowire diameter, however, demonstrate that surface recombination controls minority carrier transport in as-grown n-type nanowires; the influence of Au is negligible. These results advance the quantitative correlation of atomic-scale structure with the properties of nanomaterials and can provide essential guidance to the development of nanowire-based device technologies.


Nature Nanotechnology | 2009

Direct measurement of dopant distribution in an individual vapour–liquid–solid nanowire

Daniel E. Perea; Eric R. Hemesath; Edwin J. Schwalbach; Jessica L. Lensch-Falk; Peter W. Voorhees; Lincoln J. Lauhon

Semiconductor nanowires show promise for many device applications, but controlled doping with electronic and magnetic impurities remains an important challenge. Limitations on dopant incorporation have been identified in nanocrystals, raising concerns about the prospects for doping nanostructures. Progress has been hindered by the lack of a method to quantify the dopant distribution in single nanostructures. Recently, we showed that atom probe tomography can be used to determine the composition of isolated nanowires. Here, we report the first direct measurements of dopant concentrations in arbitrary regions of individual nanowires. We find that differences in precursor decomposition rates between the liquid catalyst and solid nanowire surface give rise to a heavily doped shell surrounding an underdoped core. We also present a thermodynamic model that relates liquid and solid compositions to dopant fluxes.


Applied Physics Letters | 2004

Growth and transport properties of complementary germanium nanowire field-effect transistors

Andrew B. Greytak; Lincoln J. Lauhon; Mark S. Gudiksen; Charles M. Lieber

n- and p-type Ge nanowires were synthesized by a multistep process in which axial elongation, via vapor–liquid–solid (VLS) growth, and doping were accomplished in separate chemical vapor deposition steps. Intrinsic, single-crystal, Ge nanowires prepared by Au nanocluster-mediated VLS growth were surface-doped in situ using diborane or phosphine, and then radial growth of an epitaxial Ge shell was used to cap the dopant layer. Field-effect transistors prepared from these Ge nanowires exhibited on currents and transconductances up to 850 μA/μm and 4.9 μA/V, respectively, with device yields of >85%.


Applied Physics Letters | 2013

Band-like transport in high mobility unencapsulated single-layer MoS 2 transistors

Deep Jariwala; Vinod K. Sangwan; Dattatray J. Late; James E. Johns; Vinayak P. Dravid; Tobin J. Marks; Lincoln J. Lauhon; Mark C. Hersam

Ultra-thin MoS2 has recently emerged as a promising two-dimensional semiconductor for electronic and optoelectronic applications. Here, we report high mobility (>60 cm2/Vs at room temperature) field-effect transistors that employ unencapsulated single-layer MoS2 on oxidized Si wafers with a low level of extrinsic contamination. While charge transport in the sub-threshold regime is consistent with a variable range hopping model, monotonically decreasing field-effect mobility with increasing temperature suggests band-like transport in the linear regime. At temperatures below 100 K, temperature-independent mobility is limited by Coulomb scattering, whereas, at temperatures above 100 K, phonon-limited mobility decreases as a power law with increasing temperature.

Collaboration


Dive into the Lincoln J. Lauhon's collaboration.

Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

W. Ho

University of California

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar

J. L. Lensch

Northwestern University

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Researchain Logo
Decentralizing Knowledge