Magdy I. Mohamed

Optimization of chlorphenesin emulgel formulation

This study was conducted to develop an emulgel formulation of chlorphenesin (CHL) using 2 types of gelling agents: hydroxypropylmethyl cellulose (HPMC) and Carbopol 934. The influence of the type of the gelling agent and the concentration of both the oil phase and emulsifying agent on the drug release from the prepared emulgels was investigated using a 23 factorial design. The prepared emulgels were evaluated for their physical appearance, rheological behavior, drug release, antifungal activity, and stability. Commercially available CHL topical powder was used for comparison. All the prepared emulgels showed acceptable physical properties concerning color, homogeneity, consistency, spreadability, and pH value. They also exhibited higher drug release and antifungal activity than the CHL powder. It was found that the emulsifying agent concentration had the most pronounced effect on the drug release from the emulgels followed by the oil phase concentration and finally the type of the gelling agent. The drug release from all the emulgels was found to follow diffusion-controlled mechanism. Rheological studies revealed that the CHL emulgels exhibited a shear-thinning behavior with thixotropy. Stability studies showed that the physical appearance, rheological properties, drug release, and antifungal activity in all the prepared emulgels remained unchanged upon storage for 3 months. As a general conclusion, it was suggested that the CHL emulgel formulation prepared with HPMC with the oil phase concentration in its low level and emulsifying agent concentration in its high level was the formula of choice since it showed the highest drug release and antifungal activity.

Preparation and Evaluation of Self-nanoemulsifying Tablets of Carvedilol

The purpose of this study was to combine the advantages of self-nanoemulsifying drug delivery systems and tablets as a conventional dosage form emphasizing the excipients’ effect on the development of a new dosage form. Systems composed of HCO-40, Transcutol® HP, and medium-chain triglyceride were prepared. Essential properties of the prepared systems regarding carvedilol solubility, a model drug, and self-emulsification time were determined. In order to optimize self-nanoemulsifying drug delivery systems (SNEDDS), formulation dispersion–drug precipitation test was performed in the absence and presence of cellulosic polymers. Furthermore, SNEDDS was loaded onto liquisolid powders. P-glycoprotein (P-gp) activity of the selected SNEDDS was tested using HCT-116 cells. Carvedilol showed acceptable solubility in the selected excipients. It also demonstrated improvement in the stability upon dilution with aqueous media in the presence of cellulosic polymers. Use of granulated silicon dioxide improved the physical properties of liquisolid powders containing SNEDDS. It improved the compressibility of the selected powders and the tested SNEDDS showed marked P-gp inhibition activity. Prepared self-nanoemulsifying tablet produced acceptable properties of immediate-release dosage forms and expected to increase the bioavailability of carvedilol.

Chemoprophylaxis of Schistosomiasis Using Liposome Encapsulated Oxamniquine

AbstractOxamniquine liposomes with different compositions and surface charges were prepared by the chloroform-film method. The amount of oxamniquine entrapped was estimated and found to range from 1 to 23.09% of the initial amount of drug used for preparation of the liposomes depending on the suvace charge of liposomal vesicles. Negatively charged liposomes exhibited the highest percentage entrapment viz., 23.09%. The maximum oxamniquine entrapment was achieved in liposomes prepared from phospholipids molar ratio (7:4.1). The liposome formulations were characterized by her light scattering technique, particle size analysis and rheological characterization. In vitro release kinetics of oxainquine liposomes reveal that the percentage drug release is suvace charge dependent and irrelevant to the molar ratio. The results of organ, liver and spleen, targetting of oxamniquine liposomes in mice reveal that after 7 days of (S.C.) injection the amount of oxamniquine retain more than three times (7:4:1) more than t...

Effect of Chemical Structure on the Release of Certain Propionic Acid Derivatives from Their Dosage Forms

The aim of this study was to investigate the relationship between the chemical structure and release properties of certain drug products. Propionic acid derivatives were used as a model. These include ibuprofen (I), ketoprofen (K), tiaprofenic acid (T), flurbiprofen (F), and naproxen (N). They are all aryl derivatives of propionic acid and differ only in the aryl group. Such an aryl group may be either isobutylphenyl, benzoylphenyl, benzoylthienyl, fluorobiphenyl, or methoxynaphthyl group in I, K, T, F, and N, respectively. Three dosage forms were selected for this study: capsules, suppositories, and creams. The release of propionic acid derivatives from the capsules and suppositories decreased in the order ibuprofen > tiaprofenic acid > ketoprofen > flurbiprofen > naproxen, and for the creams the release decreased in the order ibuprofen > tiaprofenic acid > flurbiprofen > ketoprofen > naproxen. The difference in drug release in the first case was attributed to the difference in the chain length, and in the creams which are composed of two phases, the partition coefficient was found to affect the drug release. The molecular weight of the drug had no effect on the release. The drug release from different dosage forms was not affected after 1 month storage.

Development of novel amisulpride-loaded solid self-nanoemulsifying tablets: preparation and pharmacokinetic evaluation in rabbits

Abstract Objective: The current investigation is focused on the formulation and in vivo evaluation of optimized solid self-nanoemulsifying drug delivery systems (S-SNEDDS) of amisulpride (AMS) for improving its oral dissolution and bioavailability. Methods: Liquid SNEDDS (L-SNEDDS) composed of Capryol™ 90 (oil), Cremophor® RH40 (surfactant), and Transcutol® HP (co-surfactant) were transformed to solid systems via physical adsorption onto magnesium aluminometasilicate (Neusilin US2). Micromeretic studies and solid-state characterization of formulated S-SNEDDS were carried out, followed by tableting, tablet evaluation, and pharmacokinetic studies in rabbits. Results: Micromeretic properties and solid-state characterization proved satisfactory flow properties with AMS present in a completely amorphous state. Formulated self-nanoemulsifying tablets revealed significant improvement in AMS dissolution compared with either directly compressed or commercial AMS tablets. In vivo pharmacokinetic study in rabbits emphasized significant improvements in tmax, AUC(0–12), and AUC(0–∞) at p < .05 with 1.26-folds improvement in relative bioavailability from the optimized self-nanoemulsifying tablets compared with the commercial product. Conclusions: S-SNEDDS can be a very useful approach for providing patient acceptable dosage forms with improved oral dissolution and biovailability.

Microemulsion for topical delivery of fenoprofen calcium: in vitro and in vivo evaluation

Abstract The aim of this study was to investigate microemulsion (ME) based topical delivery system for fenoprofen calcium (FPCa) to eliminate its oral gastrointestinal adverse effects. ME was prepared by the water titration method using oleic acid as oil phase, tween 80 as a surfactant and propylene glycol as a cosurfactant. Oleic acid was selected as oil phase due to its good solubilizing capacity. ME existence region was determined using pseudo-ternary phase diagrams for preparing different formulations. Six different formulations were selected with various values of oil (25–68%), water (2–3%), and the mixture of surfactant and cosurfactant (1:1) (24–67%). The selected ME formulae were characterized for optical birefringence, transmission electron microscopy (TEM), pH, % transmittance, electronic conductivity, drug content, droplet size, rheological properties and stability evaluation. In vitro release study of FPCa from ME s through the synthetic membrane and hairless rat skin were evaluated. The optimized formula ME5 consisting of 5% w/w FPCa, 60% w/w oleic acid as oil phase, 3% w/w aqueous phase, and 32% w/w of surfactant phase containing Tween 80 and propylene glycol (1: 1) showed the highest transdermal flux and highest skin permeation rate. Finally, the % inhibition of carrageenan-induced rat paw edema of the optimized formula ME5 was highly significant (p < 0.001) as compared to plain gel of FPCa. In conclusion, ME is a promising technique for topical delivery of FPCa.

Development of novel amisulpride-loaded liquid self-nanoemulsifying drug delivery systems via dual tackling of its solubility and intestinal permeability

Abstract Objective: The aim of the current investigation was at enhancing the oral biopharmaceutical behavior; solubility and intestinal permeability of amisulpride (AMS) via development of liquid self-nanoemulsifying drug delivery systems (L-SNEDDS) containing bioenhancing excipients. Methods: The components of L-SNEDDS were identified via solubility studies and emulsification efficiency tests, and ternary phase diagrams were constructed to identify the efficient self-emulsification regions. The formulated systems were assessed for their thermodynamic stability, globule size, self-emulsification time, optical clarity and in vitro drug release. Ex vivo evaluation using non-everted gut sac technique was adopted for uncovering the permeability enhancing effect of the formulated systems. Results: The optimum formulations were composed of different ratios of Capryol™ 90 as an oil phase, Cremophor® RH40 as a surfactant, and Transcutol® HP as a co-surfactant. All tested formulations were thermodynamically stable with globule sizes ranging from 13.74 to 29.19 nm and emulsification time not exceeding 1 min, indicating the formation of homogenous stable nanoemulsions. In vitro drug release showed significant enhancement from L-SNEDDS formulations compared to aqueous drug suspension. Optimized L-SNEDDS showed significantly higher intestinal permeation compared to plain drug solution with nearly 1.6–2.9 folds increase in the apparent permeability coefficient as demonstrated by the ex vivo studies. Conclusions: The present study proved that AMS could be successfully incorporated into L-SNEDDS for improved dissolution and intestinal permeation leading to enhanced oral delivery.

Content uniformity testing: suitability of different approaches for marketed low dose tablets.

Context: Content uniformity (CU) testing was developed and improved to control the effectiveness and safety of dosage units. Many modifications of compendial CU test have been introduced and several alternatives have been suggested. Objectives: This study aims to evaluate the degree of suitability of current USP CU test for low dose tablets and to compare the performance of the current test with that of the former USP27-NF22 and other alternatives for different sample sizes. Methods: All locally marketed risperidone (RSP) tablets were analyzed using newly developed and validated isocratic UPLC method. The CU results were statistically analyzed in groups with sample sizes comparable to the USP sampling plans. Results: Seven out of eleven products failed the different requirements of the former and current USP <905>chapters as well as of several alternative CU tests with several substantial deviations. Conclusion: The current USP <905> chapter was found to have some deficiencies that allowed such failed products to exist in the market. The dependence of compendial CU test on two-staged sampling plan and the use of arithmetic mean to calculate the reference and acceptance values were obvious shortcomings.