Luisa Ghelardini

Biogeographical patterns and determinants of invasion by forest pathogens in Europe

A large database of invasive forest pathogens (IFPs) was developed to investigate the patterns and determinants of invasion in Europe. Detailed taxonomic and biological information on the invasive species was combined with country-specific data on land use, climate, and the time since invasion to identify the determinants of invasiveness, and to differentiate the class of environments which share territorial and climate features associated with a susceptibility to invasion. IFPs increased exponentially in the last four decades. Until 1919, IFPs already present moved across Europe. Then, new IFPs were introduced mainly from North America, and recently from Asia. Hybrid pathogens also appeared. Countries with a wider range of environments, higher human impact or international trade hosted more IFPs. Rainfall influenced the diffusion rates. Environmental conditions of the new and original ranges and systematic and ecological attributes affected invasiveness. Further spread of established IFPs is expected in countries that have experienced commercial isolation in the recent past. Densely populated countries with high environmental diversity may be the weakest links in attempts to prevent new arrivals. Tight coordination of actions against new arrivals is needed. Eradication seems impossible, and prevention seems the only reliable measure, although this will be difficult in the face of global mobility.

Optimizing nitrogen economy under drought: increased leaf nitrogen is an acclimation to water stress in willow (Salix spp.)

Background and Aims The major objective was to identify plant traits functionally important for optimization of shoot growth and nitrogen (N) economy under drought. Although increased leaf N content (area basis) has been observed in dry environments and theory predicts increased leaf N to be an acclimation to drought, experimental evidence for the prediction is rare. Methods A pedigree of 200 full-sibling hybrid willows was pot-grown in a glasshouse in three replicate blocks and exposed to two water regimes for 3 weeks. Drought conditions were simulated as repeated periods of water shortage. The total leaf mass and area, leaf area efficiency (shoot growth per unit leaf area, EA), area-based leaf N content (NA), total leaf N pool (NL) and leaf N efficiency (shoot growth per unit leaf N, EN) were assessed. Key Results In the water-stress treatment, shoot biomass growth was N limited in the genotypes with low NL, but increasingly limited by other factors in the genotypes with greatest NL. The NA was increased by drought, and drought-induced shift in NA varied between genotypes (significant G × E). Judged from the EA–NA relationship, optimal NA was 16 % higher in the water-stress compared with the well-watered treatment. Biomass allocation to leaves and shoots varied between treatments, but the treatment response of the leaf : shoot ratio was similar across all genotypes. Conclusions It is concluded that N-uptake efficiency and leaf N efficiency are important traits to improve growth under drought. Increased leaf N content (area basis) is an acclimation to optimize N economy under drought. The leaf N content is an interesting trait for breeding of willow bioenergy crops in a climate change future. In contrast, leaf biomass allocation is a less interesting breeding target to improve yield under drought.

Breeding against Dutch elm disease adapted to the Mediterranean climate

Breeding for resistance was considered one of the possible ways to limit the damages caused by the epidemics of Dutch elm disease (DED) during the last century. The elm breeding program developed by CNR in Italy was based on the idea that the Mediterranean environment would need its own specific selections. A base broadening of the genetic resources was operated. A base of native elms with a set of good characters to act as parents was bred with different Asian elm species that showed the ability of acclimatization to the different climates in which elms have to be planted. For this aim a large collection of elm species was constituted, followed by hybridisation studies. Progenies were tested for DED resistance. The more resistant clones were planted in trial fields characterised by contrasting Mediterranean climates in order to select the best potential genotypes adapted either to coastal or to mountain environmental conditions. More than 60 clones resistant, fast-growing and showing remarkable aesthetic ornamental characters were obtained.

Bud dormancy release in elm (Ulmus spp.) clones—a case study of photoperiod and temperature responses

Dormancy release as influenced by duration of outdoor winter chilling in Florence (Italy) was studied under different photoperiodic and temperature treatments in collected twigs of two European (Ulmus glabra Huds. and Ulmus minor Mill.) and four Asian (Ulmus pumila L., Ulmus parvifolia Jacq., Ulmus macrocarpa Hance and Ulmus villosa Brandis) elm clones. Photoperiod had no effect on dormancy release, and there was no evidence that photoperiod affected bud burst during quiescence in the studied elm clones. Thermal time (day degrees >0 degrees C) to bud burst decreased in all the clones with increasing outdoor chilling. Although all the clones exhibited a rather weak dormancy, they significantly differed from each other. Dormancy was released earlier in the Asian than in the European clones, and the clones could be ranked from the U. pumila clone (very weak and short dormancy) to the U. minor clone (relatively stronger and longer dormancy), the other clones being intermediate. In all the clones except U. minor, the observed decrement in thermal time to bud burst was efficiently explained as an inverse exponential function of the number of chill days < or =5 degrees C received outdoor in autumn and winter. Endodormancy, as measured by the single-node cuttings test, was weak and short in all the clones. The latter result suggests that correlative inhibitions were largely responsible for preventing bud burst during winter in these elm clones.

Genetic architecture of spring and autumn phenology in Salix

BackgroundIn woody plants from temperate regions, adaptation to the local climate results in annual cycles of growth and dormancy, and optimal regulation of these cycles are critical for growth, long-term survival, and competitive success. In this study we have investigated the genetic background to growth phenology in a Salix pedigree by assessing genetic and phenotypic variation in growth cessation, leaf senescence and bud burst in different years and environments. A previously constructed linkage map using the same pedigree and anchored to the annotated genome of P. trichocarpa was improved in target regions and used for QTL analysis of the traits. The major aims in this study were to map QTLs for phenology traits in Salix, and to identify candidate genes in QTL hot spots through comparative mapping with the closely related Populus trichocarpa.ResultsAll traits varied significantly among genotypes and the broad-sense heritabilities ranged between 0.5 and 0.9, with the highest for leaf senescence. In total across experiment and years, 80 QTLs were detected. For individual traits, the QTLs explained together from 21.5 to 56.5% of the variation. Generally each individual QTL explained a low amount of the variation but three QTLs explained above 15% of the variation with one QTL for leaf senescence explaining 34% of the variation. The majority of the QTLs were recurrently identified across traits, years and environments. Two hotspots were identified on linkage group (LG) II and X where narrow QTLs for all traits co-localized.ConclusionsThis study provides the most detailed analysis of QTL detection for phenology in Salix conducted so far. Several hotspot regions were found where QTLs for different traits and QTLs for the same trait but identified during different years co-localised. Many QTLs co-localised with QTLs found in poplar for similar traits that could indicate common pathways for these traits in Salicaceae. This study is an important first step in identifying QTLs and candidate genes for phenology traits in Salix.

Rapid Detection of Ceratocystis platani Inoculum by Quantitative Real-Time PCR Assay

ABSTRACT Ceratocystis platani is the causal agent of canker stain of plane trees, a lethal disease able to kill mature trees in one or two successive growing seasons. The pathogen is a quarantine organism and has a negative impact on anthropogenic and natural populations of plane trees. Contaminated sawdust produced during pruning and sanitation fellings can contribute to disease spread. The goal of this study was to design a rapid, real-time quantitative PCR assay to detect a C. platani airborne inoculum. Airborne inoculum traps (AITs) were placed in an urban setting in the city of Florence, Italy, where the disease was present. Primers and TaqMan minor groove binder (MGB) probes were designed to target cerato-platanin (CP) and internal transcribed spacer 2 (ITS2) genes. The detection limits of the assay were 0.05 pg/μl and 2 fg/μl of fungal DNA for CP and ITS, respectively. Pathogen detection directly from AITs demonstrated specificity and high sensitivity for C. platani, detecting DNA concentrations as low as 1.2 × 10−2 to 1.4 × 10−2 pg/μl, corresponding to ∼10 conidia per ml. Airborne inoculum traps were able to detect the C. platani inoculum within 200 m of the closest symptomatic infected plane tree. The combination of airborne trapping and real-time quantitative PCR assay provides a rapid and sensitive method for the specific detection of a C. platani inoculum. This technique may be used to identify the period of highest risk of pathogen spread in a site, thus helping disease management.

Vegetative bud-burst variability of European elms

The bud-burst dates of clones of Ulmus minor, Ulmus glabra, and Ulmus laevis were recorded in the field during the spring of 2000, 2001 and 2002 at six locations in five European countries. Meteorological data were obtained from stations close to the plots. Thermal time to bud-burst (T) and chilling (C) were calculated. A relationship on the form T=a+b e rC was fitted for each species. In the three species, winter rest release seems to be controlled by two opposite quantitative effects of the temperature, which interrelate according to an inverse exponential relation. Besides, the bud-burst date was found to be stable between years characterised by different winter thermal trends. These three Elm species have small chilling requirements. U. minor has chilling requirements lower than those of the other two species, in agreement with the more southern distribution.

Ecology of invasive forest pathogens

Invasive forest pathogens are a major threat to forests worldwide, causing increasing damage. The knowledge of both the specific traits underlying the capacity of a pathogen to become invasive, and the attributes predisposing an environment to invasion are to be thoroughly understood in order to deal with forest invasions. This paper summarizes the historical knowledge on this subject. Many aspects of the ecological processes underlying alien forest pathogens invasions are still unknown, which raises several scientific issues that need further study. The introduction of invasive forest pathogens to areas where naïve hosts are found, is mainly due to global plant trade. Rapid transportation and reduced delivery times increase the chances of survival of pathogen propagules and of their successful establishment in new environments. In forest pathogens, the reproduction mode seems not to be a crucial determinant of invasiveness, as highly destructive pathogens have a variety of reproductive strategies. The most important drivers of forest pathogen invasions appear to be (a) great adaptability to new environmental conditions; (b) efficient dispersal over long and short distances, possibly assisted by the capacity to form novel associations with endemic and/or alien insect vectors; (c) the ability to exchange genetic material or hybridize with resident or alien species. Moreover, these features interact with some key traits of the invaded environment, e.g. environmental variability and biodiversity richness. Host resistance and natural enemies may occur as a result of rapid selection/adaptation after the epidemic phase of invasion.

Geosmithia-Ophiostoma: a New Fungus-Fungus Association

In Europe as in North America, elms are devastated by Dutch elm disease (DED), caused by the alien ascomycete Ophiostoma novo-ulmi. Pathogen dispersal and transmission are ensured by local species of bark beetles, which established a novel association with the fungus. Elm bark beetles also transport the Geosmithia fungi genus that is found in scolytids’ galleries colonized by O. novo-ulmi. Widespread horizontal gene transfer between O. novo-ulmi and Geosmithia was recently observed. In order to define the relation between these two fungi in the DED pathosystem, O. novo-ulmi and Geosmithia species from elm, including a GFP-tagged strain, were grown in dual culture and mycelial interactions were observed by light and fluorescence microscopy. Growth and sporulation of O. novo-ulmi in the absence or presence of Geosmithia were compared. The impact of Geosmithia on DED severity was tested in vivo by co-inoculating Geosmithia and O. novo-ulmi in elms. A close and stable relation was observed between the two fungi, which may be classified as mycoparasitism by Geosmithia on O. novo-ulmi. These results prove the existence of a new component in the complex of organisms involved in DED, which might be capable of reducing the disease impact.

Correction to: Geosmithia-Ophiostoma: a New Fungus-Fungus Association

The article Geosmithia-Ophiostoma: a New Fungus-Fungus Association, written by Alessia L. Pepori, Priscilla P. Bettini, Cecilia Comparini, Sabrina Sarrocco, Anna Bonini, Arcangela Frascella, Luisa Ghelardini, & Aniello Scala, Giovanni Vannacci, Alberto Santini.