M. Alovisi

Root Canal Anatomy Preservation of WaveOne Reciprocating Files with or without Glide Path

INTRODUCTION This study evaluated the influence of glide path on canal curvature and axis modification after instrumentation with WaveOne Primary reciprocating files. METHODS Thirty ISO 15, 0.02 taper Endo Training Blocks were used. In group 1, glide path was created with PathFile 1, 2, and 3 at working length, whereas in group 2, glide path was not performed. In both groups, canals were shaped with WaveOne Primary reciprocating files at working length. Preinstrumentation and postinstrumentation digital images were superimposed and processed with Matlab r2010b software to analyze the curvature radius ratio (CRr) and the relative axis error (rAe), representing canal curvature modification. Data were analyzed with 1-way balanced analyses of variance at 2 levels (P < .05). RESULTS Glide path was found to be extremely significant for both CRr parameter (F = 9.59; df = 1; P = .004) and rAe parameter (F = 13.55; df = 1; P = .001). CONCLUSIONS Canal modifications seem to be significantly reduced when previous glide path is performed by using the new WaveOne nickel-titanium single-file system.

Association among oral health, apical periodontitis, CD14 polymorphisms, and coronary heart disease in middle-aged adults.

INTRODUCTION There is evidence to suggest that an association exists between oral infections and coronary heart disease (CHD). Subjects presenting lesions of endodontic origin (LEOs) or pulpal inflammation had an increased risk of developing CHD. However, findings concerning systemic manifestations of apical periodontitis (AP) remain controversial. An association between CD14 gene polymorphisms and atherosclerosis-associated diseases has been shown, but there are no data regarding an association between CD14 polymorphism and AP. This study evaluated associations between clinical oral health status, CD14 polymorphisms, and CHD. METHODS A case-controlled clinical trial was designed to compare middle-aged adults with acute myocardial infarction or unstable angina (n = 51) within 12 months of the acute event defined as first manifestation with healthy controls (n = 49). Participants were matched for age, sex, and socioeconomic status. Indicators of oral disease and compliance were evaluated. CD14 polymorphisms were analyzed by restriction fragment length polymorphism-polymerase chain reaction. RESULTS CHD subjects had a higher prevalence of oral diseases and lower compliance to oral preventive strategies than healthy controls. Multivariate analysis showed a positive association between missing teeth (odds ratio [OR] = 1.37; 95% confidence interval [CI], 1.02-1.85), the number of LEOs (OR = 4.37; 95% CI, 1.69-11.28), chronic periodontitis (OR = 5.87; 95% CI, 1.17-29.4), and CHD. No statistically significant association emerged between the CD14 C(-260)T and the CD14 C(-159)T polymorphism, endodontic or periodontal disease, and CHD. CONCLUSIONS Chronic oral diseases may increase the risk of CHD and may be an unconventional risk factor for CHD.

Energy Consumption of ProTaper Next X1 after Glide Path with PathFiles and ProGlider

INTRODUCTION Instrument failure caused by excessive torsional stress can be controlled by creating a manual or mechanical glide path. The ProGlider single-file system (Dentsply Maillefer, Ballaigues, Switzerland) was recently introduced to perform a mechanical glide path. This study was designed to compare the effect of a glide path performed with PathFiles (Dentsply Maillefer) and ProGlider on torque, time, and pecking motion required for ProTaper Next X1 (Dentsply Maillefer) to reach the full working length in simulated root canals. METHODS Forty Endo Training Blocks (Dentsply Maillefer) were used. Twenty were prepared with a mechanical glide path using PathFiles 1 and 2 (the PathFile group), and 20 were prepared with a mechanical glide path using a ProGlider single file (the ProGlider group). All samples were shaped with ProTaper Next X1 driven by an endodontic motor connected to a digital wattmeter. The required torque for root canal instrumentation was analyzed by evaluating the electrical power consumption of the endodontic engine. Electric power consumption (mW/h), elapsed time (seconds), and number of pecking motions required to reach the full working length with ProTaper Next X1 were calculated. Differences among groups were analyzed with the parametric Student t test for independent data (P < .05). RESULTS Elapsed time and electric power consumption were significantly different between groups (P = .0001 for both). ProGlider appears to perform more efficiently than PathFiles in decreasing electric power consumption of ProTaper Next X1 to reach the full working length. CONCLUSIONS This study confirmed the ability of ProGlider to reduce stress in ProTaper Next X1 during shaping through a glide path and preliminary middle and coronal preflaring.

Microleakage at enamel and dentin margins with a bulk fills flowable resin

Objective: The aim of this in vitro study was to evaluate the marginal sealing ability of a bulk fill flowable resin composite on both enamel and dentin substrates. Materials and Methods: 48 non-carious molars were selected and four Class-V cavities were prepared at the CEJ of each sample. Cavities were filled with Venus Diamond (Heraeus Kulzer); Venus Diamond Flow (Heraeus Kulzer) and Surefil SDR (Dentsply). Samples were divided into two groups: First group samples were immersed in a methylene blue solution for 30 min at 25°C. Second group samples were artificially aged and then treated with methylene blue. Samples were sectioned in the center of the restoration and observed with a 40x stereomicroscope, and the percentage of cavity infiltration was calculated. Results: Results were analyzed statistically by ANOVA (P < 0.05). The amount of infiltration was significantly lower for the enamel substrate compared with dentin (P = 0.0001) and in samples immediately immersed in methylene blue compared with those that were artificially aged (P = 0.011). The interaction between the composite material and the marginal substrate significantly affected dye penetration (P = 0.006). Conclusions: Bulk fill flowable resins provided significantly better marginal seal in dentin, both before and after artificial ageing. Nanohybrid resin composites and bulk fill flowable resins showed similar microleakage values at enamel margins. Bulk fills flowable resins provided significantly better marginal seal in dentin, both before and after artificial ageing. Nanohybrid resin composites and bulk fill flowable resins showed similar microleakage values at enamel margins.

Is fracture resistance of endodontically treated mandibular molars restored with indirect onlay composite restorations influenced by fibre post insertion

OBJECTIVES The aim of this study was to investigate the influence of post placement on fracture resistance of endodontically treated mandibular molars restored with adhesive overlay restorations. METHODS Endodontically treated human molars with two- and one-wall cavities either underwent or did not undergo fibre post insertion within composite build-up before cementation of indirect composite onlay restorations. The specimens were thermocycled, exposed to cyclic loading, and submitted to the static fracture resistance test. Fracture loads and mode of failure were evaluated. RESULTS Statistical analysis revealed that specimens with fibre posts demonstrated similar failure loads (p=0.065) but more favourable fracture patterns compared with specimens without fibre posts. No difference was found between two- and one-wall cavities. CONCLUSIONS Within the limitations of this study, the insertion of fibre posts did not improve support under indirect composite overlays. CLINICAL SIGNIFICANCE When restoring heavily broken down endodontically treated mandibular molars with an indirect overlay composite restoration, the fibre post inserted within the composite build-up do not provide any increase in fracture resistance.

Longevity of class 2 direct restorations in root-filled teeth: A retrospective clinical study

OBJECTIVES To evaluate retrospectively the longevity of endodontically treated teeth restored with direct resin composite without cusp coverage, with or without the insertion of fibre posts. The null hypothesis was that direct restorations with fibre posts perform better than those without fibre posts. METHODS Patients recruited for this study were treated in the Department of Cariology and Operative Dentistry, University of Turin, between 2008 and 2011. In total, 247 patients with 376 root treated posterior teeth, restored with direct resin composite, were recalled for a control visit. Only second-class cavities were considered. Two groups were defined based on the absence (Group A) or presence (Group B) of fibre post. Failures and complications, such as periodontal failure, endodontic failure, tooth extraction, root fracture, post fracture, post debonding, replacement of restoration, crown displacement, and coronal-tooth fracture, were noted. Functional restoration quality was evaluated following the modified USPHS criteria. Data were evaluated statistically with ANOVA. RESULTS Group A consisted of 128 patients with 178 restorations (88 premolars, 90 molars) with a median follow-up of 34.44 months. Group B consisted of 119 patients with 198 teeth (92 premolars, 106 molars) with a median follow-up of 35.37 months. Direct restorations with fibre posts were statistically significantly more functional (95.12% success) than those without fibre posts (80% success) because of less marginal discolouration, better marginal integrity, and higher restoration integrity. CONCLUSIONS The null hypothesis was accepted because direct post-endodontic restorations with fibre posts performed better than restorations without posts after 3 years of masticatory function. CLINICAL SIGNIFICANCE An evaluation of the longevity of post endodontic direct restoration would seem to enhance the fiber post insertion within a composite restoration to reduce clinical failures.

Atypical facial pain related to apical fenestration and overfilling.

AIM To report a case of apical fenestration and overfilling in which unusual pain characteristics made differential diagnosis challenging. SUMMARY A 32-year-old woman with diffuse, spontaneous, moderate pain in the maxillary left posterior sector, exacerbated by masticatory and facial muscle movement, with intense sporadic electric-shooting pain, underwent clinical examination and 3D cone beam computed tomography (CBCT). Apical fenestration with protrusion of the mesial root of tooth 26 beyond the buccal cortical plate, extrusion of canal filling material into the soft tissues and a periosteal reaction were detected. Surgery was performed under the operating microscope. The filling material and surrounding fibrous tissue were located, dissected from healthy soft tissues and removed. The mesiobuccal root apex was resected with a bur to within the bony crypt. A root end was prepared and filled with Tech Biosealer RootEnd™ (Isasan, Como, Italy). At the 2-week recall, the patient had complete resolution of the symptoms and good soft-tissue healing. The 1-year recall examination and intra-oral radiography confirmed complete resolution of the symptoms and health of periradicular tissues. KEY LEARNING POINTS Apical fenestration may occur in 9% of cases and may be considered an anatomic predisposing factor for persistent pain after root canal treatment. This complication provides a considerable differential diagnostic challenge and is often misdiagnosed and mistreated. When correctly diagnosed through an accurate, multidisciplinary approach, it may be managed with a simple surgical procedure in which the endodontist should play a key role. Misdiagnosis and over treatment of apical fenestration, through the surgical management of chronic facial pain conditions, could lead to severe exacerbation of chronic pain, which may potentially become persistent or, indeed, intractable.

Evaluation of a Simplified Fiber Post Removal System

INTRODUCTION This study investigated the influence of clinical experience in relation to the efficacy and effectiveness of removal of 2 different fiber posts. METHODS In total, 48 intact single-rooted teeth were treated endodontically and obturated. Then, 10-mm post spaces were prepared, and fiber posts were luted. Twenty-four #1 D.T. Light-Posts were used in group 1, and 24 #2 Hi-Rem Prosthetic Posts were used in group 2. A pullout test (n = 8 per group) was performed by using a universal testing machine to compare bond strength. Then, fiber post removal efficacy and efficiency were tested. Each group was divided into 2 subgroups (n = 8) according to operator experience. In group 1, fiber posts were removed with an ultrasonic handpiece by using a #3 Start-X tip. In group 2, a size 25/0.04 ProFile was used to remove the central soft polymer macrofiber, and a #2 Largo drill was used to remove the fiber post and luting cement remnants. Post removal times were recorded to evaluate efficacy. Weight change was determined, and post space walls were analyzed microscopically to evaluate effectiveness. RESULTS Bond strength did not differ significantly (P = .7569) between post systems. Post hoc Tukey tests indicated that removal time was affected significantly by operator experience in group 1 (P < .001) but not in group 2. Weight change was affected significantly by experience level in both groups. No difference in post space wall characteristics was observed between subgroups. CONCLUSIONS The Hi-Rem post was easier to remove than the D.T Light-Post.

Prediction of Cyclic Fatigue Life of Nickel-Titanium Rotary Files by Virtual Modeling and Finite Elements Analysis

INTRODUCTION The finite element method (FEM) has been proposed as a method to analyze stress distribution in nickel-titanium (NiTi) rotary instruments but has not been assessed as a method of predicting the number of cycles to failure (NCF). The objective of this study was to predict NCF and failure location of NiTi rotary instruments by FEM virtual simulation of an experimental nonstatic fatigue test. METHODS ProTaper Next (PTN) X1, X2, and X3 files (Dentsply Maillefer, Baillagues, Switzerland) (n = 20 each) were tested to failure using a customized fatigue testing device. The device and file geometries were replicated with computer-aided design software. Computer-aided design geometries (geometric model) were imported and discretized (numeric model). The typical material model of an M-Wire alloy was applied. The numeric model of the device and file geometries were exported for finite element analysis (FEA). Multiaxial random fatigue methodology was used to analyze stress history and predict instrument life. Experimental data from PTN X2 and X3 were used for virtual model tuning through a reverse engineering approach to optimize material mechanical properties. Tuned material parameters were used to predict the average NCF and failure locations of PTN X1 by FEA; t tests were used to compare FEA and experimental findings (P < .05). RESULTS Experimental NCF and failure locations did not differ from those predicted with FEA (P = .098). CONCLUSIONS File NCF and failure location may be predicted by FEA. Virtual design, testing, and analysis of file geometries could save considerable time and resources during instrument development.

Influence of Contracted Endodontic Access on Root Canal Geometry: An In Vitro Study

Introduction: Contracted endodontic cavities (CECs) have developed from the concept of minimally invasive dentistry and provide an alternative to traditional endodontic cavities (TECs). They have been designed in an effort to preserve the mechanical stability of teeth. The contracted cavity design preserves more of the dentin but may influence the geometric shaping parameters. The aim of this micro–computed tomographic study was to evaluate the influence of contracted endodontic cavities on the preservation of the original root canal anatomy after shaping with nickel‐titanium rotary instruments. Methods: Thirty extracted human mandibular molars with fully formed apices and independent mesial canals were randomly assigned to group 1 (TEC) and group 2 (CEC). Each group was shaped using ProGlider (Dentsply Maillefer, Ballaigues, Switzerland) and WaveOne Gold (Dentsply Maillefer). Irrigation was performed with 10% EDTA and 5% sodium hypochlorite. Samples were scanned before and after canal shaping to match canal volumes (SkyScan; Bruker microCT, Kontich, Belgium [100 kV, 100 &mgr;A, and 15‐&mgr;m resolution]), and images were analyzed to evaluate canal volumes, surface areas, and centroid shift on cross sections at −1 mm and −3 mm from the apex. Results: TECs showed a greater preservation of the original root canal anatomy with less apical transportation than CECs, possibly because of the absence of coronal interferences and, therefore, fewer pecking motions required to complete instrumentation. Conclusions: Within the limitations of this study, TECs may lead to a better preservation of the original canal anatomy during shaping compared with CECs, particularly at the apical level. HighlightsThe contracted endodontic access group showed a higher number of pecking motions required to reach the working length.The centroid shift in the contracted endodontic cavity group was higher than in the traditional endodontic cavity group at the apical level.A traditional endodontic access may be suggested to preserve the original root canal anatomy during shaping.