Liying Bin

Essential factors of an integrated moving bed biofilm reactor–membrane bioreactor: Adhesion characteristics and microbial community of the biofilm

This work aims at revealing the adhesion characteristics and microbial community of the biofilm in an integrated moving bed biofilm reactor-membrane bioreactor, and further evaluating their variations over time. With multiple methods, the adhesion characteristics and microbial community of the biofilm on the carriers were comprehensively illuminated, which showed their dynamic variation along with the operational time. Results indicated that: (1) the roughness of biofilm on the carriers increased very quickly to a maximum value at the start-up stage, then, decreased to become a flat curve, which indicated a layer of smooth biofilm formed on the surface; (2) the tightly-bound protein and polysaccharide was the most important factor influencing the stability of biofilm; (3) the development of biofilm could be divided into three stages, and Gammaproteobacteria were the most dominant microbial species in class level at the last stage, which occupied the largest ratio (51.48%) among all microbes.

Biodiversity and succession of microbial community in a multi-habitat membrane bioreactor

The present study focused on establishing a multi-habitat membrane bioreactor, as well as exploring its biodiversity and succession of microbial communities. In a long-term operational period (100 days), the dissolved oxygen level of a local zone within the bioreactor decreased consistently from the original oxic state to the final anaerobic state, which led to a continuous succession of the microbial community in the bioreactor. The results revealed that the biodiversity of the microbial community in different zones simultaneously increased, with a similar microbial composition in their final successional stage. The results also indicated that the dominant species during the whole operation were distributed among 6 major phyla. At the initial operational stages, the dominant species in the anoxic-anaerobic and the oxic zones exhibited distinguished difference, whereas at the final operational stage, both zones presented nearly the same dominant microbial species and a rather similar structure in their microbial communities.

Comparative analysis of two 16S rRNA gene-based PCR primer sets provides insight into the diversity distribution patterns of anammox bacteria in different environments

Due to the high divergence among 16S rRNA genes of anammox bacteria, different diversity pattern of the community could be resulted from using different primer set. In this study, the efficiencies and specificities of two commonly used sets, Amx368F/Amx820R and Brod541F/Amx820R, were evaluated by exploring the diversity characteristics of anammox bacteria in sediments from marine, estuary, and freshwater wetland. Statistical analysis indicated that the base mispairing rate between bases on 16S rRNA gene sequences retrieved by Amx368F/Amx820R and their corresponding ones on primer Brod541F was quite high, suggesting the different efficiency and specificity of Amx368F/Amx820R and Brod541F/Amx820R. Further experimental results demonstrated that multiple genera of anammox bacteria, including Ca. Scalindua, Ca. Brocadia, and Ca. Kuenenia, were able to be detected by Amx368F/Amx820R, but only Ca. Scalindua could be retrieved by Brod541F/Amx820R. Moreover, the phylogenetic clusters of Ca. Scalindua by Amx368F/Amx820R were different completely from those by Brod541F/Amx820R, presenting a significant complementary effect. By joint application of these two primer sets, the diversity distribution patterns of anammox bacteria in different environments were analyzed. Almost all retrieved sequences from marine sediments belonged to Ca. Scalindua. Sequences from freshwater wetland were affiliated to Ca. Brocadia and two new clusters, while high diversity of anammox bacteria was found in estuary, including Ca. Scalindua, Ca. Brocadia, and Ca. Kuenenia, corresponding to the river-sea intersection environmental feature. In total, these two prime sets have different characteristic for anammox bacteria detecting from environmental samples, and their combined application could achieve better diversity display of anammox community.

A new insight into resource recovery of excess sewage sludge: feasibility of extracting mixed amino acids as an environment-friendly corrosion inhibitor for industrial pickling.

The work mainly presented a laboratory-scale investigation on an effective process to extract a value-added product from municipal excess sludge. The functional groups in the hydrolysate were characterized with Fourier transform infrared spectrum, and the contained amino acids were measured by means of an automatic amino acid analyzer. The corrosion-inhibition characteristics of the hydrolysate were determined with weight-loss measurement, electrochemical polarization and scanning electron microscopy. Results indicated that the hydrolysate contained 15 kinds of amino acid, and their adsorption on the surface could effectively inhibit the corrosion reaction of the steel from the acid medium. Polarization curves indicated that the obtained hydrolysate was a mixed-type inhibitor, but mainly restricted metal dissolution on the anode. The adsorption accorded well with the Langmuir adsorption isotherm, involved an increase in entropy, and was a spontaneous, exothermic process.

A rapid and high-throughput microplate spectrophotometric method for field measurement of nitrate in seawater and freshwater

The well-known zinc-cadmium reduction method is frequently used for determination of nitrate. However, this method is seldom to be applied on field research of nitrate due to the long time consuming and large sample volume demand. Here, we reported a modified zinc-cadmium reduction method (MZCRM) for measurement of nitrate at natural-abundance level in both seawater and freshwater. The main improvements of MZCRM include using small volume disposable tubes for reaction, a vortex apparatus for shaking to increase reduction rate, and a microplate reader for high-throughput spectrophotometric measurements. Considering salt effect, two salinity sections (5~10 psu and 20~35 psu) were set up for more accurate determination of nitrate in low and high salinity condition respectively. Under optimized experimental conditions, the reduction rates were stabilized on 72% and 63% on the salinity of 5 and 20 psu respectively. The lowest detection limit for nitrate was 0.5 μM and was linear up to 100 μM (RSDs was 4.8%). Environmental samples assay demonstrated that MZCRM was well consistent with conventional zinc-cadmium reduction method. In total, this modified method improved accuracy and efficiency of operations greatly, and would be realized a rapid and high-throughput determination of nitrate in field analysis of nitrate with low cost.

Distribution and mass transfer of dissolved oxygen in a multi-habitat membrane bioreactor

This work investigated the DO distribution and the factors influencing the mass transfer of DO in a multi-habitat membrane bioreactor. Through the continuous measurements of an on-line automatic system, the timely DO values at different zones in the bioreactor were obtained, which gave a detailed description to the distribution of oxygen within the bioreactor. The results indicated that the growth of biomass had an important influence on the distribution of oxygen. As the extension of operational time, the volumetric oxygen mass transfer coefficient (kLa) was generally decreased. With the difference in DO values, a complex environment combining anoxic and oxic state was produced within a single bioreactor, which provided a fundamental guarantee for the total removal of TN. Aeration rate, the concentration and apparent viscosity of MLSS have different influences on kLa, but adjusting the viscosity is a feasible method to improve the mass transfer of oxygen in the bioreactor.

Determination of the profile of DO and its mass transferring coefficient in a biofilm reactor packed with semi-suspended bio-carriers

The work aims at illustrating the profile of DO and its mass transferring process in a biofilm reactor packed with a novel semi-suspended bio-carrier, and further revealing the main factors that influence the mass transferring coefficient of DO within the biofilm. Results showed that the biofilm was very easy to attach and grow on the semi-suspended bio-carrier, which obviously changed the DO profile inside and outside the biofilm. The semi-suspended bio-carrier caused three different mass transfer zones occurring in the bioreactor, including the zones of bulk solution, boundary layer and biofilm, in which, the boundary layer zone had an obvious higher mass transfer resistance. Increasing the aeration rate might improve the hydrodynamic conditions in the bioreactor and accelerate the mass transfer of DO, but it also detached the biofilm from the surface of bio-carrier, which reduced the consumption of DO, and accordingly, decreased the DO gradient in the bioreactor.

Insight into the microbial community and its succession of a coupling anaerobic-aerobic biofilm on semi-suspended bio-carriers

This work aims at establishing a coupling anaerobic-aerobic biofilm within a single bioreactor and revealing its microbial community and succession. By using a semi-suspended bio-carrier fabricated with 3D printing technique, an obvious DO gradient was gradually created within the biofilm, which demonstrated that a coupling anaerobic-aerobic biofilm was successfully established on the surface of bio-carriers. The results of metagenomic analysis revealed that the microbial community on the bio-carriers experienced a continuous succession in its structure and dominant species along with the operational time. The formed coupling biofilm created suitable micro multi-habitats for the co-existence of these microorganisms, including nitrifying and denitrifying bacteria, which were beneficial to the removing of organic pollutants and converting nutrients. Along with the succession, the microbial community was gradually dominated by several functional microorganisms. Overall, the results presented an approach to improve the microbial biodiversity by constructing a new structure and floating status of bio-carriers.

Variation of the characteristics of biofilm on the semi-suspended bio-carrier produced by a 3D printing technique: Investigation of a whole growing cycle

The presented investigation focused on exploring the characteristics of the biofilm formed on a novel semi-suspended bio-carrier and revealing their variation during the whole growing cycle. This used semi-suspended bio-carrier was designed to be a spindle shape, and then fabricated by using a 3D printing technique. Results indicated the bio-carrier provided a suitable environment for the attachment of diverse microorganisms. During the experimental period lasted for 45days, the biofilm quickly attached on the surface of the bio-carrier and grew to maturity, but its characteristics, including the chemical compositions, adhesion force, surface roughness, structure of microbial communities, varied continuously along with the operational time, which greatly influenced the performance of the bioreactor. The shape and structure of bio-carrier, and the shearing force caused by the aeration are important factors that influence the microbial community and its structure, and also heavily affect the formation and growth of biofilm.

Heterogeneity of the diverse aerobic sludge granules self-cultivated in a membrane bioreactor with enhanced internal circulation

The present work revealed the heterogeneity of the sludge granules formed in a membrane bioreactor with enhanced internal circulation, and also contributed to better understanding of their forming mechanisms. By continuously carrying out an experiment lasting for more than 3 months with the floc sludge from a local municipal wastewater treatment plant as inoculation sludge, diverse aerobic sludge granules were found to be successfully self-cultivated within the reactor. The results of scanning electron microscopy, fluorescence microscope and high-throughput sequencing measurement indicated that the obtained diverse granules exhibited quite obvious heterogeneity in their basic physico-chemical and microbial properties, and filamentous bacteria actually acted as a main skeleton to keep the self-cultivated sludge granules stable in both their structure and morphology. Furthermore, stable and high COD and TN removal achieved, over 85% and 60%, respectively, which confirmed its usefulness in wastewater treatment.