Luigi Sportelli

Lipid membranes with grafted polymers: physicochemical aspects

Membranes grafted with water-soluble polymers resist protein adsorption and adhesion to cellular surfaces. Liposomes with surface-grafted polymers therefore find applications in drug delivery. The physicochemical properties of polymer-grafted lipid membranes are reviewed with mean-field and scaling theories from polymer physics. Topics covered are: mushroom-brush transitions, membrane expansion and elasticity, bilayer-micelle transitions, membrane-membrane interactions and protein-membrane interactions.

Lipid membrane expansion and micelle formation by polymer-grafted lipids: scaling with polymer length studied by spin-label electron spin resonance.

Spin-label electron spin resonance (ESR) spectroscopy and auxiliary optical density measurements are used to study lipid dispersions of N-poly(ethylene glycol)-dipalmitoyl phosphatidylethanolamine (PEG:5000-DPPE) mixed with dipalmitoyl phosphatidylcholine (DPPC). PEG:5000-DPPE bears a large hydrophilic polymer headgroup (with approximately 114 oxyethylene monomers) and is commonly used for steric stabilization of liposomes used in drug delivery. Comparison is made with results from mixtures of DPPC with polymer lipids bearing shorter headgroups (approximately 45 and 8 oxyethylene monomers). ESR spectra of phosphatidylcholine spin-labeled on the 5-C atom position of the sn-2 chain are shown to reflect the area expansion of the lipid membranes by the lateral pressure exerted in the polymer brush, in a way that is consistent with theory. The lipid chain packing density at the onset of micelle formation is the same for all three PEG-lipids, although the mole fraction at which this occurs differs greatly. The mole fraction at onset scales inversely with the size of the polymer headgroup, where the experimental exponent of 0.7 is close to theoretical predictions (viz. 0.55-0.6). The mole fraction of PEG-lipid at completion of micelle formation is more weakly dependent on polymer size, which conforms with theoretical predictions. At high mole fractions of PEG:5000-DPPE the dependence of lipid packing density on mole fraction is multiphasic, which differs qualitatively from the monotonic decrease in packing density found with the shorter polymer lipids. Lipid spin-label ESR is an experimental tool that complements theoretical analysis using polymer models combined with the lipid equation of state.

A Spectroscopic and Calorimetric Investigation on the Thermal Stability of the Cys3Ala/Cys26Ala Azurin Mutant

The disulfide bond connecting Cys-3 and Cys-26 in wild type azurin has been removed to study the contribution of the -SS- bond to the high thermal resistance previously registered for this protein (. J. Phys. Chem. 99:14864-14870). Site-directed mutagenesis was used to replace both cysteines for alanines. The characterization of the Cys-3Ala/Cys-26Ala azurin mutant has been carried out by means of electron paramagnetic resonance spectroscopy at 77 K, UV-VIS optical absorption, fluorescence emission and circular dichroism at room temperature. The results show that the spectral features of the Cys-3Ala/Cys-26Ala azurin resemble those of the wild type azurin, indicating that the double mutation does not affect either the formation of the proteins overall structure or the assembly of the metal-binding site. The thermal unfolding of the Cys-3Ala/Cys-26Ala azurin has been followed by differential scanning calorimetry, optical absorption variation at lambda(max) = 625 nm, and fluorescence emission using 295 nm as excitation wavelength. The analysis of the data shows that the thermal transition from the native to the denaturated state of the modified azurin follows the same multistep unfolding pathway as observed in wild type azurin. However, the removal of the disulfide bridge results in a dramatic reduction of the thermodynamic stability of the protein. In fact, the transition temperatures registered by the different techniques are down-shifted by about 20 degrees C with respect to wild type azurin. Moreover, the Gibbs free energy value is about half of that found for the native azurin. These results suggest that the disulfide bridge is a structural element that significantly contributes to the high stability of wild type azurin.

Molecular and Mesoscopic Properties of Hydrophilic Polymer-Grafted Phospholipids Mixed with Phosphatidylcholine in Aqueous Dispersion: Interaction of Dipalmitoyl N-Poly(Ethylene Glycol) Phosphatidylethanolamine with Dipalmitoylphosphatidylcholine Studied by Spectrophotometry and Spin-Label Electron Spin Resonance

Spin-label electron spin resonance (ESR) spectroscopy, together with optical density measurements, has been used to investigate, at both the molecular and supramolecular levels, the interactions of N-poly(ethylene glycol)-phosphatidylethanolamines (PEG-PE) with phosphatidylcholine (PC) in aqueous dispersions. PEG-PEs are micelle-forming hydrophilic polymer-grafted lipids that are used extensively for steric stabilization of PC liposomes to increase their lifetimes in the blood circulation. All lipids had dipalmitoyl (C16:0) chains, and the polymer polar group of the PEG-PE lipids had a mean molecular mass of either 350 or 2000 Da. PC/PEG-PE mixtures were investigated over the entire range of relative compositions. Spin-label ESR was used quantitatively to investigate bilayer-micelle conversion with increasing PEG-PE content by measurements at temperatures for which the bilayer membrane component of the mixture was in the gel phase. Both saturation transfer ESR and optical density measurements were used to obtain information on the dependence of lipid aggregate size on PEG-PE content. It is found that the stable state of lipid aggregation is strongly dependent not only on PEG-PE content but also on the size of the hydrophilic polar group. These biophysical properties may be used for optimized design of sterically stabilized liposomes.

Intramembrane Polarity by Electron Spin Echo Spectroscopy of Labeled Lipids

The association of water (D(2)O) with phospholipid membranes was studied by using pulsed-electron spin resonance techniques. We measured the deuterium electron spin echo modulation of spin-labeled phospholipids by D(2)O in membranes of dipalmitoyl phosphatidylcholine with and without 50 mol% of cholesterol. The Fourier transform of the relaxation-corrected two-pulse echo decay curve reveals peaks, at one and two times the deuterium NMR frequency, that arise from the dipolar hyperfine interaction of the deuterium nucleus with the unpaired electron spin of the nitroxide-labeled lipid. For phosphatidylcholine spin-labeled at different positions down the sn-2 chain, the amplitude of the deuterium signal decreases toward the center of the membrane, and is reduced to zero from the C-12 atom position onward. At chain positions C-5 and C-7 closer to the phospholipid headgroups, the amplitude of the deuterium signal is greater in the presence of cholesterol than in its absence. These results are in good agreement with more indirect measurements of the transmembrane polarity profile that are based on the (14)N-hyperfine splittings in the conventional continuous-wave electron spin resonance spectrum.

Sterically stabilized liposomes of DPPC/DPPE-PEG:2000. A spin label ESR and spectrophotometric study.

The chain dynamics and the thermotropic phase behavior of sterically stabilized liposomes obtained introducing in the host bilayer matrix of DPPC up to 7 mol% of the polymer-lipid DPPE-PEG:2000 were investigated by spin label electron spin resonance spectroscopy and spectrophotometry. The experimental data indicate that the dispersions have the dynamic and thermotropic characteristics of normal lamellar phase. Moreover, using spin labels that locate both in the interfacial and in the hydrocarbon regions, namely TEMPO-stearate, 5- and 16-PCSL, we find that relative to the unmodified DPPC bilayers, the polymer-grafted bilayers are loosely packed in the interfacial region and have reduced chain mobility in the gel phase. From the temperature dependence of the partition coefficient (P(c)), of the spin probe DTBN between the aqueous and the fluid hydrophobic regions of the bilayers and from the melting curves of the absorbance at 400 nm, we observe a slight influence on the endothermic phase transitions when increasing the concentration of the polymer-lipid in the DPPC bilayers, the influence being more evident in the pre-transition.

Early stage aggregation of human serum albumin in the presence of metal ions

The heat induced aggregation of human serum albumin (HSA) with and without an equimolar amount of Cu(II) and Zn(II) was investigated by using optical absorption, fluorescence, AFM and EPR spectroscopy. Turbidity experiments as a function of temperature indicate that the protein aggregation occurs after the melting of the protein. The kinetic of HSA aggregation, investigated between 60 and 70°C by monitoring the optical density changes at 400nm on a 180min time window, shows an exponential growth with a rate that increases with the temperature. Fluorescence of the thioflavin T evidences a significant increase of the intensity at 480nm at increasing incubation time. These results combined with AFM experiments show that the protein aggregates are elongated oligomers with fibrillar-like features. The absence of a lag-phase suggests that the early stage aggregation of HSA follows a downhill pathway that does not require the formation of an organized nucleus. The presence of Cu(II) and Zn(II) ions does not affect the thermally induced aggregation process and the morphology of HSA aggregates. The result is compatible with the binding of the metal ions to the protein in the native state and with the high conformational stability of HSA.

Interaction of human serum albumin with membranes containing polymer-grafted lipids: spin-label ESR studies in the mushroom and brush regimes

The adsorption of human serum albumin (HSA) to dipalmitoyl phosphatidylcholine (DPPC) bilayer membranes containing poly(ethylene glycol)-grafted dipalmitoyl phosphatidylethanolamine (PEG-DPPE) was studied as a function of content and headgroup size of the polymer lipid. In the absence of protein, conversion from the low-density mushroom regime to the high-density brush regime of polymer-lipid content is detected by the change in ESR outer hyperfine splitting, 2A(max), of chain spin-labelled phosphatidylcholine in gel-phase membranes. The values of 2A(max) remain constant in the mushroom regime, but decrease on entering the brush regime. Conversion between the two regimes occurs at mole fractions X(PEG)(m-->b) approximately 0.04, 0.01-0.02 and 0.005-0.01 for PEG-DPPE with mean PEG molecular masses of 350, 2000 and 5000 Da, respectively, as expected theoretically. Adsorption of HSA to DPPC membranes is detected as a decrease of the spin label 2A(max) hyperfine splitting in the gel phase. Saturation is obtained at a protein/lipid ratio of ca. 1:1 w/w. In the presence of polymer-grafted lipids, HSA adsorbs to DPPC membranes only in the mushroom regime, irrespective of polymer length. In the brush regime, the spin-label values of 2A(max) are unchanged in the presence of protein. Even in the mushroom regime, protein adsorption progressively becomes strongly attenuated as a result of the steric stabilization exerted by the polymer lipid. These results are in agreement with theoretical estimates of the lateral pressure exerted by the grafted polymer in the brush and mushroom regimes, respectively.

Lipid chain length effect on the phase behaviour of PCs/PEG:2000-PEs mixtures. A spin label electron spin resonance and spectrophotometric study.

Spin-label electron spin resonance (ESR) spectroscopy and spectrophotometry at fixed wavelength are used to study fully hydrated aqueous dispersions of phosphatidylcholines (PCs) with poly(ethylene glycol:2000)-phosphatidylethanolamines (PEG:2000-PEs). PEG:2000-PE is a micelle-forming polymer-lipid that is extensively used for increasing the lifetime of PC liposomes in the blood circulation through a steric stabilisation effect. The PC lipids and the PEG:2000-PE polymer-lipids have the same acyl chain length of either dimiristoyl (DM) or distearoyl (DS) chains. DMPC/PEG:2000-DMPE and DSPC/PEG:2000-DSPE mixtures were investigated over the entire range of relative compositions (0-100 mol%). In both dispersions, the low-temperature conventional spin label ESR spectra and the temperature dependence of the absorbance at 400 nm give an indication of the conversion from lamellae to micelles with increasing PEG:2000-PEs content. The physical state of the lipid assemblies, lamellar or micellar, is dependent not only on PEG:2000-PEs content, but also on the length of hydrocarbon chain of the lipid matrix. Micellisation is attained more readily in dispersions with longer hydrocarbon chains (i.e. in DSPC/PEG:2000-DSPE mixtures) than in those with shorter acyl chains (i.e. in DMPC/PEG:2000-DMPE mixtures). Saturation transfer ESR (ST-ESR) and absorbance measurements reflect the disaggregation of the bilayers and a reduction in the size of the lipid aggregates by PEG:2000-PEs at low content.

Thermally induced denaturation and aggregation of BLG-A: effect of the Cu 2+ and Zn 2+ metal ions

There is growing evidence that metal ions can accelerate the aggregation process of several proteins. This process, associated with several neuro-degenerative diseases, has been reported also for non-pathological proteins. In the present work, the effects of copper and zinc ions on the denaturation and aggregation processes of β-lactoglobulin A (BLG-A) are investigated by differential scanning calorimetry (DSC), fluorescence, electron paramagnetic resonance (EPR) and optical density. The DSC profiles reveal that the thermal behaviour of BLG-A is a complex process, strongly dependent on the protein concentration. For concentrations ≤0.13 mM, the thermogram shows an endothermic peak at 84.3°C, corresponding to denaturation; for concentrations >0.13 mM an exothermic peak also appears, above 90°C, related to the aggregation of the denaturated BLG-A molecules. The thioflavin T fluorescence indicates that the thermally induced aggregates show fibrillar features. The presence of either equimolar Cu2+ or Zn2+ ions in the protein solution has different effects. In particular, copper binds to the protein in the native state, as evidenced by EPR experiments, and destabilizes BLG-A by decreasing the denaturation temperature by about 10°C, whereas zinc ions probably perturb the partially denaturated state of the protein. The kinetics of BLG-A aggregation shows that both metal ions abolish the lag phase before the aggregation starts. Moreover, the rate of the process is 4.6-fold higher in the presence of copper, whereas the effect of zinc is negligible. The increase of the aggregation rate, induced by copper, may be due to a site-specific binding of the metal ion on the protein.