Mahmood Alimahmoodi

Anaerobic bioconversion of carbon dioxide to biogas in an upflow anaerobic sludge blanket reactor.

Abstract The increasing concentration of carbon dioxide (CO2)—the most dominant component of greenhouse gases—in the atmosphere has been of growing concern for many years. Many methods focus on CO2 capture and storage and there is always the risk of CO2 release to the environment. In this study, a new method to convert CO2 to biogas with a high content of methane (CH4) in an anaerobic system with a lab-scale upflow anaerobic sludge blanket reactor at 35 °C was developed. In a series of experiments, the reactor was run with and without CO2- saturated solutions including volatile fatty acids (VFAs) as sources of hydrogen. The concentration of dissolved CO2 in the influent solutions was 2.2–6.1 g/L, with corresponding chemical oxygen demand (COD) values of 2.6– 8.4 g/L for the solutions. Overall CO2 removal values of 2.7–20 g/day (49–88% conversion) were obtained for the organic loading rates (OLR) and CO2 loading rates of 8–36 gCOD/L • day and 6–26 gCO2/L • day, respectively with CH4 purity of above 70%. Also, VFA and COD removal were in the range of 79–95% and 75–90%, respectively. Methanogenic activities of the cultures with the concentrations measured as volatile suspended solids (VSSs) were 0.12–0.40 L CH4/gVSS • d with the highest value for the system containing acetic acid. This anaerobic method can be applied to reduce CO2 emitted to the atmosphere from a wide variety of industrial point sources with a value-added product, CH4.

Development of biofilm on geotextile in a new multi-zone wastewater treatment system for simultaneous removal of COD, nitrogen and phosphorus

This study investigated the formation and evolution of biofilm on a fixed cylindrical structure wrapped in geotextile, in a multi-zone wastewater treatment system called BioCAST. The organic, nitrogen and phosphorus loading rates of (OLR) 0.95-1.86 g COD/(m(3)d), (NLR) 0.02-0.08 kg N/(m(3)d), and (PLR) 0.014-0.02 kg P/(m(3)d), were applied. The results demonstrated high removal efficiencies of carbon, nitrogen and phosphorus, reaching 98.9%, 98.3% and 94.1%, respectively, after 250 d of operation. The biofilm biomass showed a fast formation (reaching 54.2g/L) and maximum phosphorus content of about 7% (dry basis). Biofilm demonstrated the ability to remove phosphorus, and its characteristics correlated with nitrogen and phosphorus removal rates. The geotextile material with filamentous structure causing rapid attachment and formation of biofilm can solve many problems encountered in conventional attached-growth wastewater treatment systems such as slow start-up, low reactor biomass content and low capacity to handle high organic loading rates.

Optimization of the anaerobic treatment of a waste stream from an enhanced oil recovery process

The aim of this work was to optimize the anaerobic treatment of a waste stream from an enhanced oil recovery (EOR) process. The treatment of a simulated waste water containing about 150 mg chemical oxygen demand (COD)/L of total petroleum hydrocarbons (TPH) and the saturation level of CO2 was evaluated. A two-step anaerobic system was undertaken in the mesophilic temperature range (30-40°C). The method of evolutionary operation EVOP factorial design was used to optimize pH, temperature and organic loading rate with the target parameters of CO2 reduction and CH4 production in the first reactor and TPH removal in the second reactor. The results showed 98% methanogenic removal of CO2 and CH4 yield of 0.38 L/gCOD in the first reactor and 83% TPH removal in the second reactor. In addition to enhancing CO2 and TPH removal and CH4 production, application of this method showed the degree of importance of the operational variables and their interactive effects for the two reactors in series.

Performance evaluation of the BioCAST technology: a new multi-zone wastewater treatment system

A new wastewater treatment technology, called BioCAST, has been designed and developed for high rate and simultaneous removal of organic carbonaceous compounds as well as nitrogen and phosphorus, along with reduced sludge generation. The treatment system has two interlinked reactors containing four independent zones with different environmental conditions of aerobic, microaerophilic, anoxic and anaerobic for the biological treatment of wastewater, as well as two clarification zones and a filtration unit for solid-liquid separation. The treatment system contains suspended as well as fixed-film microorganisms. The performance evaluation of the BioCAST system was carried out at organic loading rates of 0.95 to 1.86 kg/m(3) d, and nitrogen and phosphorus loading rates of 0.02 to 0.08 kg/m(3) d and 0.014 to 0.02 kg/m(3) d, respectively. The results demonstrated high removal efficiencies of carbon and nitrogen throughout the operation period, reaching 98.9 and 98.3%, respectively. Phosphorus removal efficiency was lower than 50% during the first 160 days of operation but it increased with the increase of nitrogen loading rate above 0.05 kg/m(3) day and concomitant reduction of C/N ratio below 15. Phosphorus removal efficiency reached 94.1%, producing an effluent concentration of 1.4 mg/L after 225 days of operation. The overall biomass yield based on the consumed COD was 3.7%.

Removal of carbon, nitrogen and phosphorus from the separated liquid phase of hog manure by the multi-zone BioCAST technology.

The removal of chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP) at concentrations of 960 ± 38 to 2400 ± 96 mg/L, 143 ± 9 to 235 ± 15 mg/L and 25 ± 2 to 57 ± 4 mg/L, respectively, from the separated liquid phase of hog manure by the multi-zone BioCAST technology is discussed. Despite the inhibitory effect of hog waste toward microbial activities, removal efficiencies up to 89.2% for COD, 69.2% for TN and 47.6% for TP were obtained during 185 d of continuous operation. The free ammonia inhibition was postulated to be responsible for the steady reduction of COD and TP removal with the increase of TN/TP ratio from 3.6 to 5.8. On the contrary, the increase of COD/TN ratio from 4.8 to 14.1 improved the removal of all contaminants. Nitrogen removal did not show any dependence on the COD/TP ratio, despite the steady increase of COD and TP removal with this ratio in the range of 19.3-50.6. The removal efficiencies of organic and inorganic contaminants increased progressively owing to the adaptation of microbial biomass, resulting from the presence of suspended biomass in the mixed liquor that circulated continuously between the three zones of aerobic, microaerophilic and anoxic, as well as the attached biomass immobilized inside the aerobic zone.

Treatment of synthetic wastewater and hog waste with reduced sludge generation by the multi-environment BioCAST technology

Simultaneous removal of carbon, nitrogen and phosphorus was examined along with reduced generation of biological sludge during the treatment of synthetic wastewater and hog waste by the BioCAST technology. This new multi-environment wastewater treatment technology contains both suspended and immobilized microorganisms, and benefits from the presence of aerobic, microaerophilic, anoxic and anaerobic conditions for the biological treatment of wastewater. The influent concentrations during the treatment of synthetic wastewater were 1,300-4,000 mg chemical oxygen demand (COD)/L, 42-115 mg total nitrogen (TN)/L, and 19-40 mg total phosphorus (TP)/L. The removal efficiencies reached 98.9, 98.3 and 94.1%, respectively, for carbon, TN and TP during 225 days of operation. The removal efficiencies of carbon and nitrogen showed a minimal dependence on the nitrogen-to-phosphorus (N/P) ratio, while the phosphorus removal efficiency showed a remarkable dependence on this parameter, increasing from 45 to 94.1% upon the increase of N/P ratio from 3 to 4.5. The increase of TN loading rate had a minimal impact on COD removal rate which remained around 1.7 kg/m(3) d, while it contributed to increased TP removal efficiency. The treatment of hog waste with influent COD, TN and TP concentrations of 960-2,400, 143-235 and 25-57 mg/L, respectively, produced removal efficiencies up to 89.2, 69.2 and 47.6% for the three contaminants, despite the inhibitory effects of this waste towards biological activity. The treatment system produced low biomass yields with average values of 3.7 and 8.2% during the treatment of synthetic wastewater and hog waste, respectively.