Mª Teresa Galceran

Monitoring of opiates, cannabinoids and their metabolites in wastewater, surface water and finished water in Catalonia, Spain

The occurrence of several opiates and cannabinoids in wastewaters and surface waters has been investigated. Most of the compounds (8 out of 11) were identified in both influent and effluents of fifteen wastewater treatment plants (WWTPs). Codeine, morphine, EDDP and methadone were detected in almost all samples with median values of 69ng/L; 63ng/L; 28ng/L and 18ng/L, respectively, whereas the main cannabinoid metabolite THC-COOH presented a median value of 57ng/L in influents. A rough estimate of heroin and cannabis consumption was performed from the analysis of target urinary metabolites in wastewater influents. Data obtained from influents of rural and urban WWTPs gave 0.07% of heroin consumption (0.67% for the largest urban WWTP) and 4% consumption of cannabinoids, respectively for the population aged between 15 and 64 years old. The presence of opiates and cannabinoids in surface waters used for drinking water production showed the presence of the same compounds identified in wastewater effluents at concentrations up to 76ng/L for codeine; 31ng/L for EDDP; 12ng/L for morphine and 9ng/L for methadone at the intake of the DWTP. A complete removal of all studied drugs present in surface water was achieved during the potabilization process except for methadone and EDDP (91% and 87% removal, respectively).

Determination of aldehydes in drinking water using pentafluorobenzylhydroxylamine derivatization and solid-phase microextraction.

A headspace solid-phase microextraction (HS-SPME) procedure followed by gas chromatography and electron capture detection (GC-ECD) has been developed for the determination of aldehydes in drinking water samples at microg/l concentrations. A previous derivatization with o-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride (PFBHA) was performed due to the high polarity and instability of these ozonation by-products. Several SPME coatings were tested and the divinylbenzene-polydimethylsiloxane (DVB-PDMS) coating in being the most suitable for the determination of these analytes. Experimental SPME parameters such as selection of coating, sample volume, addition of salt, extraction time and temperature of desorption were studied. Analytical parameters such as precision, linearity and detection limits were also determined. HS-SPME was compared to liquid-liquid microextraction (proposed in US Environmental Protection Agency Method 556) by analyzing spiked water samples; a good agreement between results obtained with both techniques was observed. Finally, aldehydes formed at the Barcelona water treatment plant (N.E. Spain) were determined at levels of 0.1-0.5 microg/l. As a conclusion, HS-SPME is a powerful tool for determining ozonation by-products in treated water.

Behavior of pharmaceuticals and drugs of abuse in a drinking water treatment plant (DWTP) using combined conventional and ultrafiltration and reverse osmosis (UF/RO) treatments

The behavior along the potabilization process of 29 pharmaceuticals and 12 drugs of abuse identified from a total of 81 compounds at the intake of a drinking water treatment plant (DWTP) has been studied. The DWTP has a common treatment consisting of dioxychlorination, coagulation/flocculation and sand filtration and then water is splitted in two parallel treatment lines: conventional (ozonation and carbon filtration) and advanced (ultrafiltration and reverse osmosis) to be further blended, chlorinated and distributed. Full removals were reached for most of the compounds. Iopromide (up to 17.2 ng/L), nicotine (13.7 ng/L), benzoylecgonine (1.9 ng/L), cotinine (3.6 ng/L), acetaminophen (15.6 ng/L), erythromycin (2.0 ng/L) and caffeine (6.0 ng/L) with elimination efficiencies ≥ 94%, were the sole compounds found in the treated water. The advanced treatment process showed a slightly better efficiency than the conventional treatment to eliminate pharmaceuticals and drugs of abuse.

Validation and uncertainty estimation of a multiresidue method for pharmaceuticals in surface and treated waters by liquid chromatography–tandem mass spectrometry ☆

The estimation of measurement uncertainty associated with quantitative results is essential to assure the reliability of analytical methods and mandatory when a laboratory implements ISO standard 17025. In this work, a quantitative multi-residue method based on solid-phase extraction (SPE) and ultra-performance liquid chromatography tandem mass spectrometry detection (LC-MS/MS) has been developed and validated for the analysis of 53 pharmaceuticals (analgesics, anti-inflammatories, antibiotics, lipid regulating agents, cholesterol lowering stating agents, gastric drugs, X-ray, and miscellaneous compounds such as sildenafil, prednisone, triclosan, chlorhexidine and miconazole) in surface and drinking waters. A full validation of the method, according to ISO standard 17025 procedure, was performed. Linearity (0.01-250 ng/L range), intra-day precision (3-19%RSD in surface water and 2-19%RSD in drinking water) and inter-day precision (3-16%RSD in surface water and 1-18%RSD in drinking water), matrix effects (low matrix effects were observed for 50% of compounds in both matrices), limits of quantification (0.2-40 ng/L in surface water and 0.2-30 ng/L in drinking water) were calculated. The recoveries at 100 ng/L were >80% for 72% and 79% of the target compounds in surface and drinking waters, respectively. The information obtained from the full method validation has been used to estimate the expanded uncertainty and the uncertainties contributions of the different individual steps of the method for the determination of pharmaceuticals at trace levels in waters. Expanded relative uncertainties ranged from 6% to 23% being the uncertainty associated with reproducibility the main contribution.

Solid-phase microextraction for the determination of iodinated trihalomethanes in drinking water.

A headspace solid-phase microextraction (HS-SPME) method has been developed for the determination of iodinated trihalomethanes (ITHMs) in treated water samples. Mixed THMs (bromochloroido-, bromodiiodo-, chlorodiiodo-, dibromoiodo- and dichloroiodo-) were previously synthesized since commercial standards are not available. HS-SPME has shorter equilibration times than direct SPME, a cleaner background and a longer fiber life. Experimental parameters such as the selection of SPME coatings, sample volume, extraction time and addition of salts were studied. The Carbowax-divinylbenzene fiber appears to be the most suitable for the determination of ITHMs. Analytical parameters such as linearity, limit of detection and precision were also evaluated. HS-SPME was compared to liquid-liquid microextraction for the analyses of spiked treated water samples, obtaining a good agreement. It is concluded that HS-SPME has a great potential for drinking water analysis.

Field-Flow Fractionation as Analytical Technique for the Characterization of Dry Yeast: Correlation with Wine Fermentation Activity

Important oenological properties of wine depend on the winemaking yeast used in the fermentation process. There is considerable controversy about the quality of yeast, and a simple and cheap analytical methodology for quality control of yeast is needed. Gravitational field flow fractionation (GFFF) was used to characterize several commercial active dry wine yeasts from Saccharomyces cerevisiae and Saccharomyces bayanus and to assess the quality of the raw material before use. Laboratory‐scale fermentations were performed using two different S. cerevisiae strains as inocula, and GFFF was used to follow the behavior of yeast cells during alcoholic fermentation. The viable/nonviable cell ratio was obtained by flow cytometry (FC) using propidium iodide as fluorescent dye. In each experiment, the amount of dry wine yeast to be used was calculated in order to provide the same quantity of viable cells. Kinetic studies of the fermentation process were performed controlling the density of the must, from 1.071 to 0.989 (20/20 density), and the total residual sugars, from 170 to 3 g/L. During the wine fermentation process, differences in the peak profiles obtained by GFFF between the two types of commercial yeasts that can be related with the unlike cell growth were observed. Moreover, the strains showed different fermentation kinetic profiles that could be correlated with the corresponding fractograms monitored by GFFF. These results allow optimism that sedimentation FFF techniques could be successfully used for quality assessment of the raw material and to predict yeast behavior during yeast‐based bioprocesses such as wine production.

Multiresidue analysis of 24 Water Framework Directive priority substances by on-line solid phase extraction-liquid chromatography tandem mass spectrometry in environmental waters

This paper reports the development of a fully multiresidue and automated on-line solid phase extraction (SPE) - liquid chromatography tandem mass spectrometry (LC-MS/MS) method for the determination of 24 priority substances (PS) belonging to different classes (pesticides, hormones or pharmaceuticals) included in the Directive 2013/39/UE and the recent Watch List (Decision 2015/495) in water samples (drinking water, surface water, and effluent wastewaters). LC-MS/MS conditions and on-line SPE parameters such as sorbent type, sample and wash volumes were optimized. The developed method is highly sensitive (limits of detection between 0.1 and 1.4ngL-1) and precise (relative standard deviations lower than 8%). As part of the method validation studies, linearity, accuracy and matrix effects were assessed. The main advantage of this method over traditional off-line procedures is the minimization of tedious sample preparation increasing productivity and sample throughput. The optimized method was applied to the analysis of water samples and the results revealed the presence of 16 PS in river water and effluent water of wastewater treatment plants.