M. Eugenia Pérez-Ojeda

New 8‐Amino‐BODIPY Derivatives: Surpassing Laser Dyes at Blue‐Edge Wavelengths

The development of highly efficient and stable blue-emitting dyes to overcome some of the most important shortcomings of available chromophores is of great technological importance for modern optical, analytical, electronic, and biological applications. Here, we report the design, synthesis and characterization of new tailor-made BODIPY dyes with efficient absorption and emission in the blue spectral region. The major challenge is the effective management of the electron-donor strength of the substitution pattern, in order to modulate the emission of these novel dyes over a wide spectral range (430-500 nm). A direct relationship between the electron-donor character of the substituent and the extension of the spectral hypsochromic shift is seen through the energy increase of the LUMO state. However, when the electron-donor character of the substituent is high enough, an intramolecular charge-transfer process appears to decrease the fluorescence ability of these dyes, especially in polar media. Some of the reported novel BODIPY dyes provide very high fluorescence quantum yields, close to unity, and large Stokes shifts, leading to highly efficient tunable dye lasers in the blue part of the spectrum; this so far remains an unexploited region with BODIPYs. In fact, under demanding transversal pumping conditions, the new dyes lase with unexpectedly high lasing efficiencies of up to 63 %, and also show high photostabilities, outperforming the laser action of other dyes considered as benchmarks in the same spectral region. Considering the easy synthetic protocol and the wide variety of possible substituents, we are confident that this strategy could be successfully extended for the development of efficient blue-edge emitting materials and devices, impelling biophotonic and optoelectronic applications.

Octakis(3‐azidopropyl)octasilsesquioxane: A Versatile Nanobuilding Block for the Efficient Preparation of Highly Functionalized Cube‐Octameric Polyhedral Oligosilsesquioxane Frameworks Through Click Assembly

A one-step synthesis of octakis(3-azidopropyl)octasilsesquioxane from commercially available octakis(3-aminopropyl)octasilsesquioxane has been developed through a highly efficient diazo-transfer reaction under very mild conditions. Nonaflyl azide is shown to be a safer, cheaper, and more efficient reagent for this transformation than the better known and generally used diazo-transfer reagent triflyl azide. Octakis(3-azidopropyl)octasilsesquioxane is an excellent nanobuilding block that can be readily octafunctionalized with a range of terminal alkynes by copper(I)-catalyzed 1,3-dipolar azide-alkyne cycloaddition to provide new functional nanocages, maintaining a perfect 3D cubic symmetry. The mildness, simplicity, and efficiency of this approach have been demonstrated in the preparation of a glyco-polyhedral oligosilsesquioxane (POSS) conjugate and a BODIPY-POSS cluster (BODIPY = boron dipyrromethene).

Controlled Click‐Assembly of Well‐Defined Hetero‐Bifunctional Cubic Silsesquioxanes and Their Application in Targeted Bioimaging

A general procedure for the assembly of hetero-bifunctional cubic silsesquioxanes with diverse functionality and a perfectly controlled distribution of functional groups on the inorganic framework has been developed. The method is based on a two-step sequence of mono- and hepta-functionalization through the ligand-accelerated copper(I)-catalyzed azide-alkyne cycloaddition of a readily available octaazido cubic silsesquioxane. The stoichiometry of the reactants and the law of binomial distribution essentially determine the selectivity of the key monofunctionalization reaction when a copper catalyst with strong donor ligands is used. The methodology has been applied to the preparation of a set of bifunctional nano-building-blocks with orthogonal reactivity for the controlled assembly of precisely defined hybrid nanomaterials and a fluorescent multivalent probe for application in targeted cell-imaging. The inorganic cage provides an improved photostability to the covalently attached dye as well as a convenient framework for the 3D multivalent display of the pendant epitopes. Thus, fluorescent bioprobes based on well-defined cubic silsesquioxanes offer interesting advantages over more conventional fully organic analogues and ill-defined hybrid nanoparticles and promise to become powerful tools for the study of cell biology and for biomedical applications.

Controlling Optical Properties and Function of BODIPY by Using Asymmetric Substitution Effects

Asymmetrically substituted BODIPY analogues of the dye PM567 have been synthesised from 2-acylpyrroles and pyrroles that bear indene, fluorene or difluorene units. The type of linkage between the fluorene and the BODIPY core plays an important role in the photophysics of the BODIPY chromophore. Indeed, an aliphatic bridge gives rise to an energy-transfer process between the chromophores, whereas a vinyl spacer allows an electronic interaction between them, leading to a large red shift of the spectral bands. The laser action of the new dyes has been analysed under transversal pumping at 10 Hz repetition rate, in both liquid phase and incorporated into solid polymeric matrices. Lasing efficiencies of up to 40% were reached with high photostabilities with the laser output remaining at the initial level after 1×10(5) pump pulses in the same position of the sample. The laser action of the new dyes outperforms the laser behaviour of commercial dyes that emit in the same spectral region. The replacement of fluorene by indene quenches the fluorescence and laser emission, but allows the development of an iron cation fluorescent sensor.

Click Assembly of Dye‐Functionalized Octasilsesquioxanes for Highly Efficient and Photostable Photonic Systems

New hybrid organic-inorganic dyes based on an azide-functionalized cubic octasilsesquioxane (POSS) as the inorganic part and a 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BDP) chromophore as the organic component have been synthesized by copper(I)-catalyzed 1,3-dipolar cycloaddition of azides to alkynes. We have studied the effects of the linkage group of BDP to the POSS unit and the degree of functionalization of this inorganic core on the ensuing optical properties by comparison with model dyes. The high fluorescence of the BDP dye is preserved in spite of the linked chain at its meso position, even after attaching one BDP moiety to the POSS core. The laser action of the new dyes has been analyzed under transversal pumping at 532 nm in both the liquid phase and when incorporated into solid polymeric matrices. The monosubstituted new hybrid dye exhibits high lasing efficiency of up to 56 % with high photostability, with its laser output remaining at the initial value after 4×10(5) pump pulses in the same position of the sample at a repetition rate of 30 Hz. However, functionalization of the POSS core with eight fluorophores leads to dye aggregation, as quantum mechanical simulation has revealed, worsening the optical properties and extinguishing the laser action. The new hybrid systems based on dye-linked POSS nanoparticles open up the possibility of using these new photonic materials as alternative sources for optoelectronic devices, competing with dendronized or grafted polymers.

Highly efficient and photostable photonic materials from diiodinated BODIPY laser dyes

Highly efficient and photostable laser parameters were observed for the diiodinated BODYPY derivatives 1 – 3 both in liquid phase and incorporated into polymeric matrices. The laser samples were transversely pumped at wavelengths near their absorption maxima (515 and 532 nm) at 5 mJ/pulse and 10 Hz repetition rate; these are conditions that would induce photodegrdation of many laser-active fluors. Under these extreme conditions, the new dyes exhibit laser action from 530 nm to 625 nm with remarkable efficiencies, up to 55% in liquid solutions and 45% in poly(methylmethacrylate), and with high photostability since the laser output remains at the initial level, with no sign of degradation, after 100000 pump pulses in the same position of the sample. The efficiencies and photo stabilities of the new dyes outperform those of one presently commercialized and considered benchmarks over this spectral region (i.e. coumarines, xanthenes, perilendiimides). The enhanced optical properties recorded under drastic laser pumping conditions suggest that these new photonic systems could be outstanding in biophotonic applications like optical microscopy and nanoscopy, since they would allow very long observation times and improved spatial resolution.

Fullerene Building Blocks with Tailor‐Made Solubility and New Insights into Their Hierarchical Self‐Assembly

Abstract Herein, the synthesis of fullerene derivatives with adjustable polarities and lyotropic aggregation properties is reported. The polarity range spans from superhydrophobic to hydrophilic, while simultaneously providing a further reactive position with a view to graft them onto other materials. The synthetic strategy relies on a selective protection with an isoxazoline moiety. The remaining octahedral positions were further functionalized with the desired groups to tune their solubility, yielding mixed [5:1] hexakisadducts. The subsequent deprotection by clean photolytic reaction led to fullerene pentakisadducts with an incomplete octahedral addition pattern, which are useful forerunners for the synthesis of building blocks. Their hydrophobic/hydrophilic behavior has been characterized both in solution and surface through octanol/water partition coefficients (log P) and contact angle measurements. Furthermore, these derivatives can form supramolecular constructions which have been studied by dynamic light scattering (DLS) and cryo‐TEM.