Luciano Caseli
Federal University of São Paulo
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Luciano Caseli.
Biosensors and Bioelectronics | 2010
José R. Siqueira; Luciano Caseli; Frank N. Crespilho; Valtencir Zucolotto; Osvaldo N. Oliveira
This paper brings an overview of the use of nanostructured films in several types of biosensors, with emphasis on the advantageous control of molecular architecture which is typical of the layer-by-layer (LbL) and Langmuir-Blodgett films. Following introductory sections on film fabrication and detection methods, we concentrate on the immobilization of biomolecules on these nanostructured films used in units for biosensing. Important contributions in the literature in biosensors based on electrochemical and optical measurements are highlighted. Furthermore, a discussion is presented on how the concept of electronic tongues has been extended to biosensing, which resulted in increased sensitivity and selectivity. The integration of sensing units with micro-electronics is commented upon, especially in the context of using field-effect transistors (FETs) for biosensing. Examples of LbL and LB films containing proteins, lipids, metallic nanoparticles and carbon nanotubes, which are used for detecting a variety of analytes, will be provided. The prospects for clinical diagnosis with such biosensors are also assessed. Throughout the review, emphasis is placed on the importance of control of molecular architecture, particularly with synergistic combination of organic and inorganic materials. For example, nanostructured films containing capped gold nanoparticles or carbon nanotubes exhibited enhanced performance in biosensing. It is hoped that this survey may assist researchers in choosing materials, molecular architectures, and detection principles, which may be tailored for specific applications.
Biomacromolecules | 2010
Felippe J. Pavinatto; Luciano Caseli; Osvaldo N. Oliveira
This review paper brings an overview of the use of chitosans in nanostructured films produced with the Langmuir-Blodgett (LB) or the electrostatic layer-by-layer (LbL) techniques, with emphasis on their possible applications. From a survey in the literature one may identify three main types of study with chitosan in nanostructured films. First, the interaction between chitosans and phospholipid Langmuir monolayers has been investigated for probing the mechanisms of chitosan action in their biological applications, with the monolayers serving as cell membrane models. In the second type, chitosan serves as a matrix for immobilization of biomolecules in LB as well as in LbL films, for which chitosan is suitable to help preserve the bioactivity of such biomolecules for long periods of time even in dry, solid films. An important application of these chitosan-containing films is in sensing and biosensing. The third type of study involves exploiting the mechanical and biocompatibility properties of chitosan in producing films with enhanced properties, for example, for tissue engineering. It is emphasized that chitosans have been proven excellent building blocks to produce films with controlled molecular architecture, allowing for synergy between distinct materials. We also discuss the prospects of the field, following a critical review of the latest developments in nanostructured chitosan films.
Biochimica et Biophysica Acta | 2008
Thaís F. Schmidt; Luciano Caseli; Tapani Viitala; Osvaldo N. Oliveira
The immobilization of enzymes in nanostructured films has potential applications, e.g. in biosensing, for which the activity may not only be preserved, but also enhanced if optimized conditions are identified. Optimization is not straightforward because several requirements must be fulfilled, including a suitable matrix and film-forming technique. In this study, we show that horseradish peroxidase (HRP) has its activity enhanced when immobilized in Langmuir-Blodgett (LB) films, in conjunction with dipalmitoylphosphatidylglycerol (DPPG). Incorporation of HRP into a DPPG monolayer at the air-water interface was demonstrated with compression isotherms, and Polarization-Modulation Infrared Reflection Absorption Spectroscopy (PM-IRRAS). From the PM-IRRAS data, we inferred that HRP was not denatured when adsorbed on a pre-formed, low pressure DPPG monolayer. A change in orientation was induced by the phospholipid matrix, with the amide C=O and NH groups from HRP being oriented perpendicular to the surface, parallel to the DPPG acyl chains, i.e. the alpha-helix was inserted into the monolayer. The mixed DPPG-HRP monolayer could be transferred onto solid supports, to which HRP activity was ca. 23% higher than in solution. The control of molecular architecture and choice of a suitable phospholipid matrix allowed HRP-containing LB films to be used in sensing peroxide.
ACS Applied Materials & Interfaces | 2014
Osvaldo N. Oliveira; Rodrigo M. Iost; José R. Siqueira; Frank N. Crespilho; Luciano Caseli
Clinical diagnosis has always been dependent on the efficient immobilization of biomolecules in solid matrices with preserved activity, but significant developments have taken place in recent years with the increasing control of molecular architecture in organized films. Of particular importance is the synergy achieved with distinct materials such as nanoparticles, antibodies, enzymes, and other nanostructures, forming structures organized on the nanoscale. In this review, emphasis will be placed on nanomaterials for biosensing based on molecular recognition, where the recognition element may be an enzyme, DNA, RNA, catalytic antibody, aptamer, and labeled biomolecule. All of these elements may be assembled in nanostructured films, whose layer-by-layer nature is essential for combining different properties in the same device. Sensing can be done with a number of optical, electrical, and electrochemical methods, which may also rely on nanostructures for enhanced performance, as is the case of reporting nanoparticles in bioelectronics devices. The successful design of such devices requires investigation of interface properties of functionalized surfaces, for which a variety of experimental and theoretical methods have been used. Because diagnosis involves the acquisition of large amounts of data, statistical and computational methods are now in widespread use, and one may envisage an integrated expert system where information from different sources may be mined to generate the diagnostics.
Langmuir | 2009
Felippe J. Pavinatto; Cauê P. Pacholatti; E.A. Montanha; Luciano Caseli; Heurison S. Silva; Paulo B. Miranda; Tapani Viitala; Osvaldo N. Oliveira
The polysaccharide chitosan has been largely used in many biological applications as a fat and cholesterol reducer, bactericide agent, and wound healing material. While the efficacy for some of such uses is proven, little is known about the molecular-level interactions involved in these applications. In this study, we employ mixed Langmuir and Langmuir-Blodgett (LB) films of negatively charged dimyristoyl phosphatidic acid (DMPA) and cholesterol as cell membrane models to investigate the role of cholesterol in the molecular-level action of chitosan. Chitosan does not remove cholesterol from the monolayer. The interaction with chitosan tends to expand the DMPA monolayer due to its interpenetration within the film. On the other hand, cholesterol induces condensation of the DMPA monolayer. The competing effects cause the surface pressure isotherms of mixed DMPA-cholesterol films on a chitosan subphase to be unaffected by the cholesterol mole fraction, due to distinct degrees of chitosan penetration into the film in the presence of cholesterol. By combining polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and sum-frequency generation spectroscopy (SFG), we showed that chitosan induces order into negatively charged phospholipid layers, whereas the opposite occurs for cholesterol. In conclusion, chitosan has its penetration in the film modulated by cholesterol, and electrostatic interactions with negatively charged phospholipids, such as DMPA, are crucial for the action of chitosan.
Colloids and Surfaces B: Biointerfaces | 2002
Luciano Caseli; Maria Elisabete Darbello Zaniquelli; Rosa Prazeres Melo Furriel; Francisco A. Leone
Abstract The kinetics and the adsorption isotherms of the surfactant-solubilized alkaline phosphatase from rat osseous plate adsorbed by dip-coating on dimyristoyl phosphatidic acid (DMPA) Langmuir–Blodgett (LB) films were studied. The phosphomonohydrolase activity of the enzyme on the LB film was estimated by the hydrolysis of p-nitrophenylphosphate (PNPP). Films prepared from solutions containing 0.30 μg ml−1 of protein showed maximum activity for the supported enzyme above the critical micellar concentration of the non-ionic surfactant (polyoxyethylene-9-lauryl ether) used for enzyme solubilization. The surface density of the enzyme on DMPA LB films was determined from quartz crystal microbalance measurements. A consistent explanation concerning the maximum enzymatic activity is supported by data of surface tension for the mixed non-ionic surfactant–enzyme system.
Journal of Colloid and Interface Science | 2012
Nathaly C.M. Zanon; Osvaldo N. Oliveira; Luciano Caseli
Preserving the enzyme structure in solid films is key for producing various bioelectronic devices, including biosensors, which has normally been performed with nanostructured films that allow for control of molecular architectures. In this paper, we investigate the adsorption of uricase onto Langmuir monolayers of stearic acid (SA), and their transfer to solid supports as Langmuir-Blodgett (LB) films. Structuring of the enzyme in β-sheets was preserved in the form of 1-layer LB film, which was corroborated with a higher catalytic activity than for other uricase-containing LB film architectures where the β-sheets structuring was not preserved. The optimized architecture was also used to detect uric acid within a range covering typical concentrations in the human blood. The approach presented here not only allows for an optimized catalytic activity toward uric acid but also permits one to explain why some film architectures exhibit a superior performance.
Langmuir | 2010
Thiago E. Goto; Ricardo F. Lopez; Osvaldo N. Oliveira; Luciano Caseli
A major challenge for producing low cost biosensors based on nanostructured films with control of molecular architectures is to preserve the catalytic activity of the immobilized biomolecules. In this study, we show that catalase (HRP) keeps its activity if immobilized in Langmuir-Blodgett (LB) films of dipalmitoyl phosphatidylglycerol (DPPG). The incorporation of catalase into a DPPG monolayer at the air-water interface was demonstrated with surface pressure and surface potential isotherms, in addition to polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). According to the PM-IRRAS data, catalase was not denatured upon adsorption on a preformed DPPG monolayer and could be transferred onto a solid substrate. The catalytic activity of catalase in a mixed LB film with DPPG was ca. 13% higher than in solution. The control of molecular architecture and choice of a suitable phospholipid matrix allows catalase-containing LB films to be used in sensing hydrogen peroxide.
Langmuir | 2008
Luciano Caseli; Felippe J. Pavinatto; Thatyane M. Nobre; Maria Elisabete Darbello Zaniquelli; Tapani Viitala; Osvaldo N. Oliveira
Many chitosan biological activities depend on the interaction with biomembranes, but so far it has not been possible to obtain molecular-level evidence of chitosan action. In this article, we employ Langmuir phospholipid monolayers as cell membrane models and show that chitosan is able to remove beta-lactoglobulin (BLG) from negatively charged dimyristoyl phosphatidic acid (DMPA) and dipalmitoyl phosphatidyl glycerol (DPPG). This was shown with surface pressure isotherms and elasticity and PM-IRRAS measurements in the Langmuir monolayers, in addition to quartz crystal microbalance and fluorescence spectroscopy measurements for Langmuir-Blodgett (LB) films transferred onto solid substrates. Some specificity was noted in the removal action because chitosan was unable to remove BLG incorporated into neutral dipalmitoyl phosphatidyl choline (DPPC) and cholesterol monolayers and had no effect on horseradish peroxidase and urease interacting with DMPA. An obvious biological implication of these findings is to offer reasons that chitosan can remove BLG from lipophilic environments, as reported in the recent literature.
Colloids and Surfaces B: Biointerfaces | 2009
Cauê P. Pascholati; Esteban Parra Lopera; Felippe J. Pavinatto; Luciano Caseli; Thatyane M. Nobre; Maria Elisabete Darbello Zaniquelli; Tapani Viitala; Claudius D'Silva; Osvaldo N. Oliveira
Zwitterionic peptides with trypanocidal activity are promising lead compounds for the treatment of African Sleeping Sickness, and have motivated research into the design of compounds capable of disrupting the protozoan membrane. In this study, we use the Langmuir monolayer technique to investigate the surface properties of an antiparasitic peptide, namely S-(2,4-dinitrophenyl)glutathione di-2-propyl ester, and its interaction with a model membrane comprising a phospholipid monolayer. The drug formed stable Langmuir monolayers, whose main feature was a phase transition accompanied by a negative surface elasticity. This was attributed to aggregation upon compression due to intermolecular bond associations of the molecules, inferred from surface pressure and surface potential isotherms, Brewster angle microscopy (BAM) images, infrared spectroscopy and dynamic elasticity measurements. When co-spread with dipalmitoyl phosphatidyl choline (DPPC), the drug affected both the surface pressure and the monolayer morphology, even at high surface pressures and with low amounts of the drug. The results were interpreted by assuming a repulsive, cooperative interaction between the drug and DPPC molecules. Such repulsive interaction and the large changes in fluidity arising from drug aggregation may be related to the disruption of the membrane, which is key for the parasite killing property.