M. S. Lopes

Linkage disequilibrium and haplotype block structure in six commercial pig lines

Linkage disequilibrium (LD) across the genome is critical information for association studies and genomic selection because it determines the number of SNP that should be used for a successful association analysis and genomic selection. Linkage disequilibrium also influences the accuracy of genomic breeding values. Some studies have demonstrated that SNP in strong LD are organized into discrete blocks of haplotypes, which are separated by possibly hot spots of recombination. To reduce the number of markers needed to be genotyped for association mapping, a set of SNP can be selected that labels all haplotype blocks. We estimated the LD, calculated the average haplotype block size for 6 pig lines, and compared the block size between lines. Six commercial pig lines were genotyped using the Illumina PorcineSNP60 (number of markers M = 62,163) Genotyping BeadChip (Illumina Inc.); on average, a panel of 37,623 SNP with an average minor allelic frequency (MAF) of 0.283 was included in the analysis. The LD declined as a function of distance. All pig lines had an average r(2) above 0.3 for markers 100 to 150 apart. The estimated average block size was 394.885 kb, and blocks between 100 and 400 kb were most prominent (49.96%) in all lines. These results showed that the extent of LD in pigs is much larger than in the cattle population, in accordance with the genetic map length of pigs, which is much shorter than cattle. The evaluated lines have 2,640 to 3,037 blocks, covering 45% of the pig genome, on average. Differences in haplotype block size between lines were observed for some chromosomes (i.e., SSC 3, 5, 7, 13, 14, and 18), which provide a direction for future studies of haplotype block conservation or divergence across lines.

A Genome-Wide Association Study Reveals Dominance Effects on Number of Teats in Pigs

Dominance has been suggested as one of the genetic mechanisms explaining heterosis. However, using traditional quantitative genetic methods it is difficult to obtain accurate estimates of dominance effects. With the availability of dense SNP (Single Nucleotide Polymorphism) panels, we now have new opportunities for the detection and use of dominance at individual loci. Thus, the aim of this study was to detect additive and dominance effects on number of teats (NT), specifically to investigate the importance of dominance in a Landrace-based population of pigs. In total, 1,550 animals, genotyped for 32,911 SNPs, were used in single SNP analysis. SNPs with a significant genetic effect were tested for their mode of gene action being additive, dominant or a combination. In total, 21 SNPs were associated with NT, located in three regions with additive (SSC6, 7 and 12) and one region with dominant effects (SSC4). Estimates of additive effects ranged from 0.24 to 0.29 teats. The dominance effect of the QTL located on SSC4 was negative (−0.26 teats). The additive variance of the four QTLs together explained 7.37% of the total phenotypic variance. The dominance variance of the four QTLs together explained 1.82% of the total phenotypic variance, which corresponds to one-fourth of the variance explained by additive effects. The results suggest that dominance effects play a relevant role in the genetic architecture of NT. The QTL region on SSC7 contains the most promising candidate gene: VRTN. This gene has been suggested to be related to the number of vertebrae, a trait correlated with NT.

Improved estimation of inbreeding and kinship in pigs using optimized SNP panels

BackgroundTraditional breeding programs consider an average pairwise kinship between sibs. Based on pedigree information, the relationship matrix is used for genetic evaluations disregarding variation due to Mendelian sampling. Therefore, inbreeding and kinship coefficients are either over or underestimated resulting in reduction of accuracy of genetic evaluations and genetic progress. Single nucleotide polymorphism (SNPs) can be used to estimate pairwise kinship and individual inbreeding more accurately. The aim of this study was to optimize the selection of markers and determine the required number of SNPs for estimation of kinship and inbreeding.ResultsA total of 1,565 animals from three commercial pig populations were analyzed for 28,740 SNPs from the PorcineSNP60 Beadchip. Mean genomic inbreeding was higher than pedigree-based estimates in lines 2 and 3, but lower in line 1. As expected, a larger variation of genomic kinship estimates was observed for half and full sibs than for pedigree-based kinship reflecting Mendelian sampling. Genomic kinship between father-offspring pairs was lower (0.23) than the estimate based on pedigree (0.26). Bootstrap analyses using six reduced SNP panels (n = 500, 1000, 1500, 2000, 2500 and 3000) showed that 2,000 SNPs were able to reproduce the results very close to those obtained using the full set of unlinked markers (n = 7,984-10,235) with high correlations (inbreeding r > 0.82 and kinship r > 0.96) and low variation between different sets with the same number of SNPs.ConclusionsVariation of kinship between sibs due to Mendelian sampling is better captured using genomic information than the pedigree-based method. Therefore, the reduced sets of SNPs could generate more accurate kinship coefficients between sibs than the pedigree-based method. Variation of genomic kinship of father-offspring pairs is recommended as a parameter to determine accuracy of the method rather than correlation with pedigree-based estimates. Inbreeding and kinship coefficients can be estimated with high accuracy using ≥2,000 unlinked SNPs within all three commercial pig lines evaluated. However, a larger number of SNPs might be necessary in other populations or across lines.

Accuracy of Predicted Genomic Breeding Values in Purebred and Crossbred Pigs.

Genomic selection has been widely implemented in dairy cattle breeding when the aim is to improve performance of purebred animals. In pigs, however, the final product is a crossbred animal. This may affect the efficiency of methods that are currently implemented for dairy cattle. Therefore, the objective of this study was to determine the accuracy of predicted breeding values in crossbred pigs using purebred genomic and phenotypic data. A second objective was to compare the predictive ability of SNPs when training is done in either single or multiple populations for four traits: age at first insemination (AFI); total number of piglets born (TNB); litter birth weight (LBW); and litter variation (LVR). We performed marker-based and pedigree-based predictions. Within-population predictions for the four traits ranged from 0.21 to 0.72. Multi-population prediction yielded accuracies ranging from 0.18 to 0.67. Predictions across purebred populations as well as predicting genetic merit of crossbreds from their purebred parental lines for AFI performed poorly (not significantly different from zero). In contrast, accuracies of across-population predictions and accuracies of purebred to crossbred predictions for LBW and LVR ranged from 0.08 to 0.31 and 0.11 to 0.31, respectively. Accuracy for TNB was zero for across-population prediction, whereas for purebred to crossbred prediction it ranged from 0.08 to 0.22. In general, marker-based outperformed pedigree-based prediction across populations and traits. However, in some cases pedigree-based prediction performed similarly or outperformed marker-based prediction. There was predictive ability when purebred populations were used to predict crossbred genetic merit using an additive model in the populations studied. AFI was the only exception, indicating that predictive ability depends largely on the genetic correlation between PB and CB performance, which was 0.31 for AFI. Multi-population prediction was no better than within-population prediction for the purebred validation set. Accuracy of prediction was very trait-dependent.

Revealing new candidate genes for reproductive traits in pigs: combining Bayesian GWAS and functional pathways

BackgroundReproductive traits such as number of stillborn piglets (SB) and number of teats (NT) have been evaluated in many genome-wide association studies (GWAS). Most of these GWAS were performed under the assumption that these traits were normally distributed. However, both SB and NT are discrete (e.g. count) variables. Therefore, it is necessary to test for better fit of other appropriate statistical models based on discrete distributions. In addition, although many GWAS have been performed, the biological meaning of the identified candidate genes, as well as their functional relationships still need to be better understood. Here, we performed and tested a Bayesian treatment of a GWAS model assuming a Poisson distribution for SB and NT in a commercial pig line. To explore the biological role of the genes that underlie SB and NT and identify the most likely candidate genes, we used the most significant single nucleotide polymorphisms (SNPs), to collect related genes and generated gene-transcription factor (TF) networks.ResultsComparisons of the Poisson and Gaussian distributions showed that the Poisson model was appropriate for SB, while the Gaussian was appropriate for NT. The fitted GWAS models indicated 18 and 65 significant SNPs with one and nine quantitative trait locus (QTL) regions within which 18 and 57 related genes were identified for SB and NT, respectively. Based on the related TF, we selected the most representative TF for each trait and constructed a gene-TF network of gene-gene interactions and identified new candidate genes.ConclusionsOur comparative analyses showed that the Poisson model presented the best fit for SB. Thus, to increase the accuracy of GWAS, counting models should be considered for this kind of trait. We identified multiple candidate genes (e.g. PTP4A2, NPHP1, and CYP24A1 for SB and YLPM1, SYNDIG1L, TGFB3, and VRTN for NT) and TF (e.g. NF-κB and KLF4 for SB and SOX9 and ELF5 for NT), which were consistent with known newborn survival traits (e.g. congenital heart disease in fetuses and kidney diseases and diabetes in the mother) and mammary gland biology (e.g. mammary gland development and body length).

Estimation of Additive, Dominance and Imprinting Genetic Variance Using Genomic Data

Traditionally, exploration of genetic variance in humans, plants, and livestock species has been limited mostly to the use of additive effects estimated using pedigree data. However, with the development of dense panels of single-nucleotide polymorphisms (SNPs), the exploration of genetic variation of complex traits is moving from quantifying the resemblance between family members to the dissection of genetic variation at individual loci. With SNPs, we were able to quantify the contribution of additive, dominance, and imprinting variance to the total genetic variance by using a SNP regression method. The method was validated in simulated data and applied to three traits (number of teats, backfat, and lifetime daily gain) in three purebred pig populations. In simulated data, the estimates of additive, dominance, and imprinting variance were very close to the simulated values. In real data, dominance effects account for a substantial proportion of the total genetic variance (up to 44%) for these traits in these populations. The contribution of imprinting to the total phenotypic variance of the evaluated traits was relatively small (1–3%). Our results indicate a strong relationship between additive variance explained per chromosome and chromosome length, which has been described previously for other traits in other species. We also show that a similar linear relationship exists for dominance and imprinting variance. These novel results improve our understanding of the genetic architecture of the evaluated traits and shows promise to apply the SNP regression method to other traits and species, including human diseases.

Linkage disequilibrium patterns and persistence of phase in purebred and crossbred pig (Sus scrofa) populations.

BackgroundGenomic selection and genomic wide association studies are widely used methods that aim to exploit the linkage disequilibrium (LD) between markers and quantitative trait loci (QTL). Securing a sufficiently large set of genotypes and phenotypes can be a limiting factor that may be overcome by combining data from multiple breeds or using crossbred information. However, the estimated effect of a marker in one breed or a crossbred can only be useful for the selection of animals in another breed if there is a correspondence of the phase between the marker and the QTL across breeds. Using data of five pure pig (Sus scrofa) lines (SL1, SL2, SL3, DL1, DL2), one F1 cross (DLF1) and two commercial finishing crosses (TER1 and TER2), the objectives of this study were: (i) to compare the equality of LD decay curves of different pig populations; and (ii) to evaluate the persistence of the LD phase across lines or final crosses.ResultsAlmost all of the lines presented different extents of LD, except for the SL2 and DL3, both of which exhibited the same extent of LD. Similar levels of LD over large distances were found in crossbred and pure lines. The crossbred animals (DLF1, TER1 and TER2) presented a high persistence of phase with their parental lines, suggesting that the available porcine single nucleotide polymorphism (SNP) chip should be dense enough to include markers that have the same LD phase with QTL across crossbred and parental pure lines. The persistence of phase across pure lines varied considerably between the different line comparisons; however, correlations were above 0.8 for all line comparisons when marker distances were smaller than 50 kb.ConclusionsThis study showed that crossbred populations could be very useful as a reference for the selection of pure lines by means of the available SNP chip panel. Here, we also pinpoint pure lines that could be combined in a multiline training population. However, if multiline reference populations are used for genomic selection, the required density of SNP panels should be higher compared with a single breed reference population.

Artificial selection on introduced Asian haplotypes shaped the genetic architecture in european commercial pigs

Early pig farmers in Europe imported Asian pigs to cross with their local breeds in order to improve traits of commercial interest. Current genomics techniques enabled genome-wide identification of these Asian introgressed haplotypes in modern European pig breeds. We propose that the Asian variants are still present because they affect phenotypes that were important for ancient traditional, as well as recent, commercial pig breeding. Genome-wide introgression levels were only weakly correlated with gene content and recombination frequency. However, regions with an excess or absence of Asian haplotypes (AS) contained genes that were previously identified as phenotypically important such as FASN, ME1, and KIT. Therefore, the Asian alleles are thought to have an effect on phenotypes that were historically under selection. We aimed to estimate the effect of AS in introgressed regions in Large White pigs on the traits of backfat (BF) and litter size. The majority of regions we tested that retained Asian deoxyribonucleic acid (DNA) showed significantly increased BF from the Asian alleles. Our results suggest that the introgression in Large White pigs has been strongly determined by the selective pressure acting upon the introgressed AS. We therefore conclude that human-driven hybridization and selection contributed to the genomic architecture of these commercial pigs.

A genome-wide association study reveals a novel candidate gene for sperm motility in pigs

Sperm motility is one of the most widely used parameters in order to evaluate boar semen quality. However, this trait can only be measured after puberty. Thus, the use of genomic information appears as an appealing alternative to evaluate and improve selection for boar fertility traits earlier in life. With this study we aimed to identify SNPs with significant association with sperm motility in two different commercial pig populations and to identify possible candidate genes within the identified QTL regions. We performed a single-SNP genome-wide association study using genotyped animals from a Landrace-based (L1) and a Large White-based (L2) pig populations. For L1, a total of 602 animals genotyped for 42,551 SNPs were used in the association analysis. For L2, a total of 525 animals genotyped for 40,890 SNPs were available. After the association analysis, a false discovery rate q-value ≤0.05 was used as the threshold for significant association. No SNPs were significantly associated with sperm motility in L1, while six SNPs on Sus scrofa chromosome 1 (position 117.26-119.56Mb) were significant in L2. The mitochondrial methionyl-tRNA formyltransferase (MTFMT) gene, which affects translation efficiency of proteins in sperm cells, was identified as a putative candidate gene. The significant markers identified in this study may be useful to enhance the genetic improvement of sperm motility by selection of boars at an earlier age under a marker assisted selection strategy.

Accuracy of genomic prediction using deregressed breeding values estimated from purebred and crossbred offspring phenotypes in pigs

Genomic selection is applied to dairy cattle breeding to improve the genetic progress of purebred (PB) animals, whereas in pigs and poultry the target is a crossbred (CB) animal for which a different strategy appears to be needed. The source of information used to estimate the breeding values, i.e., using phenotypes of CB or PB animals, may affect the accuracy of prediction. The objective of our study was to assess the direct genomic value (DGV) accuracy of CB and PB pigs using different sources of phenotypic information. Data used were from 3 populations: 2,078 Dutch Landrace-based, 2,301 Large White-based, and 497 crossbreds from an F1 cross between the 2 lines. Two female reproduction traits were analyzed: gestation length (GLE) and total number of piglets born (TNB). Phenotypes used in the analyses originated from offspring of genotyped individuals. Phenotypes collected on CB and PB animals were analyzed as separate traits using a single-trait model. Breeding values were estimated separately for each trait in a pedigree BLUP analysis and subsequently deregressed. Deregressed EBV for each trait originating from different sources (CB or PB offspring) were used to study the accuracy of genomic prediction. Accuracy of prediction was computed as the correlation between DGV and the DEBV of the validation population. Accuracy of prediction within PB populations ranged from 0.43 to 0.62 across GLE and TNB. Accuracies to predict genetic merit of CB animals with one PB population in the training set ranged from 0.12 to 0.28, with the exception of using the CB offspring phenotype of the Dutch Landrace that resulted in an accuracy estimate around 0 for both traits. Accuracies to predict genetic merit of CB animals with both parental PB populations in the training set ranged from 0.17 to 0.30. We conclude that prediction within population and trait had good predictive ability regardless of the trait being the PB or CB performance, whereas using PB population(s) to predict genetic merit of CB animals had zero to moderate predictive ability. We observed that the DGV accuracy of CB animals when training on PB data was greater than or equal to training on CB data. However, when results are corrected for the different levels of reliabilities in the PB and CB training data, we showed that training on CB data does outperform PB data for the prediction of CB genetic merit, indicating that more CB animals should be phenotyped to increase the reliability and, consequently, accuracy of DGV for CB genetic merit.