Luyuan Zhang

Metal Oxide Gas Sensors: Sensitivity and Influencing Factors

Conductometric semiconducting metal oxide gas sensors have been widely used and investigated in the detection of gases. Investigations have indicated that the gas sensing process is strongly related to surface reactions, so one of the important parameters of gas sensors, the sensitivity of the metal oxide based materials, will change with the factors influencing the surface reactions, such as chemical components, surface-modification and microstructures of sensing layers, temperature and humidity. In this brief review, attention will be focused on changes of sensitivity of conductometric semiconducting metal oxide gas sensors due to the five factors mentioned above.

Large scale synthesis and gas-sensing properties of anatase TiO2 three-dimensional hierarchical nanostructures.

Three-dimensional (3D) crystalline anatase titanium dioxide (TiO(2)) hierarchical nanostructures were synthesized through a facile and controlled hydrothermal and after-annealing process. The formation mechanism for the anatase TiO(2) 3D hierarchical nanostructures was investigated in detail. The 3D hierarchical nanostructures morphologies are formed by self-organization of several tens of radially distributed thin petals with a thickness of several nanometers with a larger surface area. The surface area of TiO(2) hierarchical nanostructures determined by the Brunauer-Emmett-Teller (BET) adsorption isotherms was measured to be 64.8 m(2) g(-1). Gas sensing properties based on the hierarchical nanostructures were investigated. A systematic study on sensitivity as a function of temperatures and gas concentrations was carried out. It reveals an improved ethanol gas sensing response property with a sensitivity of about 6.4 at 350 degrees C upon exposure to 100 ppm ethanol vapor for the TiO(2) hierarchical nanostructures. A gas sensing mechanism based on the adsorption-desorption of oxygen on the surface of TiO(2) is discussed and analyzed. This novel gas sensor can be multifunctional and promising for practical applications. Furthermore, the hierarchical nanostructures with high surface area can find variety of potential applications such as solar cells, biosensors, catalysts, etc.

Sol-gel growth of hexagonal faceted ZnO prism quantum dots with polar surfaces for enhanced photocatalytic activity.

The hexagonal faceted ZnO quantum dots (QDs) about 3-4 nm have been prepared via a sol-gel route by using oleic acid (OA) as the capping agent. It is revealed by electron diffraction patterns and high resolution transmission electron microscopy lattice images that the profile surfaces of the highly crystalline ZnO QDs are mainly composed of {100} planes, with the Zn-terminated (001) faces and the opposite (001) faces presented as polar planes. Compared with spherical ZnO QDs, the hexagonal faceted ZnO QDs show enhanced photocatalytic activity for photocatalytic decomposition of methylene blue. A mechanism for the enhanced photocatalytic activity of the hexagonal faceted ZnO QDs for degradation of methylene blue is proposed. In addition to the large specific surface areas due to small size and high crystalline, the enhanced photocatalytic activity can mainly be ascribed to the special hexagonal morphology. The Zn-terminated (001) and O-terminated (001) polar faces are facile to adsorb oxygen molecules and OH(-) ions, resulting in a greater production rate of H(2)O(2) and OH(*) radicals, hence promoting the photocatalysis reaction. The synthesized hexagonal-shaped ZnO QDs with high photocatalytic efficiency will find widespread potential applications in environmental and biological fields.

Platinum-Nanoparticle-Modified TiO2 Nanowires with Enhanced Photocatalytic Property

Highly crystalline Pt nanoparticles with an average diameter of 5 nm were homogeneously modified on the surfaces of TiO(2) nanowires (Pt-TiO(2) NWs) by a simple hydrothermal and chemical reduction route. Photodegradation of methylene blue (MB) in the presence of Pt-TiO(2) NWs indicates that the photocatalytic activity of TiO(2) NWs can be greatly enhanced by Pt nanoparticle modification. The physical chemistry process and photocatalytic mechanism for Pt-TiO(2) NWs hybrids degrading MB were investigated and analyzed. The Pt attached on TiO(2) nanowires induces formation of a Schottky barrier between TiO(2) and Pt naonoparticles, leading to a fast transport of photogenerated electrons to Pt particles. Furthermore, Pt incoporation on TiO(2) surface can accelerate the transfer of electrons to dissolved oxygen molecules. Besides enhancing the electron-hole separation and charge transfer to dissolved oxygen, Pt may also serve as an effective catalyst in the oxidation of MB. However, a high Pt loading value does not mean a high photocatalytic activity. Higher content loaded Pt nanoparticles can absorb more incident photons which do not contribute to the photocatalytic efficiency. The highest photocatalytic activity for the Pt-TiO(2) nanohybrids on MB can be obtained at 1 at % Pt loading.

Cu2ZnSnS4 Nanoparticle Sensitized Metal–Organic Framework Derived Mesoporous TiO2 as Photoanodes for High-Performance Dye-Sensitized Solar Cells

We present a facile hot injection and hydrothermal method to synthesize Cu2ZnSnS4 (CZTS) nanoparticles sensitized metal-organic frameworks (MOFs)-derived mesoporous TiO2. The MOFs-derived TiO2 inherits the large specific surface area and abundantly porous structures of the MOFs structure, which is of great benefit to effectively enhance the dye loading capacity, prolong the incident light traveling length by enhancing the multiple interparticle light-scattering process, and therefore improve the light absorption capacity. The sensitization of CZTS nanoparticles effectively enlarges the photoresponse range of TiO2 to the visible light region and facilitates photoinduced carrier transport. The formed heterostructure between CZTS nanoparticles and MOFs-derived TiO2 with matched band gap structure effectively suppresses the recombination rates of photogenerated electron/hole pairs and prolongs the lifespan of the carriers. Photoanodes based upon CZTS/MOFs-derived TiO2 photoanodes can achieve the maximal photocurrent of 17.27 mA cm(-2) and photoelectric conversion performance of 8.10%, nearly 1.93 and 2.21 times higher than those of TiO2-based photoanode. The related mechanism and model are investigated. The strikingly improved photoelectric properties are ascribed to a synergistic action between the MOFs-derived TiO2 and the sensitization of CZTS nanoparticles.

Surface passivation engineering strategy to fully-inorganic cubic CsPbI 3 perovskites for high-performance solar cells

Owing to inevitable thermal/moisture instability for organic–inorganic hybrid perovskites, pure inorganic perovskite cesium lead halides with both inherent stability and prominent photovoltaic performance have become research hotspots as a promising candidate for commercial perovskite solar cells. However, it is still a serious challenge to synthesize desired cubic cesium lead iodides (CsPbI3) with superior photovoltaic performance for its thermodynamically metastable characteristics. Herein, polymer poly-vinylpyrrolidone (PVP)-induced surface passivation engineering is reported to synthesize extra-long-term stable cubic CsPbI3. It is revealed that acylamino groups of PVP induce electron cloud density enhancement on the surface of CsPbI3, thus lowering surface energy, conducive to stabilize cubic CsPbI3 even in micrometer scale. The cubic-CsPbI3 PSCs exhibit extra-long carrier diffusion length (over 1.5 μm), highest power conversion efficiency of 10.74% and excellent thermal/moisture stability. This result provides important progress towards understanding of phase stability in realization of large-scale preparations of efficient and stable inorganic PSCs.Inorganic cesium lead iodide perovskite is inherently more stable than the hybrid perovskites but it undergoes phase transition that degrades the solar cell performance. Here Li et al. stabilize it with poly-vinylpyrrolidone and obtain high efficiency of 10.74% with excellent thermal and moisture stability.

Mesoporous Hollow Sb/ZnS@C Core-Shell Heterostructures as Anodes for High-Performance Sodium-Ion Batteries

Combining the advantage of metal, metal sulfide, and carbon, mesoporous hollow core-shell Sb/ZnS@C hybrid heterostructures composed of Sb/ZnS inner core and carbon outer shell are rationally designed based on a robust template of ZnS nanosphere, as anodes for high-performance sodium-ion batteries (SIBs). A partial cation exchange reaction based on the solubility difference between Sb2 S3 and ZnS can transform mesoporous ZnS to Sb2 S3 /ZnS heterostructure. To get a stable structure, a thin contiguous resorcinol-formaldehyde (RF) layer is introduced on the surface of Sb2 S3 /ZnS heterostructure. The effectively protective carbon layer from RF can be designed as the reducing agent to convert Sb2 S3 to metallic Sb to obtain core-shell Sb/ZnS@C hybrid heterostructures. Simultaneously, the carbon outer shell is beneficial to the charge transfer kinetics, and can maintain the structure stability during the repeated sodiation/desodiation process. Owing to its unique stable architecture and synergistic effects between the components, the core-shell porous Sb/ZnS@C hybrid heterostructure SIB anode shows a high reversible capacity, good rate capability, and excellent cycling stability by turning the optimized voltage range. This novel strategy to prepare carbon-layer-protected metal/metal sulfide core-shell heterostructure can be further extended to design other novel nanostructured systems for high-performance energy storage devices.

Simulations of depleted CMOS sensors for high-radiation environments

After the Phase II upgrade for the Large Hadron Collider (LHC), the increased luminosity requests a new upgraded Inner Tracker (ITk) for the ATLAS experiment. As a possible option for the ATLAS ITk, a new pixel detector based on High Voltage/High Resistivity CMOS (HV/HR CMOS) technology is under study. Meanwhile, a new CMOS pixel sensor is also under development for the tracker of Circular Electron Position Collider (CEPC). In order to explore the sensor electric properties, such as the breakdown voltage and charge collection efficiency, 2D/3D Technology Computer Aided Design (TCAD) simulations have been performed carefully for the above mentioned both of prototypes. In this paper, the guard-ring simulation for a HV/HR CMOS sensor developed for the ATLAS ITk and the charge collection efficiency simulation for a CMOS sensor explored for the CEPC tracker will be discussed in details. Some comparisons between the simulations and the latest measurements will also be addressed.

A fluorine-modulated bulk-phase heterojunction and tolerance factor for enhanced performance and structure stability of cesium lead halide perovskite solar cells

Although significant progress has been made on the performance of inorganic–organic perovskite solar cells (PSCs), the commercialization of these PSCs is seriously hampered by their poor thermal/moisture stability. Inorganic cesium-based perovskites with relatively high phase stability are ideal alternatives although they still suffer from low photoelectrical conversion efficiency (PCE). Herein, for the first time, fluorine (F) was introduced into the X-site of ABX3 to modulate bulk-phase heterostructures and tolerance factors of inorganic CsPbBrI2−xFx with significantly enhanced PCE and stability. The α-/δ-phase heterojunction is beneficial for efficient dissociation of excitons and charge transport driven by the matched energy band offsets. The lifetime of charge carriers is prolonged due to the retarded charge recombination, which is evidenced by time resolved photoluminescence results; this results in improved short-circuit current density (JSC). In view of the Goldschmidt tolerance factor, partial substitution of iodine by fluorine (with a smaller ionic radius) in the ABX3 structure enlarges the inadequate index to stabilize the α-CsPbBrI2 structure. The CsPbBrI1.78F0.22 PSC with an optimized α-/δ-phase heterostructure displays a superior PCE of up to 10.26% and structural stability against moisture and time. This study sets up a new avenue for designing high-performance PSCs for potential industrial applications.

Investigation of CMOS pixel sensor with 0.18 μm CMOS technology for high-precision tracking detector

The Circular Electron Positron Collider (CEPC) proposed by the Chinese high energy physics community is aiming to measure Higgs particles and their interactions precisely. The tracking detector including Silicon Inner Tracker (SIT) and Forward Tracking Disks (FTD) has driven stringent requirements on sensor technologies in term of spatial resolution, power consumption and readout speed. CMOS Pixel Sensor (CPS) is a promising candidate to approach these requirements. This paper presents the preliminary studies on the sensor optimization for tracking detector to achieve high collection efficiency while keeping necessary spatial resolution. Detailed studies have been performed on the charge collection using a 0.18 μm CMOS image sensor process. This process allows high resistivity epitaxial layer, leading to a significant improvement on the charge collection and therefore improving the radiation tolerance. Together with the simulation results, the first exploratory prototype has bee designed and fabricated. The prototype includes 9 different pixel arrays, which vary in terms of pixel pitch, diode size and geometry. The total area of the prototype amounts to 2 × 7.88 mm2.