Loredana Manfra

The European technical report on aquatic effect-based monitoring tools under the water framework directive

The Water Framework Directive (WFD), 2000/60/EC, requires an integrated approach to the monitoring and assessment of the quality of surface water bodies. The chemical status assessment is based on compliance with legally binding Environmental Quality Standards (EQSs) for selected chemical pollutants (priority substances) of EU-wide concern. In the context of the mandate for the period 2010 to 2012 of the subgroup Chemical Monitoring and Emerging Pollutants (CMEP) under the Common Implementation Strategy (CIS) for the WFD, a specific task was established for the elaboration of a technical report on aquatic effect-based monitoring tools. The activity was chaired by Sweden and co-chaired by Italy and progressively involved several Member States and stakeholders in an EU-wide drafting group. The main aim of this technical report was to identify potential effect-based tools (e.g. biomarkers and bioassays) that could be used in the context of the different monitoring programmes (surveillance, operational and investigative) linking chemical and ecological status assessment. The present paper summarizes the major technical contents and findings of the report.

Toxicity evaluation of diethylene glycol and its combined effects with produced waters of off-shore gas platforms in the Adriatic Sea (Italy): bioassays with marine/estuarine species.

Diethylene glycol (DEG) is commonly used to dehydrate natural gas in off-shore extraction plants and to prevent formation of gas hydrates. It may be released into the sea accidentally or in discharged produced waters (PWs). PWs samples from off-shore gas platforms in the Adriatic Sea (Italy) have been used in this study. The objectives of the study were: a) to evaluate the toxicity of DEG for marine organisms; b) to evaluate if a high DEG content in PWs may alter their toxicity; c) to verify whether the DEG threshold concentration established by the Italian legislation (3.5 g/l) for PWs discharged at sea is safe for marine environment. Ten different species (Vibrio fischeri, Phaeodactylum tricornutum, Dunaliella tertiolecta, Brachionus plicatilis, Artemia franciscana, Tigropus fulvus, Mytilus galloprovincialis, Crassostrea gigas, Tapes philippinarum and Dicentrarchus labrax) have been exposed to DEG; four of these species were also exposed to PWs in combination with DEG. The results showed that: a) DEG is not toxic at levels normally detected in Adriatic PWs; b) DEG in combination with PW showed mainly additive or synergistic effects; c) short-term bioassays showed that the DEG limit of 3.5 g/l could be acceptable.

Long-term lethal toxicity test with the crustacean Artemia franciscana.

Our research activities target the use of biological methods for the evaluation of environmental quality, with particular reference to saltwater/brackish water and sediment. The choice of biological indicators must be based on reliable scientific knowledge and, possibly, on the availability of standardized procedures. In this article, we present a standardized protocol that used the marine crustacean Artemia to evaluate the toxicity of chemicals and/or of marine environmental matrices. Scientists propose that the brine shrimp (Artemia) is a suitable candidate for the development of a standard bioassay for worldwide utilization. A number of papers have been published on the toxic effects of various chemicals and toxicants on brine shrimp (Artemia). The major advantage of this crustacean for toxicity studies is the overall availability of the dry cysts; these can be immediately used in testing and difficult cultivation is not demanded. . Cyst-based toxicity assays are cheap, continuously available, simple and reliable and are thus an important answer to routine needs of toxicity screening, for industrial monitoring requirements or for regulatory purposes. The proposed method involves the mortality as an endpoint. The numbers of survivors were counted and percentage of deaths were calculated. Larvae were considered dead if they did not exhibit any internal or external movement during several seconds of observation. This procedure was standardized testing a reference substance (Sodium Dodecyl Sulfate); some results are reported in this work. This article accompanies a video that describes the performance of procedural toxicity testing, showing all the steps related to the protocol.

Lethal and sublethal endpoints observed for Artemia exposed to two reference toxicants and an ecotoxicological concern organic compound.

Swimming speed alteration and mortality assays with the marine crustacean Artemia franciscana were carried out. EC50 and LC50 values after 24-48h exposures were calculated for two reference toxicants, copper sulphate pentahydrate (CuSO4·5H2O) and Sodium Dodecyl Sulphate (SDS), and an ecotoxicological concern organic compound, Diethylene Glycol (DEG). Different end-points have been evaluated, in order to point out their sensitivity levels. The swimming speed alteration (SSA) was compared to mortality values and also to the hatching rate inhibition (literature data). SSA resulted to be more sensitive than the mortality and with a sensitivity comparable to (or even higher than) the hatching rate endpoint.

Insights into the CuO nanoparticle ecotoxicity with suitable marine model species

Metal oxide nanoparticles, among them copper oxide nanoparticles (CuO NPs), are widely used in different applications (e.g. batteries, gas sensors, superconductors, plastics and metallic coatings), increasing their potential release in the environment. In aquatic matrix, the behavior of CuO NPs may strongly change, depending on their surface charge and some physical-chemical characteristics of the medium (e.g. ionic strength, salinity, pH and natural organic matter content). Ecotoxicity of CuO NPs to aquatic organisms was mainly studied on freshwater species, few tests being performed on marine biota. The aim of this study was to assess the toxicity of CuO NPs on suitable indicator species, belonging to the ecologically relevant level of consumers. The selected bioassays use reference protocols to identify Effect/Lethal Concentrations (E(L)C), by assessing lethal and sub-lethal endpoints. Mortality tests were performed on rotifer (Brachionus plicatilis), shrimp (Artemia franciscana) and copepod (Tigriopus fulvus). While moult release failure and fertilization rate were studied, as sub-lethal endpoints, on T. fulvus and sea urchin (Paracentrotus lividus), respectively. The size distribution and sedimentation rates of CuO NPs, together with the copper dissolution, were also analyzed in the exposure media. The CuO NP ecotoxicity assessment showed a concentration-dependent response for all species, indicating similar mortality for B. plicatilis (48hLC50 = 16.94 ± 2.68mg/l) and T. fulvus (96hLC50 = 12.35 ± 0.48mg/l), followed by A. franciscana (48hLC50 = 64.55 ± 3.54mg/l). Comparable EC50 values were also obtained for the sub-lethal endpoints in P. lividus (EC50 = 2.28 ± 0.06mg/l) and T. fulvus (EC50 = 2.38 ± 0.20mg/l). Copper salts showed higher toxicity than CuO NPs for all species, with common sensitivity trend as follows: P. lividus ≥ T. fulvus (sublethal endpoint) ≥ B. plicatilis >T. fulvus (lethal endpoint) >A. franciscana. CuO NP micrometric aggregates and high sedimentation rates were observed in the exposure media, with different particle size distributions depending on the medium. The copper dissolution was about 0.16% of the initial concentration, comparable to literature values. The integrated ecotoxicological-physicochemical approach was used to better describe CuO NP toxicity and behavior. In particular, the successful application of ecotoxicological reference protocols allowed to produce reliable L(E)C data useful to identify thresholds and assess potential environmental hazard due to NPs.

A comparative toxicity study between an autochthonous Artemia and a non native invasive species

Acute heavy metal toxicity was compared in nauplii of an autochthonous Artemia parthenogenetica (Branchiopoda, Anostraca) from Saline di Cervia (Ravenna, Italy) and of a non native commercially available A. franciscana. No significant difference in sensitivity was detected between two species.

Comparative ecotoxicity of polystyrene nanoparticles in natural seawater and reconstituted seawater using the rotifer Brachionus plicatilis

The impact of nanoplastics using model polystyrene nanoparticles (PS NPs), anionic (PS-COOH) and cationic (PS-NH2), has been investigated on the marine rotifer Brachionus plicatilis, a major component of marine zooplanktonic species. The role of different surface charges in affecting PS NP behaviour and toxicity has been considered in high ionic strength media. To this aim, the selected media were standardized reconstituted seawater (RSW) and natural sea water (NSW), the latter resembling more natural exposure scenarios. Hatched rotifer larvae were exposed for 24h and 48h to both PS NPs in the range of 0.5-50μg/ml using PS NP suspensions made in RSW and NSW. No effects on lethality upon exposure to anionic NPs were observed despite a clear gut retention was evident in all exposed rotifers. On the contrary, cationic NPs caused lethality to rotifer larvae but LC50 values resulted lower in rotifers exposed in RSW (LC50=2.75±0.67µg/ml) compared to those exposed in NSW (LC50=6.62±0.87µg/ml). PS NPs showed similar pattern of aggregation in both high ionic strength media (RSW and NSW) but while anionic NPs resulted in large microscale aggregates (Z-average 1109 ± 128nm and 998±67nm respectively), cationic NP aggregates were still in nano-size forms (93.99 ± 11.22nm and 108.3 ± 12.79nm). Both PDI and Z-potential of PS NPs slightly differed in the two media suggesting a role of their different surface charges in affecting their behaviour and stability. Our findings confirm the role of surface charges in nanoplastic behaviour in salt water media and provide a first evidence of a different toxicity in rotifers using artificial media (RSW) compared to natural one (NSW). Such evidence poses the question on how to select the best medium in standardized ecotoxicity assays in order to properly assess their hazard to marine life in natural environmental scenarios.

Salinity-Based Toxicity of CuO Nanoparticles, CuO-Bulk and Cu Ion to Vibrio anguillarum

Bacteria are used in ecotoxicology for their important role in marine ecosystems and their quick, reproducible responses. Here we applied a recently proposed method to assess the ecotoxicity of nanomaterials on the ubiquitous marine bacterium Vibrio anguillarum, as representative of brackish and marine ecosystems. The test allows the determination of 6-h EC50 in a wide range of salinity, by assessing the reduction of bacteria actively replicating and forming colonies. The toxicity of copper oxide nanoparticles (CuO NPs) at different salinities (5-20-35 ‰) was evaluated. CuSO4 5H2O and CuO bulk were used as reference toxicants (solubility and size control, respectively). Aggregation and stability of CuO NP in final testing dispersions were characterized; Cu2+ dissolution and the physical interactions between Vibrio and CuO NPs were also investigated. All the chemical forms of copper showed a clear dose-response relationship, although their toxicity was different. The order of decreasing toxicity was: CuSO4 5H2O > CuO NP > CuO bulk. As expected, the size of CuO NP aggregates increased with salinity and, concurrently, their toxicity decreased. Results confirmed the intrinsic toxicity of CuO NPs, showing modest Cu2+ dissolution and no evidence of CuO NP internalization or induction of bacterial morphological alterations. This study showed the V. anguillarum bioassay as an effective tool for the risk assessment of nanomaterials in marine and brackish environments.

Monitoring of Impacts of Offshore Platforms in the Adriatic Sea (Italy)

The oil and gas industry is truly global, with operations conducted in every corner of the world, since the worldwide increasing of energy demand has strongly raised the exploitation of non-renewable resources. The date of birth of the offshore industry is commonly regarded as 1947, when it was successfully completed by Kerr-McGee the first well in the Gulf of Mexico (Chakrabarti et al., 2005). Since 1950 about 7,000 platforms have been constructed and installed around the world, and today most of these structures, which represent more than 65% of the total, are located along the American coast of the Gulf of Mexico, the remainder is concentrated in the North Sea, Middle East, Africa, Australia, Asia and South America (Wilson III and Heath, 2008). Approximately 0.4% of world reserves of oil and gas are located in the Mediterranean basin (Pinder, 2001) and therefore this area represents one of the areas that will have greater expansion in offshore activities in the coming years (Maksound, 2004). In sixty years, Italy has produced 75% of the gas discovered. The natural gas production in 2010 was 8 billion cubic meters. The oil and gas production wells in the entire Italian territory are on the whole 1200 and the platforms at sea are 127, which extract especially gas (Paini, 2001; Assomineraria, 2004; 2011). These offshore structures are mainly distributed along the Northern and Central Adriatic coasts (about 90 platforms (De Biasi et al., 2006; Maggi et al., 2007), on depths between 10 and 120 meters, but also in the Ionian Sea and in the Strait of Sicily (www.eni.it).

Cytotoxicity and genotoxicity of CuO nanoparticles in sea urchin spermatozoa through oxidative stress

Copper oxide nanoparticles (CuO NPs) are extensively used in various industrial and commercial applications. Despite their wide application may lead to the contamination of marine ecosystem, their potential environmental effects remain to be determined. Toxicity assessment studies have primarily focused on investigating the effects of CuO NPs on fertilization success and embryo development of different sea urchin species while the impact on sperm quality have never been assessed. In this line, this study aims to assess the effects of CuO NPs on the spermatozoa of the sea urchin Paracentrotus lividus. After sperm exposure to CuO NPs, biomarkers of sperm viability, cytotoxicity, oxidative stress, and genotoxicity as well as morphology were evaluated. Results showed that CuO NPs exposure decreased sperm viability, impaired mitochondrial activity and increased the production of reactive oxygen species (ROS) and lipid peroxidation. Furthermore, CuO NPs exposure caused DNA damage and morphological alterations. Together with the antioxidant rescue experiments, these results suggest that oxidative stress is the main driver of CuO NP spermiotoxic effects. The mechanism of toxicity is here proposed: the spontaneous generation of ROS induced by CuO NPs and the disruption of the mitochondrial respiratory chain lead to production of ROS that, in turn, induce lipid peroxidation and DNA damage, and result in defective spermatozoa up to induce sperm cytotoxicity. Investigating the effects of CuO NPs on sea urchin spermatozoa, this study provides valuable insights into the mechanism of reproductive toxicity induced by CuO NPs.