M.H. Fernandes

Corrosion resistance of a composite polymeric coating applied on biodegradable AZ31 magnesium alloy

The high corrosion rate of magnesium alloys is the main drawback to their widespread use, especially in biomedical applications. There is a need for developing new coatings that provide simultaneously corrosion resistance and enhanced biocompatibility. In this work, a composite coating containing polyether imide, with several diethylene triamine and hydroxyapatite contents, was applied on AZ31 magnesium alloys pre-treated with hydrofluoric acid by dip coating. The coated samples were immersed in Hanks solution and the coating performance was studied by electrochemical impedance spectroscopy and scanning electron microscopy. In addition, the behavior of MG63 osteoblastic cells on coated samples was investigated. The results confirmed that the new coatings not only slow down the corrosion rate of AZ31 magnesium alloys in Hanks solution, but also enhance the adhesion and proliferation of MG63 osteoblastic cells, especially when hydroxyapatite nanoparticles were introduced in the coating formulation.

Isotropic micropatterned silica coatings on zirconia induce guided cell growth for dental implants

UNLABELLED Titanium implants are the gold standard in dentistry; however, problems such as gingival tarnishing and peri-implantitis have been reported. For zirconia to become a competitive alternative dental implant material, surface modification techniques that induce guided tissue growth must be developed. OBJECTIVES To develop alternative surface modification techniques to promote guided tissue regeneration on zirconia materials, for applications in dental implantology. METHODS A methodology that combined soft lithography and sol-gel chemistry was used to obtain isotropic micropatterned silica coatings on yttria-stabilized zirconia substrates. The materials were characterized via chemical, structural, surface morphology approaches. In vitro biological behavior was evaluated in terms of early adhesion and viability/metabolic activity of human osteoblast-like cells. Statistical analysis was conducted using one-way ANOVA/Tukey HSD post hoc test. RESULTS Isotropic micropatterned silica coatings on yttria-stabilized zirconia substrates were obtained using a combined approach based on sol-gel technology and soft lithography. Micropatterned silica surfaces exhibited a biocompatible behavior, and modulated cell responses (i.e. inducing early alignment of osteoblast-like cells). After 7d of culture, the cells fully covered the top surfaces of pillar microstructured silica films. SIGNIFICANCE The micropatterned silica films on zirconia showed a biocompatible response, and were capable of inducing guided osteoblastic cell adhesion, spreading and propagation. The results herein presented suggest that surface-modified ceramic implants via soft lithography and sol-gel chemistry could potentially be used to guide periodontal tissue regeneration, thus promoting tight tissue apposition, and avoiding gingival retraction and peri-implantitis.

Surface engineered surgical tools and medical devices

Surface engineered surgical tools and medical devices / , Surface engineered surgical tools and medical devices / , کتابخانه دیجیتال جندی شاپور اهواز

Spontaneous and induced osteoclastogenic behaviour of human peripheral blood mononuclear cells and their CD14 + and CD14 ) cell fractions

Objectives:  Osteoclasts are descended from the CD14+ monocyte/macrophage lineage, but influence of other haematopoietic cells on osteoclastic commitment of their precursors has remained poorly understood. In this study, osteoclastogenic behaviour of peripheral blood mononuclear cells (PBMC) and their CD14+ and CD14− subpopulations has been accessed, in the absence or presence of M‐CSF and RANKL.

Innovative macroporous granules of nanostructured-hydroxyapatite agglomerates: Bioactivity and osteoblast-like cell behaviour

To modulate the biological response of implantable granules, two types of bioactive porous granules composed of nanostructured-hydroxyapatite (HA) agglomerates and microstructured-HA, respectively, were prepared using a polyurethane sponge impregnation and burnout method. The resulting granules presented a highly porous structure with interconnected porosity. Both types of granules were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and mercury intrusion porosimetry. Results showed that nanostructed-HA granules presented higher surface area and porosity than microstructured-HA granules. In vitro testing using MG63 human osteoblast-like cells showed that on both types of surfaces cells were able to adhere, proliferate, and migrate through the macropores, and a higher growth rate was achieved on nanostructured-HA granules than on microstructured-HA granules (76 and 40%, respectively). In addition, these cells maintained similar expression levels of osteoblastic-associated markers namely collagen type I, alkaline phosphatase, bone morphogenetic protein-2, macrophage colony-stimulating factor, and osteoprotegerin. These innovative nanostructured-HA granules may be considered as promising bioceramic alternative matrixes for bone regeneration and drug release application.

Relevance of the sterilization-induced effects on the properties of different hydroxyapatite nanoparticles and assessment of the osteoblastic cell response

Hydroxyapatite (Hap) is a calcium phosphate with a chemical formula that closely resembles that of the mineral constituents found in hard tissues, thereby explaining its natural biocompatibility and wide biomedical use. Nanostructured Hap materials appear to present a good performance in bone tissue applications because of their ability to mimic the dimensions of bone components. However, bone cell response to individual nanoparticles and/or nanoparticle aggregates lost from these materials is largely unknown and shows great variability. This work addresses the preparation and characterization of two different Hap nanoparticles and their interaction with osteoblastic cells. Hap particles were produced by a wet chemical synthesis (WCS) at 37°C and by hydrothermal synthesis (HS) at 180°C. As the ultimate in vivo applications require a sterilization step, the synthesized particles were characterized ‘as prepared’ and after sterilization (autoclaving, 120°C, 20 min). WCS and HS particles differ in their morphological (size and shape) and physicochemical properties. The sterilization modified markedly the shape, size and aggregation state of WCS nanoparticles. Both particles were readily internalized by osteoblastic cells by endocytosis, and showed a low intracellular dissolution rate. Concentrations of WCS and HS particles less than 500 μg ml−1 did not affect cell proliferation, F-actin cytoskeleton organization and apoptosis rate and increased the gene expression of alkaline phosphatase and BMP-2. The two particles presented some differences in the elicited cell response. In conclusion, WCS and HS particles might exhibit an interesting profile for bone tissue applications. Results suggest the relevance of a proper particle characterization, and the interest of an individual nanoparticle targeted research.

Reciprocal induction of human dermal microvascular endothelial cells and human mesenchymal stem cells: time-dependent profile in a co-culture system.

Angiogenesis is closely associated with osteogenesis where reciprocal interactions between endothelial and osteoblast cells play an important role in bone regeneration. For these reasons, the aim of this work was to develop a co‐culture system to study in detail any time‐dependent interactions between human mesenchymal stem cells (HMSC) and human dermal microvascular endothelial cells (HDMEC), co‐cultured in a 2D system, for 35 days.

Paracrine-mediated differentiation and activation of human haematopoietic osteoclast precursor cells by skin and gingival fibroblasts

Objective:  Fibroblasts appear to modulate osteoclastogenesis, but their precise role in this process remains unclear. In this work, paracrine‐mediated osteoclastogenic potential of different human fibroblasts was assessed.

Characterization and preliminary in vivo evaluation of a novel modified hydroxyapatite produced by extrusion and spheronization techniques

A glass-reinforced hydroxyapatite (HA) composite, recently registered as Bonelike®, was developed for bone grafting. This biomaterial is composed of a modified HA matrix with α- and β-tricalcium phosphate secondary phases and ionic species that mimic the chemical composition of human bone. Several in vitro and in vivo studies have confirmed the benefits of these properties. However, these studies were all executed with Bonelike® polygonal granules obtained by crushing. In this study, Bonelike® pellets were produced through a patented process, which required the use of techniques such as extrusion and spheronization. The final product presented a homogeneous size, a 55.1% global porosity and a spherical shape. This spherical shape permitted a better adaptation to the implantation site and improved injectability. Additionally, it also may contribute to formation of macropores as pellets packaging leaves open spaces. After implantation of Bonelike® polygonal granules and Bonelike® pellets in monocortical defects in sheep for 8 and 12 weeks, light microscopy and scanning electron microscopy showed extensive osteointegration simultaneously with bone regeneration for both presentations. Histomorphometric analysis did not reveal statistically significant differences between defects treated with Bonelike® polygonal granules and Bonelike® pellets, which suggests similar in vivo performances.

Antibacterial activity and biocompatibility of three-dimensional nanostructured porous granules of hydroxyapatite and zinc oxide nanoparticles—an in vitro and in vivo study

Ceramic scaffolds are widely studied in the bone tissue engineering field due to their potential in regenerative medicine. However, adhesion of microorganisms on biomaterials with subsequent formation of antibiotic-resistant biofilms is a critical factor in implant-related infections. Therefore, new strategies are needed to address this problem. In the present study, three-dimensional and interconnected porous granules of nanostructured hydroxyapatite (nanoHA) incorporated with different amounts of zinc oxide (ZnO) nanoparticles were produced using a simple polymer sponge replication method. As in vitro experiments, granules were exposed to Staphylococcus aureus and Staphylococcus epidermidis and, after 24 h, the planktonic and sessile populations were assessed. Cytocompatibility towards osteoblast-like cells (MG63 cell line) was also evaluated for a period of 1 and 3 days, through resazurin assay and imaging flow cytometry analysis. As in vivo experiments, nanoHA porous granules with and without ZnO nanoparticles were implanted into the subcutaneous tissue in rats and their inflammatory response after 3, 7 and 30 days was examined, as well as their antibacterial activity after 1 and 3 days of S. aureus inoculation. The developed composites proved to be especially effective at reducing bacterial activity in vitro and in vivo for a weight percentage of 2% ZnO, with a low cell growth inhibition in vitro and no differences in the connective tissue growth and inflammatory response in vivo. Altogether, these results suggest that nanoHA-ZnO porous granules have a great potential to be used in orthopaedic and dental applications as a template for bone regeneration and, simultaneously, to restrain biomaterial-associated infections.