Mahdi M. Abu-Omar

Advances in 5-hydroxymethylfurfural production from biomass in biphasic solvents

Biomass derived 5-hydroxymethylfurfural (HMF) has emerged as an important platform chemical for the production of value added chemicals and liquid fuels that are currently obtained from petroleum. Although a significant amount of research has been performed over the past decade, the high production cost of HMF is still a bottleneck for its sustainable utilization for making other value added chemicals and fuels on a commercial scale. Among several factors, low product selectivity and high purification cost are major constraints. To address these drawbacks, HMF production methodology in recent years has been directed towards utilization of biphasic media for concurrent extraction of HMF into an organic phase immediately after its formation in the reactive phase. As a result, several dozens of journal and patent articles have appeared, demonstrating the benefit of biphasic media for effective HMF extraction. This review article summarizes the findings of the most recent research articles with critical discussion on the factors that enhance the performance of biphasic media. Particular emphasis has been given to the development of more effective extracting solvents and their beneficial effect in enhancing HMF yield and selectivity, improvement of partition coefficient, mechanistic role of the bi-functional acid catalysts and factors that control high HMF selectivity for solid catalysts.

Cleavage and hydrodeoxygenation (HDO) of C–O bonds relevant to lignin conversion using Pd/Zn synergistic catalysis

The development of chemical methods for the direct catalytic conversion of biomass to high value organic molecules is an area of increasing interest. The plant matter component known as lignin is a polymer consisting of aromatic rings that could provide a means of obtaining aromatic materials currently derived solely from petroleum. This report describes a bimetallic Pd/C and Zn catalytic system that can perform selective hydrodeoxygenation (HDO) of monomeric lignin surrogates as well as successfully cleave the β-O-4 linkages found in dimeric lignin model complexes and synthetic lignin polymers with near quantitative conversions and yields between 80–90%. The reaction with lignin polymer was highly selective affording methoxy substituted propylphenol as the major product. These reactions were performed in a Parr reactor operating at relatively mild temperature (150 °C) and pressure (20 bar H2) using methanol as a solvent. Reaction products were characterized using high-pressure liquid chromatography coupled to a linear quadrupole ion trap mass spectrometer equipped with an electrospray ionization source using negative ion mode. Hydroxide ions were doped into the analyte solutions to encourage negative ion formation. This method ionizes all the mixture components to yield a single ion/analyte with no fragmentation. The catalyst is fully recyclable without the need for additional zinc. X-ray absorption spectroscopy (EXAFS) is consistent with Pd nanoparticles (4–5 nm) and no evidence of Pd–Zn alloy formation. A mechanistic hypothesis on the synergy between Pd and Zn is presented.

A synergistic biorefinery based on catalytic conversion of lignin prior to cellulose starting from lignocellulosic biomass

Current biomass utilization processes do not make use of lignin beyond its heat value. Here we report on a bimetallic Zn/Pd/C catalyst that converts lignin in intact lignocellulosic biomass directly into two methoxyphenol products, leaving behind the carbohydrates as a solid residue. Genetically modified poplar enhanced in syringyl (S) monomer content yields only a single product, dihydroeugenol. Lignin-derived methoxyphenols can be deoxygenated further to propylcyclohexane. The leftover carbohydrate residue is hydrolyzed by cellulases to give glucose in 95% yield, which is comparable to lignin-free cellulose (solka floc). New conversion pathways to useful fuels and chemicals are proposed based on the efficient conversion of lignin into intact hydrocarbons.

Efficient Solid Acid Catalyst Containing Lewis and Brønsted Acid Sites for the Production of Furfurals

Self-assembled nanoparticulates of porous sulfonated carbonaceous TiO2 material that contain Brønsted and Lewis acidic sites were prepared by a one-pot synthesis method. The material was characterized by XRD, FTIR spectroscopy, NH3 temperature-programmed desorption, pyridine FTIR spectroscopy, field-emission scanning electron microscopy, high-resolution transmission electron microscopy, N2 -sorption, atomic absorbance spectroscopy, and inductively coupled plasma optical emission spectroscopy. The carbonaceous heterogeneous catalyst (Glu-TsOH-Ti) with a Brønsted-to-Lewis acid density ratio of 1.2 and more accessible acid sites was effective to produce 5-hydroxymethylfurfural and furfural from biomass-derived mono- and disaccharides and xylose in a biphasic solvent that comprised water and biorenewable methyltetrahydrofuran. The catalyst was recycled in four consecutive cycles with a total loss of only 3u2009% activity. Thus, Glu-TsOH-Ti, which contains isomerization and dehydration catalytic sites and is based on a cheap and biorenewable carbon support, is a sustainable catalyst for the production of furfurals, platform chemicals for biofuels and chemicals.

Lignin depolymerization over Ni/C catalyst in methanol, a continuation: effect of substrate and catalyst loading

Conversion of lignin to fuels and chemicals is a significant challenge given the intrinsic heterogeneity of lignin. Towards development of selective processes for lignin depolymerization, herein we further expand on a catalytic system, Ni/C in methanol, for the conversion of wood lignin into methoxypropylphenols (Song et al., Energy Environ. Sci., 2013, 6, 994–1007). We find that the product spectrum and yield vary significantly across catalyst loading and biomass type and origin. Poplar and eucalyptus result in lower monomer yields than those found for birch. These results suggest that catalytic systems for selective lignin depolymerization must carefully consider the nature of the substrate to achieve high yields of individual, upgradeable products.

Biobased Epoxy Nanocomposites Derived from Lignin-Based Monomers.

Biobased epoxy nanocomposites were synthesized based on 2-methoxy-4-propylphenol (dihydroeugenol, DHE), a molecule that has been obtained from the lignin component of biomass. To increase the content of hydroxyl groups, DHE was o-demethylated using aqueous HBr to yield propylcatechol (DHEO), which was subsequently glycidylated to epoxy monomer. Optimal conditions in terms of yield and epoxy equivalent weight were found to be 60 °C with equal NaOH/phenolic hydroxyl molar ratio. The structural evolution from DHE to cured epoxy was followed by (1)H NMR and Fourier transform infrared spectroscopy. The nano-montmorillonite modified DHEO epoxy exhibited improved storage modulus and thermal stability as determined from dynamic mechanical analysis and thermogravimetric analysis. This study widens the synthesis routes of biobased epoxy thermosets from lignin-based molecules.

From Furfural to Fuel: Synthesis of Furoins by Organocatalysis and their Hydrodeoxygenation by Cascade Catalysis

The synthesis of furoins from biomass-derived furfural and 2-methylfurfural is demonstrated in high yields in green and renewable solvents using N-heterocyclic carbene organocatalysts. The resulting furoin molecules are used as precursors for fuels using cascade catalysis, first by using Pd/C with acidic co-catalysts under very mild conditions to yield oxygenated C12 molecules. Two main products were formed, which we identified as 1,2-bis(5-methyltetrahydrofuran-2-yl)ethane and 1-(5-methyltetrahydrofuran-2-yl)heptanol. The use of a Pd/Zeolite-β catalyst under more extreme conditions resulted in the complete hydrodeoxygenation of 5,5-dimethylfuroin to dodecanes in high yields (76%) and exceptional selectivity (94%) for n-dodecane.

Mechanistic investigation of the Zn/Pd/C catalyzed cleavage and hydrodeoxygenation of lignin

While current biorefinery processes use lignin only for its heat value, the conversion of lignin to high value chemicals is an area of increasing interest. Herein we present a detailed mechanistic study of the hydrodeoxygenation (HDO) of lignin by using a synergistic Pd/C and ZnII catalyst through use of both lignin model compounds and lignocellulosic biomass. Spectroscopic data coupled with the study of lignin model compounds suggest that ZnII activates and facilitates removal of the hydroxyl group at the Cγ position of the β-O-4 ether linkage. Activation is proposed to occur through formation of a six-membered ring complex of ZnII coordinated to the oxygen atoms at Cα and Cγ of the lignin model compound guaiacylglycerol-β-guaiacyl.

High-valent chromium-oxo complex acting as an efficient catalyst precursor for selective two-electron reduction of dioxygen by a ferrocene derivative.

Efficient catalytic two-electron reduction of dioxygen (O2) by octamethylferrocene (Me8Fc) produced hydrogen peroxide (H2O2) using a high-valent chromium(V)-oxo corrole complex, [(tpfc)Cr(V)(O)] (tpfc = tris(pentafluorophenyl)corrole) as a catalyst precursor in the presence of trifluoroacetic acid (TFA) in acetonitrile (MeCN). The facile two-electron reduction of [(tpfc)Cr(V)(O)] by 2 equiv of Me8Fc in the presence of excess TFA produced the corresponding chromium(III) corrole [(tpfc)Cr(III)(OH2)] via fast electron transfer from Me8Fc to [(tpfc)Cr(V)(O)] followed by double protonation of [(tpfc)Cr(IV)(O)](-) and facile second-electron transfer from Me8Fc. The rate-determining step in the catalytic two-electron reduction of O2 by Me8Fc in the presence of excess TFA is inner-sphere electron transfer from [(tpfc)Cr(III)(OH2)] to O2 to produce the chromium(IV) superoxo species [(tpfc)Cr(IV)(O2(•-))], followed by fast proton-coupled electron transfer reduction of [(tpfc)Cr(IV)(O2(•-))] by Me8Fc to yield H2O2, accompanied by regeneration of [(tpfc)Cr(III)(OH2)]. Thus, although the catalytic two-electron reduction of O2 by Me8Fc was started by [(tpfc)Cr(V)(O)], no regeneration of [(tpfc)Cr(V)(O)] was observed in the presence of excess TFA, regardless of the tetragonal chromium complex being to the left of the oxo wall. In the presence of a stoichiometric amount of TFA, however, disproportionation of [(tfpc)Cr(IV)(O)](-) occurred via the protonated species [(tpfc)Cr(IV)(OH)] to produce [(tpfc)Cr(III)(OH2)] and [(tpfc)Cr(V)(O)].

Valence Tautomerization of High-Valent Manganese(V)-Oxo Corrole Induced by Protonation of the Oxo Ligand

The addition of an organic acid to the manganese(V)-oxo corrole complex (tpfc)Mn(V)(O) (tpfc = 5,10,15-tris(pentafluorophenyl)corrole) induces valence tautomerization resulting in the formation of (tpfc(+•))Mn(IV)(OH) in acetonitrile at 298 K. The corrole radical cation manganese(IV) hydroxo complex has been fully characterized by EPR, (1)H NMR, and UV-vis spectroscopy. The reactivity of the valence tautomer (tpfc(+•))Mn(IV)(OH) is compared to that of (tpfc)Mn(V)(O) in three reaction types: hydrogen atom transfer (HAT), electron transfer (ET), and oxygen atom transfer (OAT). (tpfc(+•))Mn(IV)(OH) shows a dramatic 5 orders of magnitude enhancement in the rate of ET but surprisingly does not undergo OAT with PhSMe. The high-valent (tpfc)Mn(V)(O) complex is moderately more reactive toward HAT with substituted phenol and shows superior activity in OAT.