Lucrécio Costa

An Experimental Investigation of the Effect of Groove Location and Supply Pressure on the THD Performance of a Steadily Loaded Journal Bearing

This paper aims to present the results of parametric experiments carried out in order to study the influence of groove location and supply pressure on the performance of a steadily loaded journal bearing with a single-axial groove, Hydrodynamic pressure and temperature distributions on the bush surface, shaft temperature, flow rate and bush torque were measured at variable supply pressure, using bushes with a single groove located at three different positions. A series of tests were carried out for variable applied load and rotational speed. The experimental evidence shows that some bearing characteristics are significantly sensitive to changes in groove location and supply pressure. One groove located at 30 degrees in relation to the load line, in the direction of shaft rotation, can conduct to reductions in maximum temperature, maximum hydrodynamic pressure and bush torque, with a moderate increase in oil flow rate.

Experimental study of the influence of changes in load direction on the performance of a crown bearing

Laboratory tests have been carried out in order to investigate the influence of small changes in load direction on the performance of a steadily loaded hydrodynamic crown journal bearing. Hydrodynamic pressures, temperature distribution on the bush internal surface, shaft temperature, oil flow rate and bush torque were measured for fixed sets of operating conditions, at three different groove locations (Ά) with respect to the line of load (Ά = 0, −30, and +30 degrees). For each groove location quantitative information is provided concerning to the influence of applied load and shaft rotational speed on the performance characteristics. Changing the location of the groove around the load line did affect flow rate, bush torque and maximum hydrodynamic pressure, but only had a slight effect on bush maximum temperature.