Linden Servinis

A novel approach to functionalise pristine unsized carbon fibre using in situ generated diazonium species to enhance interfacial shear strength

Complex molecules have been successfully grafted onto the surface of unsized carbon fibre, a heterogeneous material which is a challenge to functionalise. The in situ generation of highly reactive phenyldiazo-species from their corresponding anilines was employed to achieve this task. The success of an initial proof-of-concept study (bearing a nitro moiety) supported by X-ray Photoelectron Spectroscopy (XPS) and physical characterisation, led to the design and synthesis of a more complex compound possessing a pendant amine moiety which could theoretically react with an epoxide based resin. After attachment to unsized oxidised fibres, analysis by XPS of the resulting fibres (fluorine used as an XPS tag) indicated a marked difference in functionalisation success which was attributed to steric factors, shown to be critical in influencing the attachment of the phenyldiazo-intermediate to the carbon fibre surface. Analysis of key fibre performance parameters of these fibres showed no change in elastic modulus, strength, surface topography or microscopic roughness when compared to the control unsized oxidised fibres. The functionalised fibres did however show a large increase in coefficient of friction. Single fibre fragmentation tests indicated a marked increase in interfacial shear strength, which was attributed to the pendent amine functionalities interacting with the epoxy resin.

Tailoring the fibre-to-matrix interface using click chemistry on carbon fibre surfaces

A convenient and effective strategy to control the surface chemistry of carbon fibres is presented, comprising electro-chemical reduction of aryl diazonium salts onto the surface, followed by ‘click chemistry’ to tether the desired surface characteristic of choice. The power of this approach was demonstrated by engineering a small-molecule interface between carbon fibre and an epoxy matrix improving interfacial shear strength by up to 220%, relative to unmodified control fibres. The techniques used in this work do not impede the fibre performance in tensile strength or Youngs modulus. This work provides a platform upon which any carbon fibre-to-resin interface can be easily and rapidly designed and implemented.

Rapid surface functionalization of carbon fibres using microwave irradiation in an ionic liquid

The modification of carbon fibre surfaces has been achieved using a novel combination of low power microwave irradiation (20 W) in both an ionic liquid (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) and an organic solvent (1,2-dichlorobenzene). The use of the ionic liquid was superior to the organic solvent in this application, resulting in a higher density of surface grafted material. As a consequence, carbon fibres treated in the ionic liquid displayed improved interfacial adhesion in the composite material (+28% relative to untreated fibres) compared to those treated in organic solvent (+18%). The methodology presented herein can be easily scaled up to industrially relevant quantities and represent a drastic reduction in both reaction time (30 min from 24 h) and energy consumption, compared to previously reported procedures. This work opens the door to potential energy and time saving strategies which can be applied to carbon fibre manufacture for high performance carbon fibre reinforced composites.

A Novel Approach to the Functionalisation of Pristine Carbon Fibre Using Azomethine 1,3-Dipolar Cycloaddition

We demonstrate the utilisation of an azomethine 1,3-dipolar cycloaddition reaction with carbon fibre to graft complex molecules onto the fibre surface. In an effort to enhance the interfacial interaction of the fibre to the matrix, the functionalised fibres possessed a pendant amine that is able to interact with epoxy resins. Functionalisation was supported by X-ray photoelectron spectroscopy and the grafting process had no detrimental effects on tensile strength compared with the control (untreated) fibres. Also, microscopic roughness (as determined by atomic force microscopy) and fibre topography were unchanged after the described treatment process. This methodology complements existing methodology aimed at enhancing the surface of carbon fibres for advanced material applications while not compromising the desirable strength profile. Single-fibre fragmentation tests show a statistically significant decrease in fragment length compared with the control fibres in addition to transverse cracking within the curing resin, both of which indicate an enhanced interaction between fibre and resin.

A comparative assessment of α-lipoic acid N-phenylamides as non-steroidal androgen receptor antagonists both on and off gold nanoparticles

A group of α-lipoic acid N-phenylamides were synthesized employing a variety of amide coupling protocols utilizing electron deficient anilines. These compounds were then assessed for their ability to block androgen-stimulated proliferation of a human prostate cancer cell line, LNCaP. These structurally simple compounds displayed anti-proliferative activities at, typically, 5-20 μM concentrations and were comparable to a commonly used anti-androgen Bicalutamide®. The inclusion of a disulfide (RS-SR) moiety, serving as an anchor to several metal nanoparticle systems (Au, Ag, Fe(2)O(3), etc.), does not impede any biological activity. Conjugation of these compounds to a gold nanoparticle surface resulted in a high degree of cellular toxicity, attributed to the absence of a biocompatible group such as PEG within the organic scaffold.

Synergistic interfacial effects of ionic liquids as sizing agents and surface modified carbon fibers

This paper presents investigations into the use of ionic liquids as sizing agents for carbon fibers in epoxy matrices. A variety of aqueous ionic liquid solutions was employed as the sizing bath, at concentrations relevant to industry standards. Of the ionic liquids used, the widely available and inexpensive BmimCl was found to give the optimal fiber-to-matrix adhesion improvements of 250% relative to control fibers in epoxy, and 66% improvement in polypropylene. Molecular dynamics simulations suggest that the diffusion of the ionic liquids into the polymer phase accompanied by self-agglomeration generates a plasticised interphase resulting in high shear tolerant materials.

Methyl 3-[4-(4-nitro­benz­yloxy)phen­yl]propano­ate

The title compound, C17H17NO5, crystallizes with two molecules (A and B) in the asymmetric unit. The conformational structures of the two molecules show small but significant differences in the dihedral angles between the two aryl rings with values of 18.8 (1)° for molecule A and 7.5 (1)° for molecule B. In molecule A, the propanoate group is twisted out of the plane of the benzene group [Car—Car—C—C torsion angle = −44.9 (2)°], while for molecule B, this group lies closer to the plane [Car—Car—C—C torsion angle = 8.6 (3)°]. C—H⋯O interactions characterize the crystal-packing interactions in this compound.