Luigi Battaglia

Lipid nanoparticles: state of the art, new preparation methods and challenges in drug delivery

Introduction: Nanoparticles are rapidly developing as drug carriers because of their size-dependent properties. Lipid nanoparticles (LNPs) are widely employed in drug delivery because of the biocompatibility of the lipid matrix. Areas covered: Many different types of LNPs have been engineered in the last 20 years, the most important being solid lipid nanoparticles (SLNs), nanostrucured lipid carriers (NLCs), lipid–drug conjugates (LDCs) and lipid nanocapsules (LNCs). This review gives an overview of LNPs, including their physico-chemical properties and pharmacological uses. Moreover, it highlights the most important innovations in the preparation techniques of LNPs, aimed to encapsulate different molecules within the lipid matrix. Finally, it gives a short perspective on the challenges of drug delivery, which are a potential field of application for LNPs: cancer therapy, overcoming the blood–brain barrier and gene and protein delivery. Expert opinion: LNPs are a safe and versatile vehicles for drug and active delivery, suitable for different administration routes. New technologies have been developed for LNP preparation and studies are currently underway in order to obtain the encapsulation of different drugs and to deliver the active molecule to the site of action.

Preparation of solid lipid nanoparticles from W/O/W emulsions: Preliminary studies on insulin encapsulation

Abstract A method to produce solid lipid nanoparticles (SLN) from W/O/W multiple emulsions was developed applying the solvent-in-water emulsion-diffusion technique. Insulin was chosen as hydrophilic peptide drug to be dissolved in the acidic inner aqueous phase of multiple emulsions and to be consequently carried in SLN. Several partially water-miscible solvents with low toxicity were screened in order to optimize emulsions and SLN composition, after assessing that insulin did not undergo any chemical modification in the presence of the different solvents and under the production process conditions. SLN of spherical shape and with mean diameters in the 600–1200 nm range were obtained by simple water dilution of the W/O/W emulsion. Best results, in terms of SLN mean diameter and encapsulation efficiencies, were obtained using glyceryl monostearate as lipid matrix, butyl lactate as a solvent, and soy lecithin and Pluronic®F68 as surfactants. Encapsulation efficiencies up to 40% of the loaded amount were obtained, owing to the actual multiplicity of the system; the use of multiple emulsion-derived SLN can be considered a useful strategy to encapsulate a hydrophilic drug in a lipid matrix.

Solid lipid nanoparticles as vehicles of drugs to the brain: current state of the art.

Central nervous system disorders are already prevalent and steadily increasing among populations worldwide. However, most of the pharmaceuticals present on world markets are ineffective in treating cerebral diseases, because they cannot effectively cross the blood brain barrier (BBB). Solid lipid nanoparticles (SLN) are nanospheres made from biocompatible solid lipids, with unique advantages among drug carriers: they can be used as vehicles to cross the BBB. This review examines the main aspects surrounding brain delivery with SLN, and illustrates the principal mechanisms used to enhance brain uptake of the delivered drug.

Solid lipid nanoparticles formed by solvent-in-water emulsion-diffusion technique: development and influence on insulin stability.

Insulin-loaded solid lipid nanoparticles (SLN), obtained by the solvent-in-water emulsion–diffusion technique, were produced using isovaleric acid (IVA) as organic phase, glyceryl mono-stearate (GMS) as lipid, soy lecithin and sodium taurodeoxycholate (TDC) as emulsifiers. IVA, a partially water-miscible solvent with low toxicity, was used to dissolve both insulin and lipids. SLN of spherical shape were obtained by simple water dilution of the O/W emulsion. Analysis of SLN content after processing showed interesting encapsulation efficiency with respect to therapeutic doses; moreover, insulin did not undergo any chemical modification within the nanoparticles and most of it remained stable after incubation of the SLN with trypsin solution. The biological activity of insulin, i.e. the ability to decrease glycemia in rats, was not negatively influenced by the SLN production process, as after subcutaneous administration of insulin extracted from SLN to animals, the blood glucose levels were quite similar to those obtained after administration of a conventional insulin suspension. Consequently, SLN seem to have interesting possibilities as delivery systems for oral administration of insulin.

Solid lipid nanoparticles produced through a coacervation method

Solid lipid nanoparticles (SLN) of fatty acids (FAs) were prepared with a new, solvent-free technique based on FAs precipitation from their sodium salt micelles in the presence of polymeric non-ionic surfactants: this technique was called ‘coacervation’. Myristic, palmitic, stearic, arachidic and behenic acid were employed as lipid matrixes. Spherical shaped nanoparticles with mean diameters ranging from 250 to ∼500 nm were obtained. Different aqueous acidifying solutions were used to precipitate various FAs from their sodium salt micellar solution. Good encapsulation efficiency of Nile Red, a lipophilic model dye, in stearic acid nanoparticles was obtained. The coacervation method seems to be a potentially suitable technique to prepare close to monodisperse nanoparticles for drug delivery purposes.

Formulation of curcumin-loaded solid lipid nanoparticles produced by fatty acids coacervation technique

Curcumin (CU) loaded solid lipid nanoparticles (SLNs) of fatty acids (FA) were prepared with a coacervation technique based on FA precipitation from their sodium salt micelles in the presence of polymeric non-ionic surfactants. Myristic, palmitic, stearic, and behenic acids, and different polymers with various molecular weights and hydrolysis grades were employed as lipid matrixes and stabilisers, respectively. Generally, spherical-shaped nanoparticles with mean diameters below 500 nm were obtained, and using only middle-high hydrolysis, grade-polymer SLNs with diameters lower than 300 nm were produced. CU encapsulation efficiency was in the range 28–81% and highly influenced by both FA and polymer type. Chitosan hydrochloride was added to FA SLN formulations to produce bioadhesive, positively charged nanoparticles. A CU-chitosan complex formation could be hypothesised by DSC analysis, UV–vis spectra and chitosan surface tension determination. A preliminary study on HCT-116 colon cancer cells was developed to evaluate the influence of CU-loaded FA SLNs on cell viability.

Solid Lipid Nanoparticles for Potential Doxorubicin Delivery in Glioblastoma Treatment: Preliminary In Vitro Studies

The major obstacle to glioblastoma pharmacological therapy is the overcoming of the blood-brain barrier (BBB). In literature, several strategies have been proposed to overcome the BBB: in this experimental work, solid lipid nanoparticles (SLN), prepared according to fatty acid coacervation technique, are proposed as the vehicle for doxorubicin (Dox), to enhance its permeation through an artificial model of BBB. The in vitro cytotoxicity of Dox-loaded SLN has been measured on three different commercial and patient-derived glioma cell lines. Dox was entrapped within SLN thanks to hydrophobic ion pairing with negatively charged surfactants, used as counterions. Results indicate that Dox entrapped in SLN maintains its cytotoxic activity toward glioma cell lines; moreover, its permeation through hCMEC/D3 cell monolayer, assumed as a model of the BBB, was increased when the drug was entrapped in SLN. In conclusion, SLN proved to be a promising vehicle for the delivery of Dox to the brain in glioblastoma treatment.

Development of O/W nanoemulsions for ophthalmic administration of timolol.

After an initial screening of ingredients and production methods, nanoemulsions for ocular administration of timolol containing the drug as maleate (TM) or as ion-pair with AOT (TM/AOT) were prepared. The physico-chemical characterization of nanoemulsions, regarding mean diameter, pH, zeta potential, osmolarity, viscosity and surface tension, underlined their feasibility to be instilled into the eyes. Single components and emulsions were tested ex vivo on rabbit corneas to evaluate corneal irritation, that was measured according to opacity test. A marked decrease in corneal opacity was observed using the drug formulated in nanoemulsions rather than in aqueous solutions. Drug permeation and accumulation studies were performed on excised rabbit corneas. An increase in drug permeation through and accumulation into the corneas were observed using TM-AOT compared to TM due to an increase of lipophilicity of the drug as ion-pair. The introduction of chitosan (a positive charged mucoadhesive polymer) into emulsions allowed to increase TM permeation probably due to the interaction of chitosan with corneal epithelial cells.

Bevacizumab loaded solid lipid nanoparticles prepared by the coacervation technique: preliminary in vitro studies.

Glioblastoma, the most common primary brain tumor in adults, has an inauspicious prognosis, given that overcoming the blood-brain barrier is the major obstacle to the pharmacological treatment of brain tumors. As neoangiogenesis plays a key role in glioblastoma growth, the US Food and Drug Administration approved bevacizumab (BVZ), an antivascular endothelial growth factor antibody for the treatment of recurrent glioblastoma in patients whose the initial therapy has failed. In this experimental work, BVZ was entrapped in solid lipid nanoparticles (SLNs) prepared by the fatty-acid coacervation technique, thanks to the formation of a hydrophobic ion pair. BVZ activity, which was evaluated by means of four different in vitro tests on HUVEC cells, increased by 100- to 200-fold when delivered in SLNs. Moreover, SLNs can enhance the permeation of fluorescently labelled BVZ through an hCMEC/D3 cell monolayer-an in vitro model of the blood brain barrier. These results are promising, even if further in vivo studies are required to evaluate the effective potential of BVZ-loaded SLNs in glioblastoma treatment.

Application of lipid nanoparticles to ocular drug delivery

ABSTRACT Introduction: Although eye drops are widely used as drug delivery systems for the anterior segment of the eye, they are also associated with poor drug bioavailability due to transient contact time and rapid washout by tearing. Moreover, effective drug delivery to the posterior segment of the eye is challenging, and alternative routes of administration (periocular and intravitreal) are generally needed, the blood–retinal barrier being the major obstacle to systemic drug delivery. Areas covered: Nanotechnology, and especially lipid nanoparticles, can improve the therapeutic efficiency, compliance and safety of ocular drugs, administered via different routes, to both the anterior and posterior segment of the eye. This review highlights the main ocular barriers to drug delivery, as well as the most common eye diseases suitable for pharmacological treatment in which lipid nanoparticles have proved efficacious as alternative delivery systems. Expert opinion: Lipid-based nanocarriers are among the most biocompatible and versatile means for ocular delivery. Mucoadhesion with consequent increase in pre-corneal retention time, and enhanced permeation due to cellular uptake by corneal epithelial cells, are the essential goals for topical lipid nanoparticle delivery. Gene delivery to the retina has shown very promising results after intravitreal administration of lipid nanoparticles as non-viral vectors.