Louis Paul Inzinna

A multi-source inverse-geometry CT system: initial results with an 8 spot x-ray source array

We present initial experimental results of a rotating-gantry multi-source inverse-geometry CT (MS-IGCT) system. The MS-IGCT system was built with a single module of 2 × 4 x-ray sources and a 2D detector array. It produced a 75 mm in-plane field-of-view (FOV) with 160 mm axial coverage in a single gantry rotation. To evaluate system performance, a 2.5 inch diameter uniform PMMA cylinder phantom, a 200 µm diameter tungsten wire, and a euthanized rat were scanned. Each scan acquired 125 views per source and the gantry rotation time was 1 s per revolution. Geometric calibration was performed using a bead phantom. The scanning parameters were 80 kVp, 125 mA, and 5.4 µs pulse per source location per view. A data normalization technique was applied to the acquired projection data, and beam hardening and spectral nonlinearities of each detector channel were corrected. For image reconstruction, the projection data of each source row were rebinned into a full cone beam data set, and the FDK algorithm was used. The reconstructed volumes from upper and lower source rows shared an overlap volume which was combined in image space. The images of the uniform PMMA cylinder phantom showed good uniformity and no apparent artifacts. The measured in-plane MTF showed 13 lp cm(-1) at 10% cutoff, in good agreement with expectations. The rat data were also reconstructed reliably. The initial experimental results from this rotating-gantry MS-IGCT system demonstrated its ability to image a complex anatomical object without any significant image artifacts and to achieve high image resolution and large axial coverage in a single gantry rotation.

Multisource inverse-geometry CT — Prototype system integration

Todays 3rd generation CT scanners have one or two X-ray tubes, with one focal spot or “source” per vacuum chamber or “tube”. Our first multi-source inverse geometry CT prototype has eight X-ray sources. We have demonstrated multisource imaging with an 8-spot X-ray tube on a stationary gantry and a rotating phantom. We present an update on the development of the gantry-based multi-source CT scanner: we combine the multi-source X-ray tube and gantry rotation producing the first multi-source gantry-based CT scanner prototype. Currently the system is in the process of being upgraded to 32 X-ray sources to provide a larger field-of-view and to demonstrate the concept of virtual bowtie.

Initial results with a multisource inverse-geometry CT system

The multi-source inverse-geometry CT(MS-IGCT) system is composed of multiple sources and a small 2D detector array. An experimental MS-IGCT system was built and we report initial results with 2×4 x-ray sources, a 75 mm inplane field-of-view (FOV) and 160 mm z-coverage in a single gantry rotation. To evaluate the system performance, experimental data were acquired from several phantoms and a post-mortem rat. Before image reconstruction, geometric calibration, data normalization, beam hardening correction and detector spectral calibration were performed. For reconstruction, the projection data were rebinned into two full cone beam data sets, and the FDK algorithm was used. The reconstructed volumes from the upper and lower source rows shared an overlap volume which was combined in image space. The reconstructed images of the uniform cylinder phantom showed good uniformity of the reconstructed values without any artifacts. The rat data were also reconstructed reliably. The initial experimental results from this rotating-gantry MS-IGCT system demonstrated its ability to image a complex anatomical object without any significant image artifacts and to ultimately achieve large volumetric coverage in a single gantry rotation.

Design and characterization of electron beam focusing for X-ray generation in novel medical imaging architecture.

A novel electron beam focusing scheme for medical X-ray sources is described in this paper. Most vacuum based medical X-ray sources today employ a tungsten filament operated in temperature limited regime, with electrostatic focusing tabs for limited range beam optics. This paper presents the electron beam optics designed for the first distributed X-ray source in the world for Computed Tomography (CT) applications. This distributed source includes 32 electron beamlets in a common vacuum chamber, with 32 circular dispenser cathodes operated in space charge limited regime, where the initial circular beam is transformed into an elliptical beam before being collected at the anode. The electron beam optics designed and validated here are at the heart of the first Inverse Geometry CT system, with potential benefits in terms of improved image quality and dramatic X-ray dose reduction for the patient.

Electron backscatter in X-ray tubes: experiment and analysis

X-ray medical imaging techniques use 80-140 kV X-ray tubes running at increasingly high power levels (52 kW instantaneous) to generate high quality images with low exposure times. X-rays are generated at <1% efficiency in the anode, with the balance of the input power converted to heat. In addition to radiative and conduction heat transport, it is necessary to explicitly consider electron backscatter (EBS) as an independent heat transfer mechanism for design of the highest power X-ray tubes. Here we discuss EBS physics and X-ray tube aspects, describe experimental measurement of spatially resolved EBS current in a high power demountable X-ray tube system and obtain a good comparison with numerical analysis of EBS current distribution.