Louis Renaud

Fast prototyping using a dry film photoresist : microfabrication of soft-lithography masters for microfluidic structures

Etertec HQ-6100 dry film photoresist was used in this work to fabricate soft-lithography masters applied to microfluidic applications. We demonstrated that the use of this photoresist was a convenient alternative to conventional microfabrication approaches based on DRIE and liquid photoresists for fast-prototyping of microfluidic structures. Our method was at least two times faster than conventional processes and required limited investment for equipments. Finally, this approach was applied to the design and fabrication of microfluidic networks used for gradient generation in bulk solution.

In-capillary derivatization and capillary electrophoresis separation of amino acid neurotransmitters from brain microdialysis samples

A new in-capillary derivatization method with naphtalene-2,3-dicarboxyaldehyde (NDA)/CN(-) has been developed for capillary electrophoresis with laser-induced fluorescence detection of brain microdialysate amino acids. Samples are sandwiched between two plugs of reagent mixture at the capillary inlet and subsequently separated. Highest derivatization yields are obtained by using a reagent to sample plug length ratio equal to 4, performing a first electrophoretic mixing followed by a zero potential amplification step before applying the separation voltage and using a NaCN to NDA concentration ratio equal to 1. This new single-step methodology allows the analysis of amino acid neurotransmitters in rat brain microdialysis samples.

Electrochemical boron-doped diamond film microcells micromachined with femtosecond laser: application to the determination of water framework directive metals.

Planar electrochemical microcells were micromachined in a microcrystalline boron-doped diamond (BDD) thin layer using a femtosecond laser. The electrochemical performances of the new laser-machined BDD microcell were assessed by differential pulse anodic stripping voltammetry (DPASV) determinations, at the nanomolar level, of the four heavy metal ions of the European Water Framework Directive (WFD): Cd(II), Ni(II), Pb(II), Hg(II). The results are compared with those of previously published BDD electrodes. The calculated detection limits are 0.4, 6.8, 5.5, and 2.3 nM, and the linearities go up to 35, 97, 48, and 5 nM for, respectively, Cd(II), Ni(II) Pb(II), and Hg(II). The detection limits meet with the environmental quality standard of the WFD for three of the four metals. It was shown that the four heavy metals could be detected simultaneously in the concentration ratio usually measured in sewage or runoff waters.

Electrophoresis PDMS/glass chips with continuous on-chip derivatization and analysis of amino acids using naphthalene-2,3-dicarboxaldehyde as fluorogenic agent.

In this work, we developed a PDMS electrophoresis device able to carry out on-chip derivatization and quantification of amino acids (AAs) using naphthalene-2,3-dicarboxaldehyde (NDA) as a fluorogenic agent. A chemical modification of the PDMS surface was found compulsory to achieve the derivatization of AAs with NDA and a limit of detection (LOD) of 40nM was reached for glycine. Finally, we suggested the applicability of this microdevice for the analysis of real biological samples such as a rat hippocampus microdialysate.

Electrokinetic Biomolecule Preconcentration Using Xurography-Based Micro-Nano-Micro Fluidic Devices

In this paper we introduce a low cost rapid prototyping framework for designing Micro-Nano-Micro (MNM) fluidic preconcentration device based on ion concentration polarization (ICP) phenomenon. Xurography-based microchannels are separated by a strip of ion perm-selective Nafion membrane which plays the role of nanofluidic potential barrier for the negatively charged molecules. As a result, by using this rapid and inexpensive fabrication technique, it is possible to get preconcentration plugs as high as 5000 fold with an original symmetric electroosmotic flow (EOF) condition. Due to its simplicity and performance, this device could be implemented in various bioanalysis systems.

All-organic electrostrictive polymer composites with low driving electrical voltages for micro-fluidic pump applications

This paper focuses on the improvement of a relaxor ferroelectric terpolymer, i.e., poly (vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) [P(VDF-TrFE-CFE)], filled with a bis(2-ethylhexyl) phthalate (DEHP). The developed material gave rise to a significantly increased longitudinal electrostrictive strain, as well as an increased mechanical energy density under a relatively low electric field. These features were attributed to the considerably enhanced dielectric permittivity and a decreased Young modulus as a result of the introduction of only small DEHP plasticizer molecules. In addition, the plasticizer-filled terpolymer only exhibited a slight decrease of the dielectric breakdown strength, which was a great advantage with respect to the traditional polymer-based electrostrictive composites. More importantly, the approach proposed herein is promising for the future development and scale-up of new high-performance electrostrictive dielectrics under low applied electrical fields through modification simply by blending with a low-cost plasticizer. An experimental demonstration based on a flexible micro-fluidic application is described at the end of this paper, confirming the attractive characteristics of the proposed materials as well as the feasibility of integrating them as micro-actuators in small-scale devices.

Electrically addressable deposition of diazonium-functionalized antibodies on boron-doped diamond microcells for the detection of ochratoxin A

This work reports the manufacturing procedure for an impedimetric immunosensor for sensitive detection of the mycotoxin, ochratoxin A (OTA), through electroaddressing of diazonium functionalized antibodies on the working electrode of a planar Boron Doped Diamond (BDD) electrochemical microcell. The immunosensor elaboration and the immunochemical reaction between ochratoxin A and the surface-bound antibody were monitored using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The impedance variation due to the specific antibody–OTA interaction was correlated with the OTA concentration in the samples. The increase in electron-transfer resistance values presents a sigmoidal shape versus log concentration of OTA, with a dynamic range between 7 pg mL−1 and 25 ng mL−1. A limit of detection (LOD) of 7 pg mL−1 and a IC50 of 1.2 ng mL−1 were obtained. The immunosensor thus fabricated exhibited high sensitivity, good reproducibility, long-term stability, and was used for the detection of OTA in real coffee samples with a good recovery rate. The reported validated manufacturing procedure is compatible with the production of microarrays for multidetection.

Toward the Rational Design of Galactosylated Glycoclusters That Target Pseudomonas aeruginosa Lectin A (LecA): Influence of Linker Arms That Lead to Low-Nanomolar Multivalent Ligands.

Anti-infectious strategies against pathogen infections can be achieved through antiadhesive strategies by using multivalent ligands of bacterial virulence factors. LecA and LecB are lectins of Pseudomonas aeruginosa implicated in biofilm formation. A series of 27 LecA-targeting glycoclusters have been synthesized. Nine aromatic galactose aglycons were investigated with three different linker arms that connect the central mannopyranoside core. A low-nanomolar (Kd =19 nm, microarray) ligand with a tyrosine-based linker arm could be identified in a structure-activity relationship study. Molecular modeling of the glycoclusters bound to the lectin tetramer was also used to rationalize the binding properties observed.

Electrophoresis Poly(Dimethylsiloxane)/Glass Chips with Integrated Active Cooling for Quantification of Amino Acids

Abstract The objective of this work was to develop and characterize a poly(dimethylsiloxane) device with an integrated active cooling function able to carry out capillary electrophoresis separations. Polymer-based microdevices are indispensable to recent advances in biomedical analysis. In particular, they have been applied to many microfluidic platforms owing to their low cost, ease of fabrication, and versatility in preparing complex microstructures. However, when applied to capillary electrophoresis separations, polymer microfluidic structures present an inherent disadvantage compared to glass and Si structures; they have a lower thermal conductivity than glass and Si. Although miniaturized devices allow operation at high electric fields, they face separation efficiency limitations due to Joule heating. There is, therefore, a strong need of developing capillary electrophoresis microfluidic structures with active cooling in order to operate at a higher electric field and potentially increase separation efficiency in these microdevices. A poly(dimethylsiloxane)/glass hybrid microfluidic capillary electrophoresis system is presented, where Joule heating was minimized by using an integrated active cooling function. Two poly(dimethylsiloxane) slabs with embedded microfluidic structures were irreversibly sealed on both sides of a thin glass slide. The top poly(dimethylsiloxane) slab was used to carry out capillary electrophoresis separations, whereas the bottom poly(dimethylsiloxane) slab was employed to cool down the buffer solution used during the capillary electrophoresis separation. As demonstrated on current versus voltage plots and on capillary electrophoresis electropherograms, capillary electrophoresis separation was able to be operated at a higher electric field when using the cooling function. The cooling rate was adjustable by varying the flow rate and the initial temperature of the liquid flowing in the cooling microfluidic structure.

Xurography-based microfluidic algal biosensor and dedicated portable measurement station for online monitoring of urban polluted samples

A critical need exists to develop rapid, in situ, and real-time tools to monitor the impact of pollution discharge toxicity on aquatic ecosystems. The present paper deals with the development of a novel, simple-to-use, low-cost, portable, and user-friendly algal biosensor. In this study, a complete and autonomous portable fluorimeter was developed to assess the A-chlorophyll fluorescence of microalgae, inserted by capillarity into low-cost and disposable xurography-based microfluidic chips. Three microalgae populations were used to develop the biosensor: Chlorella vulgaris, Pseudokirchneriella subcapitata, and Chlamydomonas reinhardtii. Biosensor feasibility and sensitivity parameters, such as algal concentration and light intensity, were optimized beforehand to calibrate the biosensor sensitivity with Diuron, a pesticide known to be very toxic for microalgae. Finally, the biosensor was employed in 10 aqueous urban polluted samples (7 urban wet-weather discharges and 3 wastewater) in order to prove its reliability, reproducibility, and performance in the detection of toxic discharges in the field.