Lucia Moreira Campos Paiva

Immobilization of Yarrowia lipolytica Lipase—a Comparison of Stability of Physical Adsorption and Covalent Attachment Techniques

Lipase immobilization offers unique advantages in terms of better process control, enhanced stability, predictable decay rates and improved economics. This work evaluated the immobilization of a highly active Yarrowia lipolytica lipase (YLL) by physical adsorption and covalent attachment. The enzyme was adsorbed on octyl–agarose and octadecyl–sepabeads supports by hydrophobic adsorption at low ionic strength and on MANAE–agarose support by ionic adsorption. CNBr–agarose was used as support for the covalent attachment immobilization. Immobilization yields of 71, 90 and 97% were obtained when Y. lipolytica lipase was immobilized into octyl–agarose, octadecyl–sepabeads and MANAE–agarose, respectively. However, the activity retention was lower (34% for octyl–agarose, 50% for octadecyl–sepabeads and 61% for MANAE–agarose), indicating that the immobilized lipase lost activity during immobilization procedures. Furthermore, immobilization by covalent attachment led to complete enzyme inactivation. Thermal deactivation was studied at a temperature range from 25 to 45°C and pH varying from 5.0 to 9.0 and revealed that the hydrophobic adsorption on octadecyl–sepabeads produced an appreciable stabilization of the biocatalyst. The octadecyl–sepabeads biocatalyst was almost tenfold more stable than free lipase, and its thermal deactivation profile was also modified. On the other hand, the Y. lipolytica lipase immobilized on octyl–agarose and MANAE–agarose supports presented low stability, even less than the free enzyme.

Separation and Immobilization of Lipase from Penicillium simplicissimum by Selective Adsorption on Hydrophobic Supports

Lipases are an enzyme class of a great importance as biocatalysts applied to organic chemistry. However, it is still necessary to search for new enzymes with special characteristics such as good stability towards high temperatures, organic solvents, and high stereoselectivity presence. The present work’s aim was to immobilize the lipases pool produced by Penicillium simplissicimum, a filamentous fungi strain isolated from Brazilian babassu cake residue. P. simplissicimum lipases were separated into three different fractions using selective adsorption method on different hydrophobic supports (butyl-, phenyl-, and octyl-agarose) at low ionic strength. After immobilization, it was observed that these fractions’ hyperactivation is in the range of 131% to 1133%. This phenomenon probably occurs due to enzyme open form stabilization when immobilized onto hydrophobic supports. Those fractions showed different thermal stability, specificity, and enantioselectivity towards some substrates. Enantiomeric ratio for the hydrolysis of (R,S) 2-O-butyryl-2-phenylacetic acid ranged from 1 to 7.9 for different immobilized P. simplissicimum lipase fractions. Asymmetry factor for diethyl 2-phenylmalonate hydrolysis ranged from 11.8 to 16.4 according to the immobilized P. simplissicimum lipase fractions. Those results showed that sequential adsorption methodology was an efficient strategy to obtain new biocatalysts with different enantioselectivity degrees, thermostability, and specificity prepared with a crude extract produced by a simple and low-cost technology.

Three different coupled enzymatic systems for in situ regeneration of NADPH

Three different coupled enzymatic systems used in the reduction of sulcatone by alcohol dehydrogenase from Thermoanaerobium brockii (TBADH), were kinetically compared. The first one involved the use of TBADH for both the principal and recycling reactions and 2-propanol 20%, v/v as the recycling substrate. The other two were based on the use of a different enzyme, glucose- or glucose-6-phosphate dehydrogenases, for in situ regeneration of NADPH. The coupled-substrate approach achieved 100% of conversion against 84% of the other two systems.

Kinetic modelling of coupled redox enzymatic systems for in situ regeneration of NADPH

Abstract In the past few years, we have been working in a complete comparative kinetic study involving three different NADPH recycling reactions having the reduction of 6-methyl-5-hepten-2-one (sulcatone) catalysed by alcohol dehydrogenase from Thermoanaerobium brockii (TBADH) and producing S -(+)-6-methyl-5-hepten-2-ol (sulcatol) as the main reaction. A fundamental step in this study involves the elucidation of the kinetic mechanism of the main reaction, which must be the rate-limiting step of the overall process in all systems studied. In the present work, we demonstrated by initial velocity and product inhibition studies that sulcatone/sulcatol reduction reaction follows a Theorell–Chance BiBi mechanism. Using the kinetic parameters hereby and previous determined, it was possible to simulate time-course curves for coupled enzymatic systems used. Considering the good correlation between the adjusted curves and experimental data it is possible to affirm that coupled enzymatic reaction systems can be kinetically described by evaluating just the kinetic behaviour of the main reaction.

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro- 2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2- (1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1, 3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na2CO3 solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 UH/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 UH/mL solvent) and 5.0 mL of Na2CO3(sat) at 40 degrees C for 6 h.

Simple method for monitoring enzymatic reactions by direct injection of the medium reaction in a gas chromatograph equipped with packed liner

Reduction of sulcatone, catalyzed by Thermoanaerobium brockii alcohol dehydrogenase in Tris/HCl buffer (pH 7.8) using 2-propanol 20% (v/v) as an NADPH regeneration system could be followed by using a gas chromatograph equipped with a packed liner that allowed the direct injection of the aqueous medium reaction. The time-course curve obtained by the analytical method here described and that obtained by spectrophotometric methods were similar.