Ludovico Sbordone

Oral microbial biofilms and plaque-related diseases: microbial communities and their role in the shift from oral health to disease

Many oral pathologies, such as dental caries, periodontal disease and peri-implantitis are plaque-related. Dental plaque is a microbial biofilm formed by organisms tightly bound to a solid substrate and each other by means of an exopolymer matrix. Bacteria exhibit different properties when contained within a biofilm. Knowing the mechanisms controlling the formation and development of biofilms can help to understand the emergence and progression of such pathologies and to plan effective treatment. Most periodontal pathogens are common saprophytes of the oral cavity, expressing their virulence only in a susceptible host or when some changes come about in the oral environment. Physical, metabolic and physiological interactions may cause positive or negative effects among the various microbiota present. Such mechanisms of antagonism/synergy select the bacterial population and alterations of its composition affect the balance with the host and may lead to pathology. The effectiveness of antimicrobial agents, as measured through in vitro tests, is dramatically reduced in vivo due to the properties of the microbial community: mature, intact biofilms are less sensitive to such agents, as the exopolymer matrix, bacterial enzymes and slow growth rate hinder the action of chemotherapeutic agents. The present literature review aims to examine the most representative studies, focusing on the characteristics of bacterial communities and the crucial shift from oral health to plaque-related diseases.

Volume changes of autogenous bone grafts after alveolar ridge augmentation of atrophic maxillae and mandibles

The aim of the present retrospective chart review was to determine the relationship between nonvascularized osseous graft remodeling and the three-dimensional (3D) features of grafts and recipient sites, the anatomical recipient regions and different graft sources. 32 iliac crest or chin grafts were onlay-positioned in the mandible or maxilla of 14 patients. CT scans, taken before implant positioning and after 1 year, revealed a mean volume resorption of 35-51%. For iliac crest grafts, the average resorption was 42% when the onlay was positioned in the anterior maxilla and 59% when it was positioned in the posterior mandible. Spearman correlation and 3D interpolation analysis revealed, for both iliac crest groups, a moderate or advanced remodeling pattern depending on 3D features, namely graft thickness and shape, basal bone volume of recipient site, and the basal bone/graft volume ratio of the recipient site. No statistically significant differences were found between the recipient and donor site groups. Retrospective analysis of the data indicates that iliac crest grafts, onlay-positioned on adequate basal bone volume, may register a reduced volume remodeling when shaped thick in the anterior maxilla or rounded and convex, on the external surface, in the posterior mandible.

Volume changes of autogenous bone after sinus lifting and grafting procedures: A 6-year computerized tomographic follow-up

OBJECTIVES To evaluate long-term bone remodelling of autografts over time (annually, for 6 years), comparing the block and particulate bone procedures for sinus floor elevation, as well as to evaluate the survival of positioned dental implants. PATIENTS AND METHODS Twenty-three sinus lift procedures with autogenous bone were performed: seven sinus lift procedures using particulate graft and 10 with block autogenous bone were performed in 17 patients. Employing a software program, pre- and post-surgical computerized tomography (CT) scans were used to compare the volume (V) and density (D) of inlay grafts over time (up to 6 years), and to determine the percentage of remaining bone (%R). All variable (V, D and %R) measurements were then compared statistically. RESULTS At the 6-year survey for block form, a resorption of 21.5% was seen, whereas for particulate grafts there was a resorption of 39.2%. Both groups exhibited bone remodelling between the first and second follow-up which was significant regarding volume for the block form and regarding density for the particulate group. CONCLUSIONS During the initial period of healing, the cortico-cancellous block bone grafted into the maxillary sinus underwent a negative remodelling of the volume, which is most probably due to graft cortex resorption, coupled with, primarily, an increase in density in the spongious area; for the particulate grafts, significant augmentations in density were obtained. The lack of significant differences among volumes was due to the wide degree of dispersion of the data. The rough data presented in this paper seem to support the use of a bone-block grafting procedure in maxillary sinus augmentation.

Apical and marginal bone alterations around implants in maxillary sinus augmentation grafted with autogenous bone or bovine bone material and simultaneous or delayed dental implant positioning

OBJECTIVE A re-pneumatization phenomenon was recorded in sinuses grafted with different materials. The specific aims of this paper were to assess the dental implant survival rate and the behavior of marginal and apical bone remodeling around dental implants placed following sinus augmentation. MATERIALS AND METHODS A retrospective study was conducted on consecutive patients treated in two surgical centers. Different surgical techniques were adopted for sinus augmentation: simultaneous or delayed dental implant insertion with bovine bone-material augmentation or autologous bone grafting (chin and iliac crest). Survival rates were recorded for the overall number of implants (patients of group A). Apical and marginal bone levels (ABL and MBL, respectively) were radiographically measured, and statistical analysis was performed in implants of a subgroup of patients (group B). RESULTS A total of 282 dental implants were positioned. Recorded cumulative survival rates (CSRs) were 95.6% and 100% for autogenous and bovine bone material, respectively, while CSRs at 2-year follow-up for immediate and delayed procedures were 99.3% and 96.5%. For the subgroup B, 57 sinus augmentation procedures were performed in 39 patients, with the positioning of 154 implants. Generally, the apical- and marginal-bone resorption of the bovine bone-material group was less than that of the autogenous group. The differences between the ABL values of the bovine bone-material and iliac-crest groups were statistically significant at 1 year, whereas this significance disappeared at the 2-year follow-up; tests showed that a statistical difference was recorded in the bovine bone-material group between the 1- and 2-year follow-ups. With regard to MBL comparisons between simultaneous and delayed implantation, the differences maintained their significance at the 2-year follow-up also. CONCLUSIONS Differences regarding apical bone alteration between autogenous bone from the iliac crest and bovine bone material at the 1- and 2-year follow-ups, as well as in the bovine bone-material group between the 1- and 2-year follow-ups, attested to slower but more prolonged physiologic bone remodeling in the bovine-graft-material group than in the autogenous-bone group. The MBL analysis showed that remodeling in the delayed implant group demonstrated a greater resorption in the cervical portion than was seen in the simultaneous implant group.

Volume Changes of Grafted Autogenous Bone in Sinus Augmentation Procedure

PURPOSE To evaluate associations between the osseous remodeling and the 3-dimensional features of both the grafted bone and the recipient site, as well as the density of the grafted bone, and to assess the relation between the degree of bone resorption and the type of autogenous bone-grafting procedure or the source (block or particulate bone from iliac crest or block bone from chin). PATIENTS AND METHODS A retrospective chart review of patients receiving sinus lifting and grafting procedures for implant positioning was conducted: radiographic analysis of the volume and area of both sinuses and autogenous bone grafts was performed, as per Smolka et al and Krennmair et al. The volumetric remodeling--measured at 1 year after implant positioning as the percentage of residual bone (%R)--was correlated, with Spearman analysis, to 3-dimensional features of both graft and recipient sites. All quantities correlated with %R at a statistically significant level were used for 2-dimensional and multidimensional visualizations with scattergrams. RESULTS Twenty-five iliac crest or chin grafts were inlay positioned in the maxillary sinuses of patients. Computed tomography scans, taken before implant positioning and after 1 year, showed a 1-year negligible volume remodeling for block graft from chin (97.9%) but slightly greater resorption values (%R) for particulate and block grafts from iliac crest (93.8% and 83.3%, respectively). Three- and four-dimensional scattergrams of significant data resulting from Spearman correlation tests (particulate and block grafts both from iliac crest) showed a variation of the remodeling pattern dependent on 3-dimensional features, namely inlay graft thickness, surface area of the graft in contact with basal bone, volume of the recipient site, and surface area of the graft projecting into the sinus cavity. CONCLUSIONS Retrospective data analysis shows that iliac crest grafts positioned on a small basal bone volume (≤ 2.5 mL) may point to a very favorable remodeling of the volume when the particulate graft is molded to a thickness of less than 4 mm, with a reduced surface area protruding into the sinus (≤ 5 cm(2)). Bone blocks with a reduced contact surface and with basal bone (≤ 4 cm(2)) also display minimal resorption.

Scanning Electron Microscopy Fractography Analysis of Fractured Hollow Implants

Fracture of the implant is one of the possible complications affecting dental implants; it is a rare event but of great clinical relevance. The aim of the present study was to perform a scanning electron microscopy (SEM) fractography evaluation of 7 International Team for oral Implantology (ITI) hollow implants removed because of fracture. The most common clinical risk factors, such as malocclusion, bruxism, and cantilevers on the prosthesis, were absent. Seven fractured ITI hollow implants were retrieved from 5 patients and were analyzed with the use of SEM. SEM analysis showed typical signs of a cleavage-type fracture. Fractures could be due to an association of multiple factors such as fatigue, inner defects, material electrochemical problems, and tensocorrosion.

Healing of donor defect after mandibular parasymphyseal block harvesting: a 6-year computerized tomographic follow-up.

OBJECTIVES A long-term survey on the healing potential of large-sized parasymphyseal osseous defects. PATIENTS AND METHODS Ten patients, subjected to 14 bilateral and 3 unilateral parasymphyseal bone harvesting for alveolar ridge augmentation, were selected for the retrospective chart review. CT scans were performed immediately before bone grafting, before implant insertion, and then once annually for 6 years, and the volumes of the bone defects at the buccal aspect in the healing process were measured using a software program. Volumes from the yearly measurements were then compared statistically. RESULTS Volumes of both the intrasurgical defects, 0.77 (0.20) cc and of those in the one-year group, 0.60 (0.26) cc were statistically different from volumes of all the other time intervals (from 24 to 72 months) with all p-values less than 0.002 and 0.004, respectively. The healing of osseous defects in the long-term radiographic survey (6 years) resulted in bony infill of 63%. CONCLUSION For parasymphyseal defects of 0.7 cc, a maximum possible healing of two-thirds can be expected; a re-harvesting procedure could be performed 24 months after early surgery, due to both the formation of a new buccal cortical plate and the achievement of a steady state of osseous remodelling.

Clinical survey of neurosensory side-effects of mandibular parasymphyseal bone harvesting.

The aim of the present survey was to assess neurosensory disturbances and/or tooth-pulp sensitivity losses after mandibular parasymphyseal bone-harvesting procedures. Twenty-eight harvesting areas in 16 patients were surveyed. Mucosal and skin sensitivity of the chin/lower lip, divided into four regions, were determined via Pointed-Blunt and Two-Point-Discrimination Tests. Pulp sensitivity of the mandibular teeth from the left second bicuspid to the right second bicuspid was tested by cold vitality preoperatively and 12 months postoperatively. Teeth were grouped according to sensitivity alterations and distance from the harvesting defects, as measured on CT scans, and statistically significant differences sought. At 12 months, 29% of preoperatively vital cuspids overlying the harvesting defects revealed pulp-sensitivity losses; no patient reported anaesthesia or analgesia; hypoaesthesia was present in 4% (8 sites; 2 patients), hypoalgesia was present in 3% (5 sites; 2 patients) and Two-Point-Discrimination Tests yielded pathologic responses in 5% of tested areas (10 sites; 4 patients). Teeth with and without pulp sensitivity changes were statistically indistinguishable regarding distances between root apices or mental foramen and the harvesting defect. The loss of pulp sensitivity in any tooth cannot be predicted simply on the basis of the distance between its apex and the harvesting osteotomy line.

Gene clustering analysis in human osseous remodeling

BACKGROUND Tentative bioinformatic predictions were performed to comprehend the complexity of the gene interaction networks of the T lymphocyte cell cycle and of human periodontitis. This study aims to identify and rank genes involved in osseous augmentation or bone remodeling to obtain groups with more numerous predicted associations called the leader gene clusters. METHODS An iterative search (consisting of a consecutive expansion-filtering loop) was performed for which only genes involved in a specific process were identified. For each gene, predicted associations with all other involved genes were obtained from a Web-available database (Search Tool for the Retrieval of Interacting Genes/Proteins) and the weighted number of links (WNL), given by the sum of only high-confidence predicted associations (results with a score > or =0.9), allowing gene ranking. Genes belonging to higher clustering classes were identified. RESULTS A total of 161 genes potentially involved in bone-volume augmentation and 128 genes connected with the bone-remodeling phenomenon were identified. For the bone-volume augmentation process, only one gene belonged to the leader gene group, whereas six other genes were classified as cluster B genes; for the bone-remodeling phenomenon, three leader genes were identified, whereas six other genes formed the cluster B group. No one gene belonged to leader gene clusters of both processes, whereas one gene of each higher cluster group belonged to the immediately lower cluster of the opposite process. Only three genes of the higher clusters were experimentally involved in both analyses. CONCLUSIONS A de novo identification was performed based on the data mining of leader genes involved in bone-volume augmentation or bone remodeling to acquire primeval information about their molecular basis and to plan future ad hoc targeted experiments. For several genes of the upper clusters, an active role in the bone processes was already known, but the present analysis suggested that they play a major role in the analyzed phenomena. The role of the transcription factors as leader genes and the numerous orphan genes (genes with WNL = 0) recovered probably attest to a lack of information regarding these processes, which could be further clarified through specific DNA microarray experiments.

Implant angulation: 2-year retrospective analysis on the influence of dental implant angle insertion on marginal bone resorption in maxillary and mandibular osseous onlay grafts.

ObjectivesThe purpose of this study was to determine the existence of correlations between marginal peri-implant linear bone loss and the angulation of implants in maxillary and mandibular augmented areas over the course of a 2-year survey.Materials and methodsDependent variables described the sample of the present retrospective chart review. By using three-dimensional radiographs, input variables, describing the implant angulation (buccal–lingual angle [φ] and mesial–distal angle [θ]) were measured; outcome variables described survival rate and marginal bone resorption (MBR) around dental implants in autogenous grafts (10 maxillae and 14 mandibles). Pairwise comparisons and linear correlation coefficient were computed.ResultsThe peri-implant MBR in maxillary buccal and palatal areas appeared less intensive in the presence of an increased angulation of an implant towards the palatal side. Minor MBR was recorded around mandibular dental implants positioned at a right angle and slightly angulated towards the mesial.ConclusionsResorption in buccal areas may be less intensive as the angulation of placed implants increases towards the palatal area in the maxilla, whereas for the mandible, a greater inclination towards the lingual area could be negative. In the mandibular group, when the implant was slightly angulated in the direction of the distal area, bone resorption seemed to be more marked in the buccal area.Clinical relevanceIn the planning of dental implant placement in reconstructed alveolar bone with autograft, the extremely unfavourable resorption at the buccal aspect should be considered; this marginal bone loss seemed to be very sensitive to the angulation of the dental implant.