Madhusudan Nandy

Isolation of four new CoII/CoIII and NiII complexes with a pentadentate Schiff base ligand: syntheses, structural descriptions and magnetic studies

In this paper we report the temperature and pH dependent syntheses and systematic characterization of four new Co(II)/Co(III) and Ni(II) complexes with a pentadentate Schiff base ligand H(3)L obtained by condensing 1,3,-diaminopropan-2-ol with 2-hydroxyacetophenone in 1:2 molar ratio. The room temperature syntheses involving Co(II) and Ni(II) nitrates and the ligand H(3)L lead to the isolation of the dinuclear species [Co(2)L(2)(H(2)O)] (1), and the mononuclear complex [Ni(LH)] (3), respectively, whereas refluxing at basic pH leads to the tetranuclear complexes, [Co(II)(2)Co(III)(2)L(2)(μ(3)-OMe)(2)(NO(3))(H(2)O)(2)]NO(3)·2(H(2)O) (2), and [Ni(4)L(2)(μ(3)-OMe)(2)(H(2)O)(2)]·2H(2)O (4). 1 is found to be a simple mono alkoxo-bridged Co(III) dinuclear species, whereas 2 and 4 are both rhomb-like tetrameric complexes with double oxo bridges and μ(3)-methoxo bridges, derived from the methanol solvent, in an open dicubane arrangement. Moreover 2 shows six coordinate ordered Co(II) and Co(III) ions and 4 has both six- and five-coordinate Ni(II) centers. Compound 3 is assigned a tentative mononuclear structure based on IR, UV-Vis spectroscopic, (1)H-NMR and ESI mass study results and is supposed to have one Ni(II) center coordinated with a ligand fragment in square planar geometry. The variable temperature magnetic susceptibility study for 2 and 4 is performed which indicate for both 2 and 4 the presence of intracluster dominant ferromagnetic interactions.

Novel mixed-valence Cu compounds formed by CuII dimers with double oximato bridges: in situ formation of anionic layer [Cu2(SCN)3]nn−

Two new N3O donor ketoxime Schiff bases (HL(1) and HL(2)) have been synthesized by condensing N,N-dimethylethylenediamine with diacetylmonoxime and benzilmonoxime, respectively in a 1:1 ratio. Reaction of Cu(ClO4)2·6H2O with HL(1) resulted in a discrete oximato-bridged dinuclear Cu(II) complex [Cu2(L(1))2(H2O)2](ClO4)2 (1). The same reaction in presence of NaSCN affords the complex {[Cu(II)2(L(1))2][Cu(I)4(μ(1,3)-SCN)4(μ(1,1,3)-SCN)2]}n (2), where partial Cu(II)→Cu(I) reduction is observed. In 2, arrays of [Cu(II)2(L(1))2](2+) cationic units are inserted in between 2D {[Cu(I)4(SCN)6](2-)}n layers and connected via μ(1,1,3)-SCN(-) links, thus forming a 3D network. On the other hand, reaction of Cu(CH3COO)2 and HL(2) in the presence of NaSCN gave rise to a mixed-valence pentanuclear cluster {[Cu(II)2(L(2))2(NCS)]2[Cu(I)(SCN)(μ(1,1)-SCN)(μ(1,3)-SCN)]} (3) where Cu(II) is also partly reduced to Cu(I). In compound 3, two cationic [Cu(II)2(L(2))2(NCS)](+) units are bridged by the anionic [Cu(I)(SCN)3](2-) unit through long Cu-SCN linkages. The ligands and the complexes have been characterized by elemental analysis, UV/Vis and IR spectroscopy. The complexes are further characterized by single crystal X-ray diffraction and variable temperature magnetic (VTM) studies. Finally a complete magneto-structural correlation has been established between compounds 1-3 and all the characterized Cu dimers with a double NO bridge.

Ferromagnetic copper(II)–copper(II) interaction in a single chlorido and dicyanamido bridged mixed–valence copper(I/II) 2-D polymer generated by in situ partial reduction of copper(II)

A mixed-valence 2-D Cu(I/II) complex, [{Cu(II)(dmen)(μ-Cl)(μ1,5-dca)}{Cu(I)(μ1,5-dca)}]n (1) (dmen = N,N-dimethylethylenediamine, dca = dicyanamide = [N(CN)2]−), has been synthesized by in situ partial reduction of Cu(II) to Cu(I) using benzoin (2-hydroxy-1,2-di(phenyl)ethanone) as reductant. Complex 1 was characterized by spectroscopic techniques, single crystal X-ray diffraction, and low temperature magnetic measurements. Structural investigation reveals that 1 represents a mixed-valence 2-D coordination polymer formed by parallel 1-D [Cu(II)(dmen)(Cl)Cu(I)(μ1,5-dca)2]n chains running along the b axis, where chloride bridges Cu(II) ions of adjacent polymers through long connections (2.8401(1) Å) to form a 2-D network. The metal centers have two different geometrical environments (distorted square pyramidal and distorted trigonal planar geometries for Cu(II) and Cu(I), respectively). The Cu(II) ions in [Cu(II)(dmen)(μ-Cl)(dca)]n are interconnected through single chloride bridges while within the [Cu(I)(μ1,5-dca)]n units, the dca connects adjacent Cu(I) ions through μ1,5-dca bridges. Magnetic susceptibility measurements reveal weak ferromagnetic interactions (J = +0.3 cm−1) within the chlorido-bridged Cu(II) regular chain present in 1. Simultaneous presence of μ1,5-dca and single chlorido bridges with ferromagnetic coupling is believed to be unique in mixed-valence Cu(I)/Cu(II) complexes.

Synthesis, crystal structure and fluorescence properties of two dinuclear zinc(II) complexes incorporating tridentate (NNO) Schiff bases

Abstract Reactions of hydrated zinc(II) trifluoroacetate and sodium azide with two tridentate Schiff bases HL1 (2-((E)-(2-(dimethylamino)ethylimino)methyl)-4-chlorophenol) and HL2 (2-((E)-(2-(dimethylamino)ethylimino)methyl)-4-bromophenol) under the same reaction conditions yielded two dinuclear isostructural zinc(II) complexes, [Zn(L1)(N3)]2 (1) and [Zn(L2)(N3)]2 (2), respectively. The complexes were characterized systematically by elemental analysis, UV–Vis, FT-IR, and 1H NMR spectroscopic methods. Single-crystal X-ray diffraction studies reveal that each of the dinuclear complexes consists of two crystallographically independent zinc(II) ions connected by double bridging phenoxides. All zinc(II) ions in 1 and 2 are surrounded by similar donor sets and display distorted square–pyramidal coordination geometries. The ligands and complexes reveal intraligand 1(π → π*) flourescence. The enhancement of the fluorescence intensities for the complexes compared to the ligands indicates their potential to serve as photoactive materials.

Trigonal dodecahedral sodium coordination in a trinuclear copper(II)-sodium complex incorporating a salen-type compartmental Schiff base

Abstract A new trinuclear heterometallic complex, [(CuL)Na(CuL)]·ClO4 (1), has been prepared using a Schiff base, H2L (where H2L=N,N′-(1,2-phenylene)-bis(3-methoxysalicylideneimine) and characterized by elemental analysis, Fourier transform infra-red (FT-IR) spectroscopy, UV/Vis, magnetic, electrochemical, and single crystal X-ray diffraction methods. The structure analysis reveals that two metallo-ligand [(CuL)] units are connected to each other by a sodium ion resulting in the cationic unit [(CuL)Na(CuL)]+. Both the copper(II) ions display an almost square planar geometry while the sodium ion adopts a trigonal-dodecahedral coordination geometry. The spectroscopic and other physicochemical studies are in good agreement with the crystal structure of the complex.

Crystal structure, characterization and magnetic properties of a 1D copper(II) polymer incorporating a Schiff base with carboxylate side arm

AbstractA new 1D polymeric copper(II) complex [{Cu(L)(CF3COO)}2]n has been synthesized using a potentially tetradentate Schiff base ligand, HL, ((E)-2-((pyridin-2-yl)methyleneamino)-5-chlorobenzoic acid) and characterized by different spectroscopic methods. Single crystal X-ray structural characterization reveals that the side arm carboxylate group of the coordinated Schiff base exhibits a μ1,3-bridging mode and connects the neighbouring copper(II) ions leading to a zigzag 1D chain structure where the copper(II) ions display distorted square pyramidal geometries. Variable temperature magnetic susceptibility measurement reveals a weak antiferromagnetic exchange (J = −0.47 ± 0.01 cm−1) prevails between copper(II) ions in the chain mediated by the bridging carboxylate group, is also supported by the room temperature EPR spectral study. Electrochemical property of the complex is also reported. Graphical AbstractSyn-anti μ1,3- bridging mode of the side arm carboxylato oxygen atoms of the coordinated Schiff base result in a zigzag 1D copper(II) chain complex, [{Cu(L)(CF3COO)}2]n, which shows antiferromagnetic interaction (J = ‒0.47 ± 0.01 cm‒1).