Lutz Asmus

Solutions as solutions – Synthesis and use of a liquid polyester excipient to dissolve lipophilic drugs and formulate sustained-release parenterals

Solid poly(lactides) and poly(lactide-co-glycolides) are widely used polymers for sustained-release parenterals. However, they have some unfavorable properties regarding manufacturing of the formulations and administration to the patient due to their solid aggregate state. In contrast, hexyl-substituted poly(lactic acid) (hexPLA, poly(2-hydroxyoctanoic acid)) is a viscous degradable polyester. To date, a two-step ring-opening polymerization was used for its synthesis. Here, we investigated a novel one-pot one-step melt polycondensation method to prepare hexPLA for biomedical applications by a simple green chemistry process. No catalyst or solely pharmaceutically acceptable catalysts and environmentally friendly purification methods without organic solvents were used. The resulting hexPLA polymers are stable under dry heat sterilization conditions. Low molecular weight hexPLAs with less than 5000 g/mol are less viscous than high molecular weight polymers. HexPLA can dissolve lipophilic active substances, with generally high incorporation capacities in low molecular weight polymers. The incorporation of solid compounds increases the viscosity and glass transition temperature, whereas the addition of small amounts of plasticizers or sparse warming significantly decreases the viscosity. Loratadine is soluble in hexPLA up to 28%. This highly concentrated Loratadine-hexPLA formulation released the active compound entirely over 14 days without initial burst in a zero order kinetic, matching the clinical requirements for such a sustained-release formulation. This demonstrates the potential of hexPLA as an excipient for injectable sustained-release formulations.

Single processing step toward injectable sustained-release formulations of Triptorelin based on a novel degradable semi-solid polymer

Poly(lactic acid) is a widely used polymer for parenteral sustained-release formulations. But its solid state at room-temperature complicates the formulation process, and elaborate formulation systems like microparticles and self-precipitating implants are required for administration. In contrast, hexylsubstituted poly(lactic acid) (hexPLA) is a viscous, biodegradable liquid, which can simply be mixed with the active compound. In this study, the feasibility to prepare injectable suspension formulations with peptides was addressed on the example of the GnRH-agonist Triptorelin. Two formulation procedures, of which one was a straight forward one-step cryo-milling-mixing process, were compared regarding the particle size of the peptide in the polymer matrix, distribution, and drug release. This beneficial method resulted in a homogeneous formulation with an average particle diameter of the incorporated Triptorelin of only 4.1 μm. The rheological behavior of the Triptorelin-hexPLA formulations was assessed and showed thixotropic and shear-thinning behavior. Viscosity and injectability were highly dependent on the drug loading, polymer molecular weight, and temperature. Nine formulations with drug loadings from 2.5% to 10% and hexPLA molecular weights between 1500 and 5000 g/mol were investigated in release experiments, and all displayed a long-term release for over 3 months. Formulations with hexPLA of 1500 g/mol showed a viscosity-dependent release and hexPLA-Triptorelin formulations of over 2500 g/mol a molecular weight-dependent release profile. In consequence, the burst release and rate of release were controllable by adapting the drug loading and the molecular weight of the hexPLA. The degradation characteristics of the hexPLA polymer during the in vitro release experiment were studied by following the molecular weight decrease and weight loss. Triptorelin-hexPLA formulations had interesting sustained-release characteristics justifying further investigations in the drug-polymer interactions and the in vivo behavior.

In vivo biocompatibility, sustained-release and stability of triptorelin formulations based on a liquid, degradable polymer.

Hexylsubstituted poly(lactic acid) (hexPLA) is a viscous polymer, which degrades in the presence of water similar to the structure related poly(lactic acid). With hydrophilic active compounds, like Triptorelin acetate, the lipophilic polymer was formulated in form of parenterally injectable suspensions. This first in vivo study toward the biocompatibility of hexPLA implants in rats over 3 months in comparison to in situ forming poly(lactic-co-glycolic acid) (PLGA) formulations is presented here. The hexPLA implants showed only a mild acute inflammation at the injection site after application, which continuously regressed. In contrast to the PLGA formulations, hexPLA did not provoke an encapsulation of the implant with extracellular matrix. Prior to the formulation application, the stability of Triptorelin inside the hexPLA matrix was assessed under different storage conditions and in the presence of buffer to simulate a peptide degrading environment. At 5°C Triptorelin showed a stability of 98% inside the polymer for at least 6 months. The stability was still 78% at an elevated temperature of 40°C. HexPLA protected the incorporated peptide from the surrounding aqueous environment, which resulted in 20% less degradation inside the polymer compared to the solution. This protection effect supports the use of Triptorelin-hexPLA formulations for parenteral sustained-release formulations. In a second in vivo evaluation in Wistar Hannover rats, formulations containing 5% and 10% Triptorelin in the polymeric matrix released the active compound continuously for 6 months. The formulations showed a higher release during the initial 7 days, which is necessary for the clinical use to down-regulate all GnRH-receptors. Afterwards, a zero order drug release was observed over the first 3 months. After 3 months, the plasma levels decreased slowly but remained at effective concentrations for the total of 6 months. Furthermore, a qualitative in vitro-in vivo correlation was observed, possibly facilitating future optimization of the Triptorelin-hexPLA sustained-release formulations.

Solutions for lipophilic drugs: a biodegradable polymer acting as solvent, matrix, and carrier to solve drug delivery issues.

The purpose of this study was to investigate the polyester hexylsubstituted poly(lactide) (hexPLA) as a possible solvent for lipophilic substances and excipient for pharmaceutical formulations. HexPLA is a biodegradable and semi-solid polymer, which allows the incorporation of active substances by simple mixing and local or systemic application to the patient through injection. The solvent behavior of hexPLA was investigated by adding the lipophilic dye Sudan III to the polymer matrix and optical monitoring of the dissolution process over time by microscopy. As a drug, the antipsychotic compound Haloperidol was analyzed for its solubility in hexPLA of different molecular weights by preparing saturated solutions, and measuring the amount of incorporated drug with UV spectroscopy. The influence of the rate of solubilized to suspended drug on the burst release behavior of Haloperidol from hexPLA-formulations was investigated in release tests. It is demonstrated that hexPLA dissolves both lipophilic substances, Sudan III and Haloperidol. In the molecular weight range between 2,000 g/mol and 10,000 g/mol, a lower molecular weight hexPLA resulted in a higher incorporation capacity for Haloperidol. By changing from a suspension formulation of Haloperidol to a solution formulation, the initial burst release established for classical PLA and PLGA systems could be minimized. HexPLA is shown to be a potent solvent and excipient for lipophilic drugs, allowing the initial burst of drug release to be modified and controlled.

Design and in vitro assessment of L-lactic acid-based copolymers as prodrug and carrier for intravitreal sustained L-lactate release to reverse retinal arteriolar occlusions

Ophthalmic conditions in which the retinal vasculature is obstructed generally lead to vision loss. Administration of the vasodilator L-lactate might offer a treatment strategy by restoring the blood flow, but unfortunately its effect after single intravitreal injection is short-lived. This study describes a concept in which the sustained release of L-lactic acid from a biodegradable copolymer system is investigated. The 50:50 (n/n) copolymer system, composed of L-lactic acid and L,D-2-hydroxyoctanoic acid, is a viscous injectable that will form an intravitreal drug depot. Hydrolysis of the copolymer will automatically lead to the release of L-lactic acid, which will convert to L-lactate at physiological pH, thereby providing a carrier and pro-drug in one. In vitro and ex vivo release studies demonstrate an L-lactic acid release over several weeks. Biocompatibility of the co-polymer and its degradation products is shown on a human retinal pigment epithelial cell line and on ex vivo retinal tissues. A low molecular weight copolymer (1200 g/mol) with low polydispersity has promising properties with a constant release profile, good biocompatibility and injectability.

Development of an intravitreal peptide (BQ123) sustained release system based on poly(2-hydroxyoctanoic acid) aiming at a retinal vasodilator response.

PURPOSE Development of a novel formulation for intravitreal administration, in which the endothelinA receptor antagonist BQ123 is incorporated in a biodegradable and injectable polymer drug delivery system, poly(2-hydroxyoctanoic acid), aiming at a prolonged retinal vasodilator response. METHODS BQ123 was incorporated in poly(2-hydroxyoctanoic acid), leading to an easily injectable, homogenous mixture. In vitro release profiles were obtained in porcine vitreous humor (n=6). The ex vivo biocompatibility was studied by placing the formulation in contact with porcine retinal tissues and performing histology. In a pilot in vivo study, the change in retinal vessel diameter of mini pigs (n=2) was followed over 3 h after an intravitreal injection of the formulation, as well as the release of BQ123 from the polymer system for approximately 7 days (n=6). RESULTS In vitro, a constant release profile was obtained, releasing approximately 91% of BQ123 within 7 days. Histology on the porcine retinal tissues showed good ex vivo biocompatibility. In vivo, a vasodilative response was observed, with a retinal vessel diameter increase from 14% after 15 min, for approximately 39% after 3 h. At t=3 h, the BQ123 concentration in the vitreous humor was 0.7±0.2 μg/mL, followed by 1.5±1.0 and 1.1±0.8 μg/mL after 3 and 7 days, respectively. 39.9%±6.0% of BQ123 was still present in the polymer depot at t=7 days. CONCLUSIONS The results show that an intravitreal injection of this drug delivery system leads to a prolonged vasodilative response and a BQ123 release over 7 days, suggesting its therapeutic potential in the management of retinal ischemic conditions.

Injectable formulations for an intravitreal sustained-release application of a novel single-chain VEGF antibody fragment

Sustained-release formulations of a single-chain anti-VEGF-A antibody fragment were investigated in vitro toward their potential use for intravitreal applications. The hydrophobic polyester hexylsubstituted poly(lactic acid) (hexPLA) was selected as the sustained-release excipient for its biodegradability and semi-solid aggregate state, allowing an easy and mild formulation procedure. The lyophilized antibody fragment ESBA903 was micronized and incorporated into the liquid polymer matrix by cryo-milling, forming homogeneous and injectable suspensions. The protein showed excellent compatibility with the hexPLA polymer and storage stability at 4°C for 10 weeks. Additionally, hexPLA shielded the incorporated active substance from the surrounding medium, resulting in a better stability of ESBA903 inside the polymer than after its release in the buffer solution. Formulations of ESBA903 with hexPLA having drug loadings between 1.25% and 5.0% and polymer molecular weights of 1500 g/mol, 2500 g/mol, 3500 g/mol and 5000 g/mol were investigated regarding their in vitro release. All formulations except with the highest molecular weight formed spherical depots in aqueous buffer solutions and released the antibody fragment for at least 6-14 weeks. The polymer viscosity derived from the molecular weight strongly influenced the release rate, while the drug loading had minor influence, allowing customization of the release profile and the daily drug release. Size exclusion chromatography and SDS-PAGE revealed that the antibody fragment structure was kept intact during incorporation and release from the liquid matrix. Furthermore, the released protein monomer maintained its high affinity to human VEGF-A, as measured by surface plasmon resonance analysis. Formulations of ESBA903 in hexPLA meet the basic needs to be used for intravitreal sustained-release applications in age-related macular degeneration treatment.