M. V. Ciampolillo

Zirconium-doped lithium niobate: photorefractive and electro-optical properties as a function of dopant concentration

Measurements of refractive indices, electro-optic coefficients and photorefractivity are performed for a set of Zirconium-doped congruent lithium niobate (Zr:LN) crystals as functions of the dopant concentration in the range 0.0-3.0 mol%. The photorefractive properties are studied by measuring the green-light induced birefringence change and by direct observation of the transmitted-beam distortion. The index of refraction data show that the threshold concentration, above which there is a change in the Zr incorporation mechanism, is about 2.0 mol%, but photorefractivity results suggest that the concentration of ZrO2 required to strongly reduce the photorefractive effect is somewhat larger than the 2.0 mol% “threshold” concentration derived from index-of-refraction data. The electro-optic coefficients are little influenced by Zr-doping. All the reported results confirm that Zr:LN is a very promising candidate for the realization of efficient electro-optic and all-optical nonlinear devices working at room temperature.

Structural and optical properties of zirconium doped lithium niobate crystals

Zirconium doped lithium niobate is a promising candidate as a substrate for nonlinear optical applications, since it does not suffer from the so-called “optical damage.” In order to optimize this aspect, the proper Zr concentration has be used, hence the precise determination of the so-called “threshold concentration,” i.e., the concentration above which the photorefractive effect is markedly reduced, is of great importance. In this work, we prepared by Czochralski growth a series of Zr-doped lithium niobate crystals with various Zr content and studied them using structural (high-resolution x-ray diffraction) and optical (birefringence) measurements as a function of the dopant content in the melt. Both the approaches pointed out a marked change in the crystal characteristics for a Zr concentration between 1.5 and 2 mol %, a value which is identified as the threshold concentration.

Lithium niobate crystals doped with iron by thermal diffusion: Relation between lattice deformation and reduction degree

We report, to our knowledge for the first time, on the experimental observation that the maximum lattice deformation induced at the surface of iron doped lithium niobate crystal by thermal diffusion depends on both the Fe concentration and the reduction degree of the doped layer itself. By exploiting a simple linear model, we suggest a description of this experimental evidence and we point out a procedure that allows the characterization of the in-depth profile of the [Fe2+]/[Fe3+] ratio.

Self-confined beams in erbium-doped lithium niobate

We experimentally investigate the formation of self-confined beams in lithium niobate crystals which are doped in the bulk with erbium. Samples have been grown by the Czochralski method with erbium nominal concentrations varying in the range 0.0–0.7 mol% in the melt. The speeds of beam confinement depend on the applied bias and on the beam intensity, as expected, but on the doping level as well. The erbium incorporation influences both the electro-optic coefficient and the photovoltaic field. A very general dependence of the confined beam waist on the refractive index change was experimentally derived, valid now for every lithium niobate crystal, independent on its growing procedure or doping.

Integrated opto-microfluidics platforms in lithium niobate crystals for sensing applications

In micro-analytical chemistry and biology applications, droplet microfluidic technology holds great promise for efficient lab-on-chip systems where higher levels of integration of different stages on the same platform is constantly addressed. The possibility of integration of opto-microfluidic functionalities in lithium niobate (LiNbO3) crystals is presented. Microfluidic channels were directly engraved in a LiNbO3 substrate by precision saw cutting, and illuminated by optical waveguides integrated on the same substrate. The morphological characterization of the microfluidic channel and the optical response of the coupled optical waveguide were tested. In particular, the results indicate that the optical properties of the constituents dispersed in the fluid flowing in the microfluidic channel can be monitored in situ, opening to new compact optical sensor prototypes based on droplets generation and optical analysis of the relative constituents.

Photorefractive effect at 775 nm in doped lithium niobate crystals

The photorefractive effect induced by 775-nm laser light on doped lithium niobate crystals is investigated by the direct observation in the far field of the transmitted-beam distortion as a function of time. Measurements performed at various Zr-doping concentrations and different light intensities show that the 775-nm light beam induces a steady-state photorefractive effect comparable to that of 532-nm light, but the observed build-up time of the photovoltaic field is longer by three-orders of magnitude. The 775-nm photorefractivity of lithium niobate crystals doped with 3 mol. % ZrO2 or with 5.5 mol. % MgO is found to be negligible.

Quantification of Iron (Fe) in Lithium Niobate by Optical Absorption

A quantitative method, based solely on optical absorption, to determine the total iron (Fe) concentration in Fe : LiNbO3 is proposed. Absorption spectra of several samples doped by thermal diffusion with different concentrations and different [Fe2+]/[Fe3+] ratios show an isosbestic point at 342 nm. At this wavelength the absorption is proportional to the total Fe concentration and does not depend on the oxidation state. Thanks to the large number of samples covering a wide range of concentrations, in this work it was possible to estimate an effective absorption cross-section relating the absorbance of a given sample to its iron content. The main advantage of the proposed method is in its simplicity and the fact that the result does not depend on the reduction degree of the sample. As it is known that the absorbance of Fe : LN at another wavelength (532 nm) gives information on the amount of Fe2+ present in the sample, our method makes it possible to characterize both the total Fe amount and its reduction degree within a single optical absorption measurement.

Integrated optics on Lithium Niobate for sensing applications

In micro-analytical chemistry and biology applications, optofluidic technology holds great promise for creating efficient lab-on-chip systems where higher levels of integration of different stages on the same platform is constantly addressed. Therefore, in this work the possibility of integrating opto-microfluidic functionalities in lithium niobate (LiNbO3) crystals is presented. In particular, a T-junction droplet generator is directly engraved in a LiNbO3 substrate by means of laser ablation process and optical waveguides are realized in the same material by exploiting the Titanium in-diffusion approach. The coupling of these two stages as well as the realization of holographic gratings in the same substrate will allow creating new compact optical sensor prototypes, where the optical properties of the droplets constituents can be monitored.

Photorefractivity of zirconium-doped lithium niobate

In this work we study the photorefractive and electro-optical properties of Zirconium-doped congruent lithium niobate (LN) crystals. In order to set the ground for the utilization of these crystals in nonlinear wavelengthconversion devices, we investigate the dependence of the photorefractive properties of the crystals on dopant concentration and incident power. In our experiments the birefringence variations induced by a 532-nm laser beam are measured by using the Sénarmont method, in the ZrO2 concentration range 0-3mol% and intensity range 155- 1800 W/cm2. In order to investigate photorefractivity at high intensities, we have also utilized the direct observation of the distortion of the light spot transmitted by the crystal. In presence of photorefractivity, the transmitted light spot becomes smeared and elongated along the c-axis. Our data show that the threshold ZrO2 concentration can be in the range 2.5-3mol%. Considering that the growth of large homogeneous Zr:LN crystals should be easier than for Mg:LN, and that electrical poling of these crystals has already been demonstrated, Zr-doped LN could represent a more convenient choice than Mg:LN for the realization of room-temperature wavelength converters.

Raman Investigation of Fe in—Diffused Photorefractive Waveguides on Lithium Niobate Substrates

Fe in—diffusion was performed by depositing a Fe film on X-cut LN substrates by sputtering and subsequent annealing in a controlled atmosphere. The photorefractive properties of the Fe:LN film were studied by confocal Micro–Raman spectroscopy. The presence of unexpected lines in the Raman spectra of the samples was detected and attributed to the activation by the photoinduced space charge field which is also the cause of the photorefractive effect. The results in Fe-doped samples are compared to those recorded in nominally pure congruent crystals.