M. Hoek

Search at the Mainz Microtron for light massive gauge bosons relevant for the muon g-2 anomaly.

H. Merkel,1, ∗ P. Achenbach,1 C. Ayerbe Gayoso,1 T. Beranek,1 J. Beričič,2 J. C. Bernauer,1, † R. Böhm,1 D. Bosnar,3 L. Correa,1 L. Debenjak,2 A. Denig,1 M. O. Distler,1 A. Esser,1 H. Fonvieille,4 I. Friščić,3 M. Gómez Rodrı́guez de la Paz,1 M. Hoek,1 S. Kegel,1 Y. Kohl,1 D. G. Middleton,1 M. Mihovilovič,1 U. Müller,1 L. Nungesser,1 J. Pochodzalla,1 M. Rohrbeck,1 G. Ron,5 S. Sánchez Majos,1 B. S. Schlimme,1 M. Schoth,1 F. Schulz,1 C. Sfienti,1 S. Širca,2, 6 M. Thiel,1 A. Tyukin,1 A. Weber,1 and M. Weinriefer1 (A1 Collaboration) Institut für Kernphysik, Johannes Gutenberg-Universität Mainz, D-55099 Mainz, Germany‡ Jožef Stefan Institute, SI-1000 Ljubljana, Slovenia Department of Physics, University of Zagreb, HR-10002 Zagreb, Croatia Clermont Université, Université Blaise Pascal, CNRS/IN2P3, LPC, BP 10448, F-63000 Clermont-Ferrand, France Racah Institute of Physics, Hebrew University of Jerusalem, Jerusalem 91904, Israel Department of Physics, University of Ljubljana, SI-1000 Ljubljana, Slovenia (Dated: April 22, 2014)

GEANT4 Simulation of a Scintillating-Fibre Tracker for the Cosmic-ray Muon Tomography of Legacy Nuclear Waste Containers

Cosmic-ray muons are highly penetrative charged particles that are observed at the sea level with a flux of approximately one per square centimetre per minute. They interact with matter primarily through Coulomb scattering, which is exploited in the field of muon tomography to image shielded objects in a wide range of applications. In this paper, simulation studies are presented that assess the feasibility of a scintillating-fibre tracker system for use in the identification and characterisation of nuclear materials stored within industrial legacy waste containers. A system consisting of a pair of tracking modules above and a pair below the volume to be assayed is simulated within the GEANT4 framework using a range of potential fibre pitches and module separations. Each module comprises two orthogonal planes of fibres that allow the reconstruction of the initial and Coulomb-scattered muon trajectories. A likelihood-based image reconstruction algorithm has been developed that allows the container content to be determined with respect to the scattering density λ, a parameter which is related to the atomic number Z of the scattering material. Images reconstructed from this simulation are presented for a range of anticipated scenarios that highlight the expected image resolution and the potential of this system for the identification of high-Z materials within a shielded, concrete-filled container. First results from a constructed prototype system are presented in comparison with those from a detailed simulation. Excellent agreement between experimental data and simulation is observed showing clear discrimination between the different materials assayed throughout.

The design and performance of a scintillating-fibre tracker for the cosmic-ray muon tomography of legacy nuclear waste containers

Tomographic imaging techniques using the Coulomb scattering of cosmic-ray muons are increasingly being exploited for the non-destructive assay of shielded containers in a wide range of applications. One such application is the characterisation of legacy nuclear waste materials stored within industrial containers. The design, assembly and performance of a prototype muon tomography system developed for this purpose are detailed in this work. This muon tracker comprises four detection modules, each containing orthogonal layers of Saint-Gobain BCF-10 2 mm-pitch plastic scintillating fibres. Identification of the two struck fibres per module allows the reconstruction of a space point, and subsequently, the incoming and Coulomb-scattered muon trajectories. These allow the container content, with respect to the atomic number Z of the scattering material, to be determined through reconstruction of the scattering location and magnitude. On each detection layer, the light emitted by the fibre is detected by a single Hamamatsu H8500 MAPMT with two fibres coupled to each pixel via dedicated pairing schemes developed to ensure the identification of the struck fibre. The PMT signals are read out to standard charge-to-digital converters and interpreted via custom data acquisition and analysis software. The design and assembly of the detector system are detailed and presented alongside results from performance studies with data collected after construction. These results reveal high stability during extended collection periods with detection efficiencies in the region of 80% per layer. Minor misalignments of millimetre order have been identified and corrected in software. A first image reconstructed from a test configuration of materials has been obtained using software based on the Maximum Likelihood Expectation Maximisation algorithm. The results highlight the high spatial resolution provided by the detector system. Clear discrimination between the low, medium and high-Z materials assayed is also observed.

Characterising encapsulated nuclear waste using cosmic-ray muon tomography

A prototype scintillating-fibre detector system has been developed at the University of Glasgow in collaboration with the UK National Nuclear Laboratory (NNL) for the non-destructive assay of UK legacy nuclear waste containers. This system consists of four tracking modules, two above and two below the container under interrogation. Each module consists of two orthogonal planes of 2 mm-pitch fibres yielding one space point. Per plane, 128 fibres are read out by a single Hamamatsu H8500 64-channel MAPMT with two fibres multiplexed onto each pixel. The configuration allows the reconstruction of the incoming and scattered muon trajectories, thus enabling the container content, with respect to atomic number Z, to be determined. Results are shown from experimental data collected for high-Z objects within an air matrix and within a shielded, concrete-filled container. These reconstructed images show clear discrimination between the low, medium and high-Z materials present, with dimensions and positions determined with sub-centimetre precision.

The HERMES recoil detector

The HERMES recoil detector is an exciting addition to the HERMES spectrometer, specifically designed to make one of the first exclusive measurements of deeply virtual Compton scattering (DVCS). DVCS is the experimentally cleanest way to access generalised parton distributions - a theoretical framework that describes the structure of the nucleon. The recoil detector utilises a silicon detector with a large dynamic range capable of reconstructing the momenta of protons in the range of 135 MeV/c to 450 MeV/c, placed directly into the HERA beam vacuum (around the HERMES target) to make both position and energy deposition measurements (for the purposes of momentum reconstruction) of the recoil protons from the process. In addition there is a scintillating fibre tracking (SET) detector placed directly outside the beam vacuum that provides both tracking information and momentum reconstruction data for protons at higher momenta. The third sub-detector is a photon detector that lies concentrically outside the SET and provides useful information on other processes for the purposes of background subtraction. Leptons involved in the interaction will be detected in the existing parts of the HERMES spectrometer. The recoil detectors silicon sub-detector was the subject of a presentation at the IEEE NSS in 2003 by Mathias Reinecke. This presentation is intended as an update on the successful development of the silicon sub-detector as well as providing more information on the impending installation of the detector into the HERMES spectrometer in November 2005

The bar PANDA focussing-lightguide disc DIRC

ANDA will be a fixed target experiment internal to the HESR antiproton storage ring at the future FAIR complex. The ANDA detector requires excellent particle-identification capabilities in order to achieve its scientific potential. Cherenkov counters employing the DIRC principle were chosen as PID detectors for the Target Spectrometer. The proposed Focussing-Lightguide Disc DIRC will cover the forward part of the Target Spectrometer acceptance in the angular range between 5° and 22°. Its design includes a novel approach to mitigate dispersion effects in the solid radiator of a DIRC counter using optical elements. The dispersion correction will enable the Focussing-Lightguide Disc DIRC to provide pion-kaon identification for momenta well above 3.5 GeV/c.

Charged particle response of PbWO4

The response of PbWO4 to high-energy protons has been investigated in two test experiments at the proton facilities Cosy and AGOR. The determined energy resolution below 360 MeV of sigma/E = 1.44%/E-gamma(1/2) + 1.97% is comparable to the known photon response. Measured spectra of inelastically scattered protons below 85 MeV are even compared to similar distributions obtained for BaF2- and CeF3-detectors

First measurement of proton's charge form factor at very low Q2 with initial state radiation

Abstract We report on a new experimental method based on initial-state radiation (ISR) in e–p scattering, which exploits the radiative tail of the elastic peak to study the properties of electromagnetic processes and to extract the proton charge form factor ( G E p ) at extremely small Q 2 . The ISR technique was implemented in an experiment at the three-spectrometer facility of the Mainz Microtron (MAMI). This led to a precise validation of radiative corrections far away from elastic line and provided first measurements of G E p for 0.001 ≤ Q 2 ≤ 0.004 ( GeV / c ) 2 .

Tests and developments of the PANDA Endcap Disc DIRC

The PANDA experiment at the future Facility for Antiproton and Ion Research (FAIR) requires excellent particle identification. Two different DIRC detectors will utilize internally reflected Cherenkov light of charged particles to enable the separation of pions and kaons up to momenta of 4 GeV/c. The Endcap Disc DIRC will be placed in the forward endcap of PANDAs central spectrometer covering polar angles between 5° and 22°. Its final design is based on MCP-PMTs for the photon detection and an optical system made of fused silica. A new prototype has been investigated during a test beam at CERN in May 2015 and first results will be presented. In addition a new synthetic fused silica material by Nikon has been tested and was found to be radiation hard.

Development of a compact photon detector for ANKE at Cosy

Recent improvements in the performance of PbWO4, a high-density inorganic scintillator, offer the possibility to design very compact, large-acceptance electromagnetic calorimeters with excellent timing and good energy resolution, applicable also for photon energies below 1 Gev. Such a detection system is planned to be built for the internal magnetic spectrometer ANKE (Apparatus for Studies of Nucleon and Kaon Ejectiles) at the Cooler Synchrotron (Cosy) Julich. The limited space and stray magnetic fields of ANKE place severe boundary conditions, which have to be taken into account for detector layout and the choice of photo sensors