M. Imroz Sohel

Thermodynamic analysis of lignocellulosic biofuel production via a biochemical process: guiding technology selection and research focus

The aim of this paper is to present an exergy analysis of bioethanol production process from lignocellulosic feedstock via a biochemical process to asses the overall thermodynamic efficiency and identify the main loss processes. The thermodynamic efficiency of the biochemical process was found to be 35% and the major inefficiencies of this process were identified as: the combustion of lignin for process heat and power production and the simultaneous scarification and co-fermentation process accounting for 67% and 27% of the lost exergy, respectively. These results were also compared with a previous analysis of a thermochemical process for producing biofuel. Despite fundamental differences, the biochemical and thermochemical processes considered here had similar levels of thermodynamic efficiency. Process heat and power production was the major contributor to exergy loss in both of the processes. Unlike the thermochemical process, the overall efficiency of the biochemical process largely depends on how the lignin is utilized.

Optimizing the enzyme loading and incubation time in enzymatic hydrolysis of lignocellulosic substrates.

A mathematical model for costing enzymatic hydrolysis of lignocellulosics is presented. This model is based on three variable parameters describing substrate characteristics and three unit costs for substrate, enzymes and incubation. The model is used to minimize the cost of fermentable sugars, as intermediate products on the route to ethanol or other biorefinery products, by calculating optimized values of enzyme loading and incubation time. This approach allows comparisons between substrates, with processing conditions optimized independently for each substrate. Steam-exploded pine wood was hydrolyzed in order to test the theoretical relationship between sugar yield and processing conditions.

Efficiency improvements by geothermal heat integration in a lignocellulosic biorefinery.

In an integrated geothermal biorefinery, low-grade geothermal heat is used as process heat to allow the co-products of biofuel production to become available for higher-value uses. In this paper we consider integrating geothermal heat into a biochemical lignocellulosic biorefinery so that the lignin-enriched residue can be used either as a feedstock for chemicals and materials or for on-site electricity generation. Depending on the relative economic value of these two uses, we can maximize revenue of a biorefinery by judicious distribution of the lignin-enriched residue between these two options. We quantify the performance improvement from integrating geothermal energy for an optimized system. We then use a thermodynamic argument to show that integrating geothermal heat into a biorefinery represents an improvement in overall resource utilization efficiency in all cases considered. Finally, possible future technologies for electricity generation are considered which could improve this efficiency further.

Thermodynamic analysis of a high-yield biochemical process for biofuel production.

This paper presents a thermodynamic analysis of a high-yield biochemical process for biofuel production from lignocelluosic biomass based on a previously proposed process. Unlike the standard biochemical process, which ferments sugar intermediates to ethanol, the process under consideration converts sugars to acetic acid which is esterified and hydrogenated to produce ethanol. This process has a significantly higher yield and produces no carbon dioxide. However, we find that the thermodynamic efficiency of the process is not increased in proportion to the yield gain. An additional survey of various biofuel production processes showed no direct correlation between yield and thermodynamic efficiency. This survey and the detailed thermodynamic analyses lead us to conclude that yield alone is an unreliable performance metric for biofuel technologies.