M. Consales

A Novel Optochemical Sensor Based on

In this paper, a fiber optic sensing system, designed, and developed for the detection of ammonia in aqueous ambient at room temperature, is presented. The sensor is constituted by a standard silica optical fiber (SOF) coated by a tin dioxide sensitive layer. The SnO2 films have been transferred onto the distal end of the SOF by means of the simple and low-cost electrostatic-spray-pyrolysis deposition technique. The spectral characterization of the fabricated samples has been carried out in the wavelength range 400-1750 nm in order to estimate the thickness of the SnO2 fiber coatings. The morphology and the elemental composition of the deposited layers have also been investigated by means of scanning-electron-microscopy observation and energy-dispersive-spectrometer analysis, respectively. Single-wavelength reflectance measurements have been carried out to test the sensing performances of the realized sensors toward ammonia traces in water. A fiber-Bragg-grating temperature sensor has also been used for monitoring the temperature changes occurring inside the test ambient during the experimental measurements, in order to identify the effects of thermal drifts on the sensor response. The results here presented demonstrate that the developed refractometric chemical sensor is able to provide measurements of ammonia concentration in water and at room temperature with a high sensitivity, response times of few minutes, and a resolution as low as 2 ppm

\hbox{SnO}_{2}

We report an innovative fiber optic nano-optrode based on Long Period Gratings (LPGs) working in reflection mode for the detection of human Thyroglobulin (TG), a protein marker of differentiated thyroid cancer. The reflection-type LPG (RT-LPG) biosensor, coated with a single layer of atactic polystyrene (aPS) onto which a specific, high affinity anti-Tg antibody was adsorbed, allowed the label-free detection of Tg in the needle washouts of fine-needle aspiration biopsies, at concentrations useful for pre- and post-operative assessment of the biomarker levels. Analyte recognition and capture were confirmed with a parallel on fiber ELISA-like assay using, in pilot tests, the biotinylated protein and HRP-labeled streptavidin for its detection. Dose-dependent experiments showed that the detection is linearly dependent on concentration within the range between 0 and 4 ng/mL, while antibody saturation occurs for higher protein levels. The system is characterized by a very high sensitivity and specificity allowing the ex-vivo detection of sub ng/ml concentrations of human Tg from needle washouts of fine-needle aspiration biopsies of thyroid nodule from different patients.

Sensitive Thin Film for ppm Ammonia Detection in Liquid Environment

The authors investigate the sensing properties of single-walled carbon nanotubes (SWCNTs) films, which are used as nanostructured materials for chemical sensors onto three types of transducers using different principles of operation as surface acoustic waves (SAWs), quartz-crystal microbalance (QCM), and a standard silica optical fiber (SOF) for detection of volatile organic compounds at a room temperature. The sensing probes have been configured as 315- and 433-MHz SAW two-port resonator-based oscillator, 10-MHz QCM resonator, and SOF light-reflectometry-based system at a wavelength of 1310 nm. A nanocomposite film of SWCNTs embedded in a cadmium-arachidate matrix was deposited by Langmuir-Blodgett (LB) technique onto the SAW sensors. An LB multilayer of SWCNTs-onto-CdA buffer material was also deposited onto the QCM and SOF sensors. The experiments demonstrate that carbon-nanotubes acoustic and optical sensors are highly sensitive to a wide range of polar and nonpolar organic solvents up to a sub-ppm detection limit at a room temperature

Long period fiber grating nano-optrode for cancer biomarker detection

In this letter, the possibility to use single-walled carbon nanotubes (SWCNTs) as sensitive nanostructured material for the development of an optoelectronic sensor that can perform chemical detection in water has been investigated and demonstrated for the first time. The fabricated sensor has been employed in a reflectometric system involving single wavelength reflectance measurements. The good stability of the steady-state signal, the high sensitivity, as well as the good response dynamics obtained in the case of toluene detection confirm the potentiality of SWCNTs to be employed in a water environment.

Acoustic and Optical VOCs Sensors Incorporating Carbon Nanotubes

This work is focused on the room temperature sensitivities and response times analysis against aromatic volatile organic compounds of both silica optical fiber and quartz crystal microbalance sensors, coated by single-walled carbon nanotubes (SWCNTs) Langmuir-Blodgett multilayers as highly sensitive nanomaterials. The fabricated samples have been characterized by means of X-ray diffraction, high-resolution transmission electron microscopy and scanning electron microscopy, silica optical fiber, and quartz crystal microbalance transducers have been simultaneously exposed at room temperature to toluene and xylene individual vapors in the ppm range. For each transducer type, a time division multiplexing approach has been exploited, enabling the simultaneous interrogation of up to 8 optical and 6 acoustic probes, respectively. The results obtained indicate that both optical and acoustic sensors provide very high reproducibility and sensitivity either towards toluene or xylene, with a resolution of few hundreds of ppb. Furthermore, sensitivities and response times turned out to be dependent on the particular analytes used for the vapors testing. Both transducer types demonstrate a similar response time, while with regard the recovery time, the optical detection seems to be significantly faster than the electrical counterpart. The effect of the SWCNTs monolayers number on sensors sensitivity and response time has also been investigated, demonstrating the possibility to enhance the performances of the proposed transducers by tailoring the geometric properties of the sensitive nanomaterial.

Chemical Detection in Water by Single-Walled Carbon Nanotubes-Based Optical Fiber Sensors

In this letter, preliminary results on the feasibility to use optical fiber sensors coated by single-walled carbon nanotubes (SWCNTs)-based sensitive materials for hydrogen detection at cryogenic temperatures are presented. The optical probes have been realized by the Langmuir-Blodgett deposition of close-end and open-end SWCNTs on the distal end of standard optical fibers. The results obtained from hydrogen detection testing, carried out at a temperature as low as 113K, demonstrate the excellent potentiality of the proposed configuration to sense very low percentages of gaseous hydrogen (<5%), with good recovery and reversibility features as well as fast response times.

Carbon Nanotubes Coated Acoustic and Optical VOCs Sensors: Towards the Tailoring of the Sensing Performances

In this paper, we report on recent experimental results obtained with fiber-Bragg-grating (FBG) hydrophones for underwater acoustic detection. The optical hydrophones under investigation consist of FBGs coated with ring-shaped polymers of different size and mechanical properties. The coating materials were selected and designed in order to provide mechanical amplification, via judicious choice of their acousto-mechanical properties and by exploiting selected resonances occurring in different frequency ranges. Our underwater acoustic measurements, carried out within the range 4–35 kHz, reveal the resonant behavior of these optical hydrophones, as well as its dependence on the coating size and type of material. These experimental data are also in good agreement with our previously published numerical results. By comparison with bare (i.e., uncoated) FBGs, responsivity enhancements of up to three orders of magnitude were found, demonstrating the effectiveness of polymeric coatings in tailoring the acoustic response of FBG-based hydrophones.

Optical probes based on optical fibers and single-walled carbon nanotubes for hydrogen detection at cryogenic temperatures

In this contribution, a review of the development of high-performance optochemical nanosensors based on the integration of carbon nanotubes with the optical fiber technology is presented. The paper first provide an overview of the amazing features of carbon nanotubes and their exploitation as highly adsorbent nanoscale materials for gas sensing applications. Successively, the attention is focused on the operating principle, fabrication, and characterization of fiber optic chemosensors in the Fabry-Perot type reflectometric configuration, realized by means of the deposition of a thin layer of single-walled carbon nanotubes (SWCNTs) upon the distal end of standard silica optical fibers. This is followed by an extensive review of the excellent sensing capabilities of the realized SWCNTs-based chemical nanosensors against volatile organic compounds and other pollutants in different environments (air and water) and operating conditions (room temperature and cryogenic temperatures). The experimental results reported here reveal that ppm and sub-ppm chemical detection limits, low response times, as well as fast and complete recovery of the sensor responses have been obtained in most of the investigated cases. This evidences the great potentialities of the proposed photonic nanosensors based on SWCNTs to be successfully employed for practical environmental monitoring applications both in liquid and vapor phase as well as for space. Furthermore, the use of novel SWCNTs-based composites as sensitive fiber coatings is proposed to enhance the sensing performance and to improve the adhesion of carbon nanotubes to the fiber surface. Finally, new advanced sensing configurations based on the use of hollow-core optical fibers coated and partially filled by carbon nanotubes are also presented.

Resonant Hydrophones Based on Coated Fiber Bragg Gratings

In this letter, the feasibility of using hollow-core optical fibers (HOFs) integrated with carbon nanotubes for volatile organic compound (VOC) detection applications has been investigated. The Langmuir-Blodgett technique has been used in order to transfer single walled carbon nanotubes (SWCNTs) onto HOFs. Reflectance characterization of the obtained sensing probes has been carried out in the range 1520-1620 nm. Finally, the sensing capability of the HOF sensors has been investigated by exposure in a test chamber to traces of tetrahydrofuran. The preliminary results obtained demonstrate the capability of the novel HOF sensor to perform chemical detection of VOCs showing a good sensitivity and fast response times

Fiber Optic Chemical Nanosensors Based on Engineered Single-Walled Carbon Nanotubes

In this letter, experimental results on the capability of a tin dioxide (SnO2)-based silica optical fiber (SOF) sensor to detect sub-ppm ammonia concentrations in water environments, at room temperature, are presented. SnO2 sensitive layers have been deposited on the fiber end by using the simple and low cost electrostatic spray pyrolysis deposition technique. The surface morphology of the deposited SnO2 layers as well as its influence on the near field profile of the emergent electromagnetic field from the fiber coating have been investigated by means of atomic force microscopy and scanning near field optical microscopy. The room temperature adsorption measurements reveal the excellent sensor resolution of 80ppb, good recovery features, high repeatability, and fast response times (a few minutes). The results obtained demonstrate the strong potentiality of the proposed SnO2-based SOF sensor to be employed for water quality monitoring applications.