Lonnie D. Shea

DNA delivery from polymer matrices for tissue engineering.

We have proposed engineering tissues by the incorporation and sustained release of plasmids encoding tissue-inductive proteins from polymer matrices. Matrices of poly(lactide-co-glycolide) (PLG) were loaded with plasmid, which was subsequently released over a period ranging from days to a month in vitro. Sustained delivery of plasmid DNA from matrices led to the transfection of large numbers of cells. Furthermore, in vivo delivery of a plasmid encoding platelet-derived growth factor enhanced matrix deposition and blood vessel formation in the developing tissue. This contrasts with direct injection of the plasmid, which did not significantly affect tissue formation. This method of DNA delivery may find utility in tissue engineering and gene therapy applications.

Bioabsorbable polymer scaffolds for tissue engineering capable of sustained growth factor delivery

Engineering new tissues utilizing cell transplantation on biodegradable polymer matrices is an attractive approach to treat patients suffering from the loss or dysfunction of a number of tissues and organs. The matrices must maintain structural integrity during the process of tissue formation, and promote the vascularization of the developing tissue. A number of molecules (angiogenic factors) have been identified that promote the formation of new vascular beds from endothelial cells present within tissues, and the localized, controlled delivery of these factors from a matrix may allow an enhanced vascularization of engineered tissues. We have developed a gas foaming polymer processing approach that allows the fabrication of three-dimensional porous matrices from bioabsorbable materials (e.g., copolymers of lactide and glycolide [PLG]) without the use of organic solvents or high temperatures. The effects of several processing parameters (e.g., gas type, polymer composition and molecular weight) on the process were studied. Several gases (CO(2), N(2), He) were utilized in the fabrication process, but only CO(2) resulted in the formation of highly porous, structurally intact matrices. Crystalline polymers (polylactide and polyglycolide) did not form porous matrices, while amorphous copolymers (50:50, 75:25, and 85:15 ratio of lactide:glycolide) foamed to yield matrices with porosity up to 95%. The mechanical properties of matrices were also regulated by the choice of PLG composition and molecular weight. Angiogenic factors (e.g., vascular endothelial growth factor) were subsequently incorporated into matrices during the fabrication process, and released in a controlled manner. Importantly, the released growth factor retains over 90% of its bioactivity. In summary, a promising system for the incorporation and delivery of angiogenic factors from three-dimensional, biodegradable polymer matrices has been developed, and the fabrication process allows incorporation under mild conditions.

Porous carriers for biomedical applications based on alginate hydrogels

Macroporous scaffolds are typically utilized in tissue engineering applications to allow for the migration of cells throughout the scaffold and integration of the engineered tissue with the surrounding host tissue. A method to form macroporous beads with an interconnected pore structure from alginate has been developed by incorporating gas pockets within alginate beads, stabilizing the gas bubbles with surfactants, and subsequently removing the gas. Macroporous scaffolds could be formed from alginate with different average molecular weights (5-200 kDa) and various surfactants. The gross morphology, amount of interconnected pores, and total void volume was investigated both qualitatively and quantitatively. Importantly, macroporous alginate beads supported cell invasion in vitro and in vivo.

Engineered Bone Development from a Pre-Osteoblast Cell Line on Three-Dimensional Scaffolds

Bone regeneration is based on the hypothesis that healthy progenitor cells, either recruited or delivered to an injured site, can ultimately regenerate lost or damaged tissue. Three-dimensional porous polymer scaffolds may enhance bone regeneration by creating and maintaining a space that facilitates progenitor cell migration, proliferation, and differentiation. As an initial step to test this possibility, osteogenic cells were cultured on scaffolds fabricated from biodegradable polymers, and bone development on these scaffolds was evaluated. Porous polymer scaffolds were fabricated from biodegradable polymers of lactide and glycolide. MC3T3-E1 cells were statically seeded onto the polymer scaffolds and cultured in vitro in the presence of ascorbic acid and beta-glycerol phosphate. The cells proliferated during the first 4 weeks in culture and formed a space-filling tissue. Collagen messenger RNA levels remained high in these cells throughout the time in culture, which is consistent with an observed increase in collagen deposition on the polymer scaffold. Mineralization of the deposited collagen was initially observed at 4 weeks and subsequently increased. The onset of mineralization corresponded to increased mRNA levels for two osteoblast-specific genes: osteocalcin and bone sialoprotein. Culture of cell/polymer constructs for 12 weeks led to formation of a three-dimensional tissue with architecture similar to that of native bone. These studies demonstrate that osteoblasts within a three-dimensional engineered tissue follow the classic differentiation pathway described for two-dimensional culture. Polymer scaffolds such as these may ultimately be used clinically to enhance bone regeneration by delivering or recruiting progenitor cells to the wound site.

In vitro grown human ovarian follicles from cancer patients support oocyte growth

BACKGROUND Young female adult and adolescent cancer patients facing life-preserving but fertility-threatening chemo- or radiation-therapy are increasingly seeking options to protect their reproductive potential. Ovarian tissue cryopreservation with transplantation is a promising technique to safeguard fertility in cancer patients. However, this method may risk re-introduction of the original cancer to the survivor of the disease. Thus, developing a method for in vitro growth of immature follicles may provide a method for fertility restoration in the future. METHODS Human secondary follicles were isolated from ovarian tissues obtained from cancer patients and grown in vitro within a bio-engineered culture system for 30 days. RESULTS Human ovarian follicles became steroidogenically active, and developed from the early secondary to antral stage in vitro. The follicles contained healthy, growing oocytes that were connected by transzonal projections between the somatic cells and oocyte. CONCLUSIONS Our data support the notion that human follicle development can be achieved in vitro in a bio-engineered culture system. More studies are required to investigate whether the fully sized oocytes obtained from in vitro grown follicle are competent to resume meiosis and be fertilized.

Microparticles bearing encephalitogenic peptides induce T-cell tolerance and ameliorate experimental autoimmune encephalomyelitis

Aberrant T-cell activation underlies many autoimmune disorders, yet most attempts to induce T-cell tolerance have failed. Building on previous strategies for tolerance induction that exploited natural mechanisms for clearing apoptotic debris, we show that antigen-decorated microparticles (500-nm diameter) induce long-term T-cell tolerance in mice with relapsing experimental autoimmune encephalomyelitis. Specifically, intravenous infusion of either polystyrene or biodegradable poly(lactide-co-glycolide) microparticles bearing encephalitogenic peptides prevents the onset and modifies the course of the disease. These beneficial effects require microparticle uptake by marginal zone macrophages expressing the scavenger receptor MARCO and are mediated in part by the activity of regulatory T cells, abortive T-cell activation and T-cell anergy. Together these data highlight the potential for using microparticles to target natural apoptotic clearance pathways to inactivate pathogenic T cells and halt the disease process in autoimmunity.

Controllable delivery of non-viral DNA from porous scaffolds.

The inductive approach to tissue engineering combines three-dimensional porous scaffolds with drug delivery to direct the action of progenitor cells into a functional tissue. We present an approach to fabricate scaffolds capable of controlled, sustained delivery by the assembly and subsequent fusion of drug-loaded microspheres using a gas foaming/particulate leaching process. DNA-loaded microspheres were fabricated from the copolymers of lactide and glycolide (PLG) using a cryogenic double emulsion process. Microspheres were fabricated in four populations with mean diameters ranging from 12.3 microm to 92.5 microm. Scaffolds fabricated by fusion of these microspheres had an interconnected open pore structure, maintained DNA integrity, and exhibited sustained release for 21 days. Control over the release was obtained through manipulating the properties of the polymer, microspheres, and the foaming process. Decreasing the microsphere diameter or the molecular weight of the polymer used for microsphere fabrication led to increased rates of release from the porous scaffold. Additionally, increasing the pressure of CO(2) increased the DNA release rate. The ability to create porous polymer scaffolds capable of controlled release rates may provide a means to enhance and regulate gene transfer within a developing tissue, which will increase their utility in tissue engineering.

Identification of a Stage-Specific Permissive In Vitro Culture Environment for Follicle Growth and Oocyte Development

Abstract The availability of viable oocytes is the limiting factor in the development of new reproductive techniques. Many attempts have been made to grow immature oocytes in vitro during recent decades. Recently, a modified alginate-based three-dimensional culture system was designed to support the growth and maturation of multilayered secondary follicles. This system was able to produce oocytes that successfully completed meiosis, fertilization, and development to the blastocyst stage. Subsequent attempts to culture two-layered secondary follicles were unsuccessful under the original conditions. Herein, we investigated the effect of alginate consistency on two-layered follicle growth and oocyte developmental competence by encapsulating follicles into alginate scaffolds of various concentrations. Although there were no significant differences in survival rates, 0.25% and 0.5% alginate supported more rapid growth of follicles and antrum formation compared with 1.5% and 1.0% alginate after 8 days of culture. Alginate scaffold concentration also affected the proliferation and differentiation of somatic cells (theca and granulosa cells), measured in terms of morphological changes, steroid profiles (androstenedione, estradiol, and progesterone), and specific molecular markers (Fshr, Lhcgr, and Gja1). Theca cell proliferation and steroid production were hindered in follicles cultured in 1.5% alginate. In vitro fertilization and embryo culture revealed that oocytes obtained from 0.25% alginate retained the highest developmental competence. Overall, the present study showed that the alginate scaffold consistency affects folliculogenesis and oocyte development in vitro and that the alginate culture system can and should be tailored to maximally support follicle growth depending on the size and stage of the follicles selected for culture.

Encapsulated Three-Dimensional Culture Supports Development of Nonhuman Primate Secondary Follicles

In vitro ovarian follicle cultures may provide fertility-preserving options to women facing premature infertility due to cancer therapies. An encapsulated three-dimensional (3-D) culture system utilizing biomaterials to maintain cell-cell communication and support follicle development to produce a mature oocyte has been developed for the mouse. We tested whether this encapsulated 3-D system would also support development of nonhuman primate preantral follicles, for which in vitro growth has not been reported. Three questions were investigated: Does the cycle stage at which the follicles are isolated affect follicle development? Does the rigidity of the hydrogel influence follicle survival and growth? Do follicles require luteinizing hormone (LH), in addition to follicle-stimulating hormone (FSH), for steroidogenesis? Secondary follicles were isolated from adult rhesus monkeys, encapsulated within alginate hydrogels, and cultured individually for ≤30 days. Follicles isolated from the follicular phase of the menstrual cycle had a higher survival rate (P < 0.05) than those isolated from the luteal phase; however, this difference may also be attributed to differing sizes of follicles isolated during the different stages. Follicles survived and grew in two hydrogel conditions (0.5% and 0.25% alginate). Follicle diameters increased to a greater extent (P < 0.05) in the presence of FSH alone than in FSH plus LH. Regardless of gonadotropin treatment, follicles produced estradiol, androstenedione, and progesterone by 14–30 days in vitro. Thus, an alginate hydrogel maintains the 3-D structure of individual secondary macaque follicles, permits follicle growth, and supports steroidogenesis for ≤30 days in vitro. This study documents the first use of the alginate system to maintain primate tissue architecture, and findings suggest that encapsulated 3-D culture will be successful in supporting the in vitro development of human follicles.

Novel approach for the three-dimensional culture of granulosa cell-oocyte complexes.

The in vitro culture of immature ovarian follicles is used to examine the factors that regulate follicle development and may ultimately provide options for reproductive infertility. The objective of this study was to develop a three-dimensional in vitro culture system for the growth and development of individual granulosa cell-oocyte complexes. An alginate hydrogel was used to encapsulate immature mouse granulosa cell-oocyte complexes (GOCs) that were subsequently maintained in a serum-free in vitro culture. An overall incorporation efficiency of 50% was achieved. The complexes were assessed by transmission electron microscopy for changes in ultrastructure during in vitro growth. The architecture of the follicular complex was maintained during the encapsulation and the subsequent culture. The granulosa cells proliferated, and the oocytes also grew in volume and obtained the structural characteristics of mature oocytes including cortical granule formation, a well-developed zona pellucida with microvilli, normal mitochondria, and lattice-like structures in the cytoplasm. Oocytes retrieved and matured were able to resume meiosis, a necessary step for proper development. Thus, this system represents a new in vitro methodology for growth of individual granulosa cell-oocyte complexes.