Magda Blosi

Selective oxidation of 5-hydroxymethyl-2-furfural using supported gold–copper nanoparticles

The oxidation of 5-hydroxymethyl-2-furfural was studied under mild reaction conditions using TiO2-supported Au and Au–Cu catalysts synthesized from pre-formed nanoparticles. Bimetallic gold-copper catalysts display superior activity as compared to monometallic gold. Moreover, after reaction, the bimetallic Au–Cu catalysts can be recovered by filtration and reused without significant loss of activity and selectivity whereas gold materials are not stable. STEM-HAADF imagining and XEDS spectra obtained from bimetallic materials show that particles are homogeneous AuCu alloys. No AuCu ordering or segregation effects were noted from these analyses, and the Au:Cu ratio was quite consistent from particle-to-particle irrespective of its absolute size, proving the efficiency of the original method of synthesis utilized. Isolation effects of gold by copper in the alloy nanoparticles is imagined to play a pivotal role in the reaction. The effect of oxygen pressure, metal loading, reaction time, amount of base and temperature were studied in detail and a 99% yield of furandicarboxylic acid was achieved under optimized reaction conditions.

Green and easily scalable microwave synthesis of noble metal nanosols (Au, Ag, Cu, Pd) usable as catalysts

A green synthesis process was developed for the production of PVP-coated noble metal nanoparticles in the form of stable nanosols. Water is the environmentally benign solvent; glucose serves as a mild, renewable and non-toxic reducing agent and microwave irradiation is an effective and fast heating technique. The same green process has been optimized to obtain several metal nanoparticles (Au, Ag, Cu, Pd), and therefore encourages the easy preparation of bimetallic nanostructures. Nanosols were characterized by dynamic light scattering DLS, HR-TEM, UV-Vis spectroscopy, XRD and ICP-AES. The total reaction yield for all the samples was assessed, the prepared nanoparticles were spherical shaped with an average diameter ranging from 3 to 20 nm. Nanosols with excellent stability over several months, achieved even for high solid contents, were prepared. Additionally, it is shown that all of the synthesized nanoparticles can act as effective catalysts for the reduction of 4-nitrophenol (4-NP) in the presence of NaBH4 (which is otherwise unfeasible without a metal catalyst). This reduction was spectrophotocally followed and the rate constants were determined by measuring the change in absorbance at 400 nm (the wavelength typical of 4-NP) as a function of time. The following ranking of decreasing efficiency of the catalyst was found: Pd > Au > Ag > Cu.

Hollow-fiber flow field-flow fractionation and multi-angle light scattering investigation of the size, shape and metal-release of silver nanoparticles in aqueous medium for nano-risk assessment.

Due to the increased use of silver nanoparticles in industrial scale manufacturing, consumer products and nanomedicine reliable measurements of properties such as the size, shape and distribution of these nano particles in aqueous medium is critical. These properties indeed affect both functional properties and biological impacts especially in quantifying associated risks and identifying suitable risk-mediation strategies. The feasibility of on-line coupling of a fractionation technique such as hollow-fiber flow field flow fractionation (HF5) with a light scattering technique such as MALS (multi-angle light scattering) is investigated here for this purpose. Data obtained from such a fractionation technique and its combination thereof with MALS have been compared with those from more conventional but often complementary techniques e.g. transmission electron microscopy, dynamic light scattering, atomic absorption spectroscopy, and X-ray fluorescence. The combination of fractionation and multi angle light scattering techniques have been found to offer an ideal, hyphenated methodology for a simultaneous size-separation and characterization of silver nanoparticles. The hydrodynamic radii determined by fractionation techniques can be conveniently correlated to the mean average diameters determined by multi angle light scattering and reliable information on particle morphology in aqueous dispersion has been obtained. The ability to separate silver (Ag(+)) ions from silver nanoparticles (AgNPs) via membrane filtration during size analysis is an added advantage in obtaining quantitative insights to its risk potential. Most importantly, the methodology developed in this article can potentially be extended to similar characterization of metal-based nanoparticles when studying their functional effectiveness and hazard potential.

Shape-Related Toxicity of Titanium Dioxide Nanofibres

Titanium dioxide (TiO2) nanofibres are a novel fibrous nanomaterial with increasing applications in a variety of fields. While the biological effects of TiO2 nanoparticles have been extensively studied, the toxicological characterization of TiO2 nanofibres is far from being complete. In this study, we evaluated the toxicity of commercially available anatase TiO2 nanofibres using TiO2 nanoparticles (NP) and crocidolite asbestos as non-fibrous or fibrous benchmark materials. The evaluated endpoints were cell viability, haemolysis, macrophage activation, trans-epithelial electrical resistance (an indicator of the epithelial barrier competence), ROS production and oxidative stress as well as the morphology of exposed cells. The results showed that TiO2 nanofibres caused a cell-specific, dose-dependent decrease of cell viability, with larger effects on alveolar epithelial cells than on macrophages. The observed effects were comparable to those of crocidolite, while TiO2 NP did not decrease cell viability. TiO2 nanofibres were also found endowed with a marked haemolytic activity, at levels significantly higher than those observed with TiO2 nanoparticles or crocidolite. Moreover, TiO2 nanofibres and crocidolite, but not TiO2 nanoparticles, caused a significant decrease of the trans-epithelial electrical resistance of airway cell monolayers. SEM images demonstrated that the interaction with nanofibres and crocidolite caused cell shape perturbation with the longest fibres incompletely or not phagocytosed. The expression of several pro-inflammatory markers, such as NO production and the induction of Nos2 and Ptgs2, was significantly increased by TiO2 nanofibres, as well as by TiO2 nanoparticles and crocidolite. This study indicates that TiO2 nanofibres had significant toxic effects and, for most endpoints with the exception of pro-inflammatory changes, are more bio-active than TiO2 nanoparticles, showing the relevance of shape in determining the toxicity of nanomaterials. Given that several toxic effects of TiO2 nanofibres appear comparable to those observed with crocidolite, the possibility that they exert length dependent toxicity in vivo seems worthy of further investigation.

Microwave-assisted synthesis of Au, Ag and Au-Ag nanoparticles and their catalytic activities for the reduction of nitrophenol

Abstract A simple, microwave-assisted, strategy for producing Au/Ag concentrated sols by glucose reduction in water was developed. Ag-Au bimetallic nanoparticles stabilized by polyvinylpyrrolidone (PVP) were characterized and their catalytic activity was studied in the reduction of 4-nitrophenol with NaBH4 as a probe reaction. The Ag-Au nanoparticles were prepared by first optimizing the synthesis of Au colloid and then carrying out the deposition of a silver shell. Microwave heating has been shown to provide more homogeneous particle nucleation and shorter synthesis time than traditional heating. Prepared Au, Ag and Au/Ag nanocrystals function as effective catalysts for the reduction of p-nitrophenol in the presence of NaBH4, otherwise unfeasible if only the strong reducing agent NaBH4 is employed.

Multiple endpoints to evaluate pristine and remediated titanium dioxide nanoparticles genotoxicity in lung epithelial A549 cells

Titanium dioxide nanoparticles (TiO2 NP) are broadly used in a wide range of applications. Several studies have reported that TiO2 NP possess cytotoxic and genotoxic properties that could induce adverse health effects in humans. The FP7 Sanowork project was aimed to minimize occupational hazard and exposure to engineered nanomaterials (ENM), including TiO2 NP, through the surface modification in order to avoid possible adverse toxic effects for humans. In this study we investigated cytotoxicity, genotoxicity and epigenetic properties of TiO2 NP uncoated and coated with silica or citrate, as well as of the benchmark material P25. We used a panel of in vitro assays in the human lung epithelial cell line A549, in order to better understand if the remediation strategy adopted was able to counteract possible toxic effects of uncoated TiO2 NP. Our results showed that the uncoated TiO2 NP were both cytotoxic and genotoxic, and the remediation strategy adopted did not reduce the adverse effects of uncoated TiO2 NP. In particular, the presence of citrate was able to increase their cytotoxicity and genotoxicity, exerting also epigenotoxic effects, as evaluated by the marked reduction of LINE-1 methylation levels.

A panel of in vitro tests to evaluate genotoxic and morphological neoplastic transformation potential on Balb/3T3 cells by pristine and remediated titania and zirconia nanoparticles

The FP7 Sanowork project was aimed to minimise occupational hazard and exposure to engineered nanomaterials (ENM) through the surface modification in order to prevent possible health effects. In this frame, a number of nanoparticles (NP) have been selected, among which zirconium (ZrO2) and titanium (TiO2) dioxide. In this study, we tested ZrO2 NP and TiO2 NP either in their pristine (uncoated) form, or modified with citrate and/or silica on their surface. As benchmark material, Aeroxide® P25 was used. We assessed cytotoxicity, genotoxicity and induction of morphological neoplastic transformation of NP by using a panel of in vitro assays in an established mammalian cell line of murine origin (Balb/3T3). Cell viability was evaluated by means of colony-forming efficiency assay (CFE). Genotoxicity was investigated by cytokinesis-block micronucleus cytome assay (CBMN cyt) and comet assay, and by the use of the restriction enzymes EndoIII and Fpg, oxidatively damaged DNA was detected; finally, the morphological neoplastic transformation of NP was assayed in vitro by cell transformation assay (CTA). Our results show that the surface remediation has not been effective in modifying cyto- and genotoxic properties of the nanomaterials tested; indeed, in the case of remediation of zirconia and titania with citrate, there is a tendency to emphasise the toxic effects. The use of a panel of assays, such as those we have employed, allowing the evaluation of multiple endpoints, including cell transformation, seems particularly advisable especially in the case of long-term exposure effects in the same cell type.

Silver nanoparticles as a medical device in healthcare settings: a five-step approach for candidate screening of coating agents

Silver nanoparticle-based antimicrobials can promote a long lasting bactericidal effect without detrimental toxic side effects. However, there is not a clear and complete protocol to define and relate the properties of the particles (size, shape, surface charge, ionic content) with their specific activity. In this paper, we propose an effective multi-step approach for the identification of a ‘purpose-specific active applicability window’ to maximize the antimicrobial activity of medical devices containing silver nanoparticles (Ag NPs) (such as surface coaters), minimizing any consequent risk for human health (safety by design strategy). The antimicrobial activity and the cellular toxicity of four types of Ag NPs, differing in their coating composition and concentration have been quantified. Through the implementation of flow-field flow fractionation, Ag NPs have been characterized in terms of metal release, size and shape. The particles are fractionated in the process while being left unmodified, allowing for the identification of biological particle-specific contribution. Toxicity and inflammatory response in vitro have been assessed on human skin models, while antimicrobial activity has been monitored with both non-pathogenic and pathogenic Escherichia coli. The main benefit associated with such approach is the comprehensive assessment of the maximal effectiveness of candidate nanomaterials, while simultaneously indexing their properties against their safety.

Bimetallic Nanoparticles as Efficient Catalysts: Facile and Green Microwave Synthesis

This work deals with the development of a green and versatile synthesis of stable mono- and bi-metallic colloids by means of microwave heating and exploiting ecofriendly reagents: water as the solvent, glucose as a mild and non-toxic reducer and polyvinylpirrolidone (PVP) as the chelating agent. Particle size-control, total reaction yield and long-term stability of colloids were achieved with this method of preparation. All of the materials were tested as effective catalysts in the reduction of p-nitrophenol in the presence of NaBH4 as the probe reaction. A synergistic positive effect of the bimetallic phase was assessed for Au/Cu and Pd/Au alloy nanoparticles, the latter showing the highest catalytic performance. Moreover, monoand bi-metallic colloids were used to prepare TiO2- and CeO2-supported catalysts for the liquid phase oxidation of 5-hydroxymethylfufural (HMF) to 2,5-furandicarboxylic acid (FDCA). The use of Au/Cu and Au/Pd bimetallic catalysts led to an increase in FDCA selectivity. Finally, preformed Pd/Cu nanoparticles were incorporated into the structure of MCM-41-silica. The resulting Pd/Cu MCM-41 catalysts were tested in the hydrodechlorination of CF3OCFClCF2Cl to CF3OCF=CF2. The effect of Cu on the hydrogenating properties of Pd was demonstrated.

Lipopolysaccharide Adsorbed to the Bio-Corona of TiO2 Nanoparticles Powerfully Activates Selected Pro-inflammatory Transduction Pathways

It is known that the adsorption of bioactive molecules provides engineered nanoparticles (NPs) with novel biological activities. However, the biological effects of the adsorbed molecules may also be modified by the interaction with NP. Bacterial lipopolysaccharide (LPS), a powerful pro-inflammatory compound, is a common environmental contaminant and is present in several body compartments such as the gut. We recently observed that the co-incubation of LPS with TiO2 NPs markedly potentiates its pro-inflammatory effects on murine macrophages, suggesting that, when included in a NP bio-corona, LPS activity is enhanced. To distinguish the effects of adsorbed LPS from those of the free endotoxin, a pellet fraction, denominated P25/LPS, was isolated by centrifugation from a mixture of P25 TiO2 NP (128 µg/ml) and LPS (10 ng/ml) in the presence of fetal bovine serum. Western blot analysis of the pellet eluate indicated that the P25/LPS fraction contained, besides proteins, also LPS, pointing to the presence of LPS-doped NP. The effects of adsorbed or free LPS were then compared in Raw264.7 murine macrophages. RT-PCR was used to evaluate the induction of cytokine genes, whereas active, phosphorylated isoforms of proteins involved in signaling pathways were assessed with western blot. At a nominal LPS concentration of 40 pg/ml, P25/LPS induced the expression of both NF-κB and IRF3-dependent cytokines at levels comparable with those observed with free LPS (10 ng/ml), although with different time courses. Moreover, compared to free LPS, P25/LPS caused a more sustained phosphorylation of p38 MAPK and a more prolonged induction of STAT1-dependent genes. Cytochalasin B partially inhibited the induction of Tnfa by P25/LPS, but not by free LPS, and suppressed the induction of IRF3-dependent genes by either P25/LPS or free LPS. These data suggest that, when included in the bio-corona of TiO2 NP, LPS exhibits enhanced and time-shifted pro-inflammatory effects. Thus, in assessing the hazard of NP in real life, the enhanced effects of adsorbed bioactive molecules should be taken into account.