M. Teresa Montero

Determination by Fluorimetric Titration of the Ionization Constants of Ciprofloxacin in Solution and in the Presence of Liposomes

Abstract A fluorescence titration method was applied for the determination of pKa of ciprofloxacin (CPX) in solution. Values of 6.18 ± 0.05 and 8.76 ± 0.03 were obtained for pKa1 and pKa2, respectively. The method was used to determine the ionization constants in the presence of liposomes of dipalmitoylphosphatidylcholine (DPPC) and DPPC with 10 mol% of dipalmitoylphosphatidylglycerol. A dependence on the surface charge of liposomes was found which supported the existence of a basic electrostatic interaction between CPX and the phospholipid bilayer. Both pK values for the N-4 butyl-piperazinyl derivative (BCPX) of the parent compound were also determined in solution and in the presence of liposomes. The competition of both drugs for the same binding site as 1-anilino-8-naphtalene sulfonate demonstrate that the interaction is governed by electrostatic forces.

Calcium-induced formation of subdomains in phosphatidylethanolamine-phosphatidylglycerol bilayers: a combined DSC, 31P NMR, and AFM study.

We study the effect of Ca(2+) on the lateral segregation of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) (3:1, mol/mol). Supported lipid bilayers (SLBs) were observed by atomic force microscopy (AFM). Since SLBs are formed from liposomes of POPE:POPG, we examined the effect of calcium on these suspensions by differential scanning calorimetry (DSC) and (31)P nuclear magnetic resonance spectroscopy ((31)P NMR). AFM images revealed the existence of two separated phases, the higher showing a region with protruding subdomains. Force spectroscopy (FS) was applied to clarify the nature of each phase. The values of breakthrough force (F(y)), adhesion force (F(adh)), and height extracted from the force curves were assigned to the corresponding gel (L(beta)) and fluid (L(alpha)) phase. The endotherms obtained by DSC suggest that, in the presence of Ca(2+), phase separation already exists in the suspensions of POPE:POPG used to form SLBs. Due to the temperature changes applied during preparation of SLBs a (31)P NMR study was performed to assess the lamellar nature of the samples before spreading them onto mica. With in situ AFM experiments we showed that the binding of Ca(2+) to POPG-enriched domains only induces the formation of subdomains in the L(beta) phase.

Force spectroscopy study of Langmuir-Blodgett asymmetric bilayers of phosphatidylethanolamine and phosphatidylglycerol.

Phosphatidylethanolamine (PE) and phosphatidylgycerol (PG) are the main components of the inner membrane of Escherichia coli. Mixtures of PE and PG mimicking the proportions found in E. coli have been extensively used to reconstitute transmembrane proteins as lactose permease (LacY) in proteoliposomes because in this environment the protein shows maximal activity. Hence, the study of the physicochemical properties of this phospholipid matrix becomes of potential interest. In previous studies, we used atomic force microscopy (AFM) and force spectroscopy (FS) to study the topographic and nanomechanical properties of supported lipid bilayers (SLBs) of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and of POPE and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) (3:1, mol/mol). The study reported here was extended for completeness to asymmetric SLBs obtained by the Langmuir-Blodgett (LB) method. Thus, we prepared SLBs with the proximal leaflet extracted at 30 mN x m(-1) and the distal leaflet extracted at 25 mN x m(-1). We prepared SLBs with both leaflets with same composition (POPG/POPG), and also with the proximal leaflet of POPE and the distal leaflet of POPG or POPE:POPG (3:1, mol/mol). The topography of the SLBs acquired in liquid was compared with the topography of the monolayers acquired in air. Breakthrough (F(y)) and adhesion forces (F(adh)) of SLBs were extracted from force curves. The values obtained are discussed in terms of the possible involvement of the nanomechanical properties of the SLBs in membrane protein insertion. The results provide means for the observation that insertion of LacY in POPE:POPG (3:1, mol/mol) occurs preferentially in the fluid phase, which is the phase with the lower F(y) and the higher F(adh).

Does ciprofloxacin interact with neutral bilayers? An aspect related to its antimicrobial activity

Ciprofloxacin (CPX) physicochemical properties, mainly hydrophobicity and microspeciation, appear to be related with the ability of this drug to adsorb and diffuse through lipid environments. We have combined the information from fluorescence anisotropy, quenching and epifluorescence of phospholipid monolayers, to explore effects of CPX at the phospholipid-buffer interface. Two fluorescent probes (TMA-DPH and PA-DPH) located at surface level were used for anisotropy experiments. The results evidenced that CPX interact with liposomes at surface level and induce a moderate decrease in the bilayer anisotropy. By using two hydrophobic quenchers (iodobenzene and iododecanoic acid) the presence of CPX in the core of the bilayer was excluded. Mixed monolayers of DPPC and CPX evidenced the ability of CPX to compress the monolayer and the epifluorescence observations showed that CPX modifies lipid distribution and surface phase transition. The surface activity of CPX is reviewed from the physicochemical properties of the drug and in relation to its pharmacological activity.

Acyl chain differences in phosphatidylethanolamine determine domain formation and LacY distribution in biomimetic model membranes.

Phosphatidylethanolamine (PE) and phosphatidylglycerol (PG) are the two main components of the inner membrane of Escherichia coli. It is well-known that inner membrane contains phospholipids with a nearly constant polar headgroup composition. However, bacteria can regulate the degree of unsaturation of the acyl chains in order to adapt to different external stimuli. Studies on model membranes of mixtures of PE and PG, mimicking the proportions found in E. coli, can provide essential information on the phospholipid organization in biological membranes and may help in the understanding of membrane proteins activity, such as lactose permease (LacY) of E. coli. In this work we have studied how different phosphatidylethanolamines differing in acyl chain saturation influence the formation of laterally segregated domains. Three different phospholipid systems were studied: DOPE:POPG, POPE:POPG, and DPPE:POPG at molar ratios of 3:1. Lipid mixtures were analyzed at 24 and 37 °C through three different model membranes: monolayers, liposomes, and supported lipid bilayers (SLBs). Data from three different techniques, Langmuir isotherms, Laurdan generalized polarization, and atomic force microscopy (AFM), evidenced that only the DPPE:POPG system exhibited coexistence between gel (L(β)) and fluid (L(α)) phases at both 24 and 37 °C . In the POPE:POPG system the L(β)/L(α) coexistence appears at 27 °C. Therefore, in order to investigate the distribution of LacY among phospholipid phases, we have used AFM to explore the distribution of LacY in SLBs of the three phospholipid systems at 27 °C, where the DOPE:POPG is in L(α) phase and POPE:POPG and DPPE:POPG exhibit L(β)/L(α) coexistence. The results demonstrate the preferential insertion of LacY in fluid phase.

Evidence of phosphatidylethanolamine and phosphatidylglycerol presence at the annular region of lactose permease of Escherichia coli

Biochemical and structural work has revealed the importance of phospholipids in biogenesis, folding and functional modulation of membrane proteins. Therefore, the nature of protein-phospholipid interaction is critical to understand such processes. Here, we have studied the interaction of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG) mixtures with the lactose permease (LacY), the sugar/H(+) symporter from Escherichia coli and a well characterized membrane transport protein. FRET measurements between single-W151/C154G LacY reconstituted in a lipid mixture composed of POPE and POPG at different molar ratios and pyrene-labeled PE or PG revealed a different phospholipid distribution between the annular region of LacY and the bulk lipid phase. Results also showed that both PE and PG can be part of the annular region, being PE the predominant when the PE:PG molar ratio mimics the membrane of E. coli. Furthermore, changes in the thermotropic behavior of phospholipids located in this annular region confirm that the interaction between LacY and PE is stronger than that of LacY and PG. Since PE is a proton donor, the results obtained here are discussed in the context of the transport mechanism of LacY.

Lactose permease lipid selectivity using Förster resonance energy transfer.

The phospholipid composition that surrounds a membrane protein is critical to maintain its structural integrity and, consequently, its functional properties. To understand better this in the present work we have performed FRET measurements between the single tryptophan residue of a lactose permease Escherichia coli mutant (single-W151/C154G LacY) and pyrene-labeled phospholipids (Pyr-PE and Pyr-PG) at 37 degrees C. We have reconstituted this LacY mutant in proteoliposomes formed with heteroacid phospholipids, POPE and POPG, and homoacid phospholipids DOPE and DPPE, resembling the same PE/PG proportion found in the E. coli inner membrane (3:1, mol/mol). A theoretical model has been fitted to the experimental data. In the POPE/POPG system, quantitative model calculations show accordance with the experimental values that requires an annular region composed of approximately approximately 90 mol% PE. The experimental FRET efficiencies for the gel/fluid phase-separated DOPE/POPG system indicate a higher presence of PG in the annular region, from which it can be concluded that LacY shows clear preference for the fluid phase. Similar conclusions are obtained from analysis of excimer-to-monomer (E/M) pyrene ratios. To test the effects of this on cardiolipin (CL) on the annular region, myristoyl-CL and oleoyl-CL were incorporated in the biomimetic POPE/POPG matrix. The experimental FRET efficiency values, slightly larger for Pyr-PE than for Pyr-PG, suggest that CL displaces POPE and, more extensively, POPG from the annular region of LacY. Model fitting indicates that CL enrichment in the annular layer is, in fact, solely produced by replacing PG and that myristoyl-CL is not able to displace PE in the same way that oleoyl-CL does. One of the conclusions of this work is the fact that LacY inserts preferentially in fluid phases of membranes.

Preferential insertion of lactose permease in phospholipid domains: AFM observations.

We report the insertion of a transmembrane protein, lactose permease (LacY) from Escherichia coli (E. coli), in supported lipid bilayers (SLBs) of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG), in biomimetic molar proportions. We provide evidence of the preferential insertion of LacY in the fluid domains. Analysis of the self-assembled protein arrangements showed that LacY: (i) is inserted as a monomer within fluid domains of SLBs of POPE:POPG (3:1, mol/mol), (ii) has a diameter of approx. 7.8nm; and (iii) keeps an area of phospholipids surrounding the protein that is compatible with shells of phospholipids.

Miscibility Behavior and Nanostructure of Monolayers of the Main Phospholipids of Escherichia coli Inner Membrane

We report a thermodynamic study of the effect of calcium on the mixing properties at the air-water interface of two phospholipids that mimic the inner membrane of Escherichia coli: 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol. In this study, pure POPE and POPG monolayers and three mixed monolayers, χ(POPE) = 0.25, 0.5, and 0.75, were analyzed. We show that for χ(POPE) = 0.75, the values of the Gibbs energy of mixing were negative, which implies attractive interactions. We used atomic force microscopy to study the structural properties of Langmuir-Blodgett monolayers that were transferred onto mica substrate at lateral surface pressures of 25 and 30 mN m(-1). The topographic images of pure POPE and POPG monolayers exhibited two domains of differing size and morphology, showing a step height difference within the range expected for liquid-condensed and liquid-expanded phases. The images captured for χ(POPE) = 0.25 were featureless, and for χ(POPE) = 0.5 small microdomains were observed. The composition that mimics quantitatively the proportions found in the inner membrane of E. coli , χ(POPE) = 0.75, showed large liquid condensed domains in the liquid expanded phase. The extension of each domain was quantitatively analyzed. Because calcium is used in the formation of supported bilayers of negatively charged phospholipids, the possible influence of the nanostructure of the apical on the distal monolayer is discussed.

Phase Changes in Supported Planar Bilayers of 1-Palmitoyl-2-oleoyl-sn-glycero- 3-phosphoethanolamine

We studied the thermal response of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) by comparing the differential scanning calorimetry (DSC) data of liposomes with atomic force microscopy (AFM) observations on supported planar bilayers. Planar bilayers were obtained by using the Langmuir-Blodgett (LB) technique: the first leaflet transferred at 30 mN m(-1) and the second at 25 mN m(-1). The topographic evaluation of supported POPE bilayers above room temperature showed changes between 43.8 and 59.8 degrees C. These observations are discussed in relation to the main roughness (Ra) variations and are interpreted as the result of the lamellar liquid crystalline (Lalpha) to inverted hexagonal (HII) phase transition. High-magnification images obtained at 45 degrees C revealed intermediate structures in the transformation. Force spectroscopy (FS) was subsequently applied to gain further structural and nanomechanical insight into the POPE planar bilayers as a function of temperature. These measurements show that the threshold force (Fy), which is the maximum force, that the sample can withstand before breaking, increases from 1.91+/-0.11 nN at 21 degrees C up to 3.08+/-0.17 nN at 43.8 degrees C. This behavior is interpreted as a consequence of the formation of intermediate structures or stalks in the transition from the L alpha to H II phase.