Loredana De Bartolo

Evaluation of cell behaviour related to physico-chemical properties of polymeric membranes to be used in bioartificial organs.

In bioartificial organs using isolated cells, polymeric semipermeable membranes are used as immunoselective barriers as a means for cell oxygenation and also as substrata for adhesion of anchorage-dependent cells. The capacity of the membrane to perform its functions and to provide a cytocompatible support for cell culture depends in particular on its surface properties. In this study we investigated the physico-chemical aspects of the interaction between the membrane and mammalian cells in order to provide guidelines to the selection of cytocompatible membranes. We evaluated the adhesion and metabolic behaviour of isolated liver cells cultured on various polymeric membranes such as those modified by protein adsorption. The physico-chemical properties of the membranes were characterised by contact angle measurements. The different parameters such as acid (gamma+), base (gamma-) and Lifshitz-van der Waals (gammaLW) of the surface free energy were calculated according to Good-van Osss model. The adsorption of protein modified markedly both contact angle and components of membrane surface tension. In particular, base parameter of surface tension decreased drastically with increased water contact angle. For each investigated membrane we observed that cell adhesion increased with increasing base parameter of membrane surface tension. The absolute value of cell adhesion is higher in the presence of serum proteins adsorbed on the membrane surface, which change the wettability by increasing the base parameter of surface tension. Also, the metabolic functions improve on hydrophilic membranes. Liver cells synthesised urea with a rate that increased with increasing base parameter value of membrane surface tension. The metabolic activity is particularly expressed at high levels when cells were cultured on polycarbonate and cellulose acetate membranes.

Human hepatocyte functions in a crossed hollow fiber membrane bioreactor.

An important challenge in liver tissue engineering is the development of bioartificial systems that are able to favour the liver reconstruction and to modulate liver cell behaviour. A crossed hollow fiber membrane bioreactor was developed to support the long-term maintenance and differentiation of human hepatocytes. The bioreactor consists of two types of hollow fiber (HF) membranes with different molecular weight cut-off (MWCO) and physico-chemical properties cross-assembled in alternating manner: modified polyetheretherketone (PEEK-WC) and polyethersulfone (PES), used for the medium inflow and outflow, respectively. The combination of these two fiber set produces an extracapillary network for the adhesion of cells and a high mass exchange through the cross-flow of culture medium. The transport of liver specific products such as albumin and urea together with the transport of drug such as diazepam was modelled and compared with the experimental metabolic data. The theoretical metabolite concentration differed 7.5% for albumin and 5% for urea with respect to experimental data. The optimised perfusion conditions of the bioreactor allowed the maintenance of liver functions in terms of urea synthesis, albumin secretion and diazepam biotransformation up to 18 days of culture. In particular the good performance of the bioreactor was confirmed by the high rate of urea synthesis (28.7 microg/h 10(6) cells) and diazepam biotransformation. In the bioreactor human hepatocytes expressed at high levels the individual cytochrome P450 isoenzymes involved in the diazepam metabolism. The results demonstrated that crossed HF membrane bioreactor is able to support the maintenance of primary human hepatocytes preserving their liver specific functions for all investigated period. This device may be a potential tool in the liver tissue engineering for drug metabolism/toxicity testing and study of disease pathogenesis alternatively to animal experimentation.

Coupled transport of amino acids through a supported liquid membrane. I. Experimental optimization

Abstract Some experimental aspects on separation, concentration and purification of amino acids through supported liquid membranes, by using D - L -phenylalanine as a model, are described. The liquid-liquid extraction experiments, the influence on he mass-transport phenomena of various parameters (e.g. driving force, carrier concentration, diluent of the carrier, temperature) and the procedure for determining the stability of the supported liquid membranes are discussed. A significant influence of the temperature on phenylalanine (Phe) transport has been observed. It is shown that the SLM can work at 70°C without losing its transport ability for at least 150 hours without regeneration and that the value of the initial flux and the stability time depend on the carrier-diluent mixture chosen for the SLM. The experimental results have been analysed by using a model from the literature. The data obtained are consistent with that model.

High level benzodiazepine and ammonia clearance by flat membrane bioreactors with porcine liver cells.

The onset of hepatic encephalopathy is a multifactorial process in which endogenous benzodiazepines and hyperammonemia play a pivotal role. The treatment of comatose states in liver failure is one of the major functions of a bioartificial liver. A controlled study demonstrating the capacity of a large scale bioartificial liver to detoxify benzodiazepines could be a crucial prerequisite to break this circle of events leading to coma. The aim of this study was therefore to expose the bioreactor to high levels of benzodiazepines and ammonia for evaluation of its detoxifying capacity. We have developed a novel and unique device reconstructing the plate architecture of the liver. Porcine hepatocytes were co-cultured with non-parenchymal cells. We investigated benzodiazepine metabolism using diazepam as model drug. The bioreactor was also loaded with high levels of ammonia and ammonia clearance as well as urea secretion with ammonia challenge were investigated. Albumin secretion was analysed in parallel as a control viability and tissue specific secretory parameter. The results clearly show that the velocity of diazepam turnover increases between day 1 and 2 and stabilises at high levels. Typical diazepam metabolites including temazepam, N-desmethyl-diazepam and oxazepam were generated. Cell specific functions, including albumin secretion, were comparable to an in vivo liver. We conclude that the flat membrane bioreactor used as bioartificial liver has the potential to detoxify diazepam and ammonia at significant amounts. Maintenance of monoxygenase activities in vitro is one of the strongholds of the bioreactor concept presented in this study.

Improved functions of human hepatocytes on NH3 plasma-grafted PEEK-WC–PU membranes

PEEK-WC-PU membranes were modified with an NH(3) glow discharge process to graft N-containing functional groups at their surface in order to improve the maintenance of human hepatocytes. Native and modified membrane surfaces were characterized with XPS, ToF-SIMS and WCA measurements. We have investigated morphological behaviour and specific functions of primary human hepatocytes on native and modified PEEK-WC-PU membranes in a small-scale gas-permeable bioreactor. N-containing groups grafted at the surface of the membranes improved the initial steps of adhesion and the maintenance of phenotype and differentiated functions of cells. Confocal microscopy of cell morphology evidenced human hepatocytes exhibiting a polygonal shape and organizing a 3D structure. The presence of CK19 positive cells, a marker of biliary duct epithelium, was also found on native and modified membranes. Liver specific functions, investigated in terms of urea production, albumin synthesis and diazepam biotransformation, were maintained at high levels up to 19 days, particularly on surface-modified membranes.

Human hepatocytes and endothelial cells in organotypic membrane systems

The realization of organotypic liver model that exhibits stable phenotype is a major challenge in the field of liver tissue engineering. In this study we developed liver organotypic co-culture systems by using synthetic and biodegradable membranes with primary human hepatocytes and human umbilical vein endothelial cells (HUVEC). Synthetic membranes prepared by a polymeric blend constituted of modified polyetheretherketone (PEEK-WC) and polyurethane (PU) and biodegradable chitosan membranes were developed by phase inversion technique and used in homotypic and organotypic culture systems. The morphological and functional characteristics of cells in the organotypic co-culture membrane systems were evaluated in comparison with homotypic cultures and traditional systems. Hepatocytes in the organotypic co-culture systems exhibit compact polyhedral cells with round nuclei and well demarcated cell-cell borders like in vivo, as a result of heterotypic interaction with HUVECs. In addition HUVECs formed tube-like structures directly through the interactions with the membranes and hepatocytes and indirectly through the secretion of ECM proteins which secretion improved in the organotypic co-culture membrane systems. The heterotypic cell-cell contacts have beneficial effect on the hepatocyte albumin production, urea synthesis and drug biotransformation. The developed organotypic co-culture membrane systems elicit liver specific functions in vitro and could be applied for the realization of engineered liver tissues to be used in tissue engineering, drug metabolism studies and bioartificial liver devices.

Influence of micro-patterned PLLA membranes on outgrowth and orientation of hippocampal neurites

In neuronal tissue engineering many efforts are focused on creating biomaterials with physical and chemical pathways for controlling cellular proliferation and orientation. Neurons have the ability to respond to topographical features in their microenvironment causing among others, axons to proliferate along surface features such as substrate grooves in micro-and nanoscales. As a consequence these neuronal elements are able to correctly adhere, migrate and orient within their new environment during growth. Here we explored the polarization and orientation of hippocampal neuronal cells on nonpatterned and micro-patterned biodegradable poly(l-lactic acid) (PLLA) membranes with highly selective permeable properties. Dense and porous nonpatterned and micro-patterned membranes were prepared from PLLA by Phase Separation Micromolding. The micro-patterned membranes have a three-dimensional structure consisting of channels and ridges and of bricks of different widths. Nonpatterned and patterned membranes were used for hippocampal neuronal cultures isolated from postnatal days 1-3 hamsters and the neurite length, orientation and specific functions of cells were investigated up to 12 days of culture. Neurite outgrowth, length plus orientation tightly overlapped the pattern of the membrane surface. Cell distribution occurred only in correspondence to membrane grooves characterized by continuous channels whereas on membranes with interconnected channels, cells not only adhered to and elongated their cellular processes in the grooves but also in the breaking points. High orientation degrees of cells were determined particularly on the patterned porous membranes with channel width of 20 mum and ridges of 17 mum whereas on dense nonpatterned membranes as well as on polystyrene culture dish (PSCD) controls, a larger number of primary developed neurites were distributed. Based on these results, PLLA patterned membranes may directly improve the guidance of neurite extension and thereby enhancing their orientation with a consequently highly ordered neuronal cell matrix, which may have strong bearings on the elucidation of regeneration mechanisms.

Improving the bioactivity of Zn(II)-curcumin based complexes

New Zn(II)-curcumin based heteroleptic complexes (1-5) have been synthesized and fully characterized, with the aim to improve the bioactivity of the precursor derivative [(bpy-9)Zn(curc)Cl] (A), a potentially intercalating antitumor agent recently reported. Some structural changes have been made starting from the reference complex A, in order to introduce new functionalities, such as electrostatic and/or covalent interactions. In particular, keeping the same N,N chelating ligand, namely bpy-9, two completely different Zn(II) species have been obtained: a tetracoordinated Zn(II) cation with tetrafluoroborate as counterion (1) and a dimeric neutral complex in which the sulfate anion acts as a bridging group through two Zn(II) centres (2). Moreover, by changing the N,N chelating unit, [(L(n))Zn(curc)Cl] complexes (3-5), in which the Zn(II) ion shows the same pentacoordination seen in the precursor complex A, have been obtained. The antitumour activity of all new Zn(II) complexes was tested in vitro against the human neuroblastoma cell line SH-SY5Y in a biohybrid membrane system and the results indicate that all species exhibit strong cytotoxic activity. In particular the ionic tetrafluoroborate Zn(II) complex, 1, and the neutral phenanthroline based Zn(II) derivative, 4, show the strongest growth inhibition, being even more effective than the model complex A. Both complexes have a dose-dependent anti-proliferative effect on cells as demonstrated by the decrease of viability and the increase of Annexin V and PI-positive cells with the increase of their concentration. Cells treated with complexes 1 and 4 undergo apoptosis that involves the activation of JNK, caspase 3 and MMP changes. Finally, complex 1 is more effective in the induction of caspase-3 activation demonstrating its ability to trigger the execution-phase of cell apoptosis.

Oxygen mass transfer in a human tissue-engineered trachea.

On June 2008, the first human tissue-engineered trachea replacement was performed using decellularized (de-antigenised) cadaveric donor trachea, seeded with recipient epithelial cells on the internal surface of the graft and mesenchymal stem-cell-derived chondrocytes on the external. During the follow-up, cytological analysis at 4 postoperative days showed a migration of the stem-cells derived chondrocytes from the outer to the inner surface of the first 2 cm of the graft length. With the aim to rationalize these clinical findings, and under the hypothesis that cellular migration is driven by the oxygen gradients developing from the external part of the construct (exposed to O(2) deficiency) towards the better oxygenated epithelial region, an accurate computational model of oxygen transport in the trachea engineered construct was developed and solved using finite element method (FEM). Results confirm that critical limitation to oxygen transport prevalently occurs from proximal to middle section, within the first 2.8 cm of longitudinal length, in good agreement with experimental observation. In the proximal section, recognized as the most critical part of the engineered construct, the severe O(2) mass transfer limitation causes a drastic reduction of the diffusive flux within a distance of 650 microm. At cell density of 1 x 10(7)cells/cm(3), the 30% c.a of the total section area is under oxygen deficiency (O(2) partial pressure below the critical threshold of 38 mmHg). Along the whole tracheal construct, the Thiele modulus ranges within 2.3 and 3.7 in the external chondrocyte compartment, confirming thus the importance of the mass transfer limitation to oxygen diffusion rate. In general, the efficiency of the O(2) transport reduces considerably in the region close to proximal section.

Osteogenic and osteoclastogenic differentiation of co-cultured cells in polylactic acid–nanohydroxyapatite fiber scaffolds

The design of bone substitutes involves the creation of a microenvironment supporting molecular cross-talk between cells and scaffolds during tissue formation and remodelling. Bone remodelling process includes the cooperation of bone-building cells and bone-resorbing cells. In this paper we developed polylactic acid (PLA) and composite PLA-nanohydroxyapatite (nHA) scaffolds with 20 and 50wt.% of nHA by electrospinning technique to be used in bone tissue engineering. The developed scaffolds have different fiber diameter, porosity with interconnected pores and mechanical properties. Taking cues from the bone environment features we investigated the differentiation of human mesenchymal stem cells (hMSCs) from bone marrow in osteoblasts and the osteoclastogenesis in the developed scaffolds in homotypic and in co-culture up to 46 days. PLA and composite PLA-nHA scaffolds induced osteogenic and osteoclastogenic differentiation. Both osteoblasts and osteoclasts displayed high expression of specific markers (osteopontin, osteocalcin, RANK, RANKL) and functions such as secretion of ALP, cathepsin K and TRAP activity on composite scaffolds especially on PLA-nHA containing 20wt.% of nHA. The heterotypic interactions between osteoblasts and osteoclasts co-cultured in the developed scaffolds triggered their functional differentiation and activation.