Mainak Ganguly

Fabrication of porous β-Co(OH)2 architecture at room temperature: a high performance supercapacitor.

A facile, cost-effective, surfactant-free chemical route has been demonstrated for the fabrication of porous β-Co(OH)2 hierarchical nanostructure in gram level simply by adopting cobalt acetate as a precursor salt and ethanolamine as a hydrolyzing agent at room temperature. A couple of different morphologies of β-Co(OH)2 have been distinctly identified by varying the mole ratio of the precursor and hydrolyzing agent. The cyclic voltammetry measurements on β-Co(OH)2 displayed significantly high capacitance. The specific capacitance obtained from charge-discharge measurements made at a discharge current of 1 A/g is 416 F/g for the Co(OH)2 sample obtained at room temperature. The charge-discharge stability measurements indicate retention of specific capacitance about 93% after 500 continuous charge-discharge cycles at a current density of 1 A g(-1). The capacitive behavior of the other synthesized morphology was also accounted. The nanoflower-shaped porous β-Co(OH)2 with a characteristic three-dimensional architecture accompanied highest pore volume which made it promising electrode material for supercapacitor application. The porous nanostructures accompanied by high surface area facilitates the contact and transport of electrolyte, providing longer electron pathways and therefore giving rise to highest capacitance in nanoflower morphology. From a broad view, this study reveals a low-temperature synthetic route of β-Co(OH)2 of various morphologies, qualifying it as supercapacitor electrode material.

Morphology Controlled Synthesis of SnS2 Nanomaterial for Promoting Photocatalytic Reduction of Aqueous Cr(VI) under Visible Light

A mild, template free protocol has been demonstrated for SnS2 nanoflake formation at the gram level from SnCl2 and thioacetamide (TAA). The SnS2 nanoflakes congregate to nanoflowers and nanoyarns with variable TAA concentrations. BET measurements reveal that the synthesized nanomaterials are highly porous having very high surface area, and the nanoflower has higher surface area than the nanoyarn. The synthesized nanomaterial finds application for promoting photoreduction of extremely toxic and lethal Cr(VI) under visible light irradiation due to their porous nature. The nanoflowers photocatalyst is proved to be superior to nanoyarn due to the increased surface area and higher pore volume. It was also inferred that increased pH decreased the reaction rate. The present result suggests that the morphology-dependent photoreduction of Cr(VI) by SnS2 nanomaterial under visible light exposure will endorse a new technique for harvesting energy and purification of wastewater.

Fabrication of superhydrophobic copper surface on various substrates for roll-off, self-cleaning, and water/oil separation.

Superhydrophobic surfaces prevent percolation of water droplets and thus render roll-off, self-cleaning, corrosion protection, etc., which find day-to-day and industrial applications. In this work, we developed a facile, cost-effective, and free-standing method for direct fabrication of copper nanoparticles to engender superhydrophobicity for various flat and irregular surfaces such as glass, transparency sheet (plastic), cotton wool, textile, and silicon substrates. The fabrication of as-prepared superhydrophobic surfaces was accomplished using a simple chemical reduction of copper acetate by hydrazine hydrate at room temperature. The surface morphological studies demonstrate that the as-prepared surfaces are rough and display superhydrophobic character on wetting due to generation of air pockets (The Cassie-Baxter state). Because of the low adhesion of water droplets on the as-prepared surfaces, the surfaces exhibited not only high water contact angle (164 ± 2°, 5 μL droplets) but also superb roll-off and self-cleaning properties. Superhydrophobic copper nanoparticle coated glass surface uniquely withstands water (10 min), mild alkali (5 min in saturated aqueous NaHCO3 of pH ≈ 9), acids (10 s in dilute HNO3, H2SO4 of pH ≈ 5) and thiol (10 s in neat 1-octanethiol) at room temperature (25-35 °C). Again as-prepared surface (cotton wool) was also found to be very effective for water-kerosene separation due to its superhydrophobic and oleophilic character. Additionally, the superhydrophobic copper nanoparticle (deposited on glass surface) was found to exhibit antibacterial activity against both Gram-negative and Gram-positive bacteria.

A one pot synthesis of Au–ZnO nanocomposites for plasmon-enhanced sunlight driven photocatalytic activity

To enhance the photocatalytic efficiency of ZnO nanomaterials, plasmonic Au nanoparticles (NPs) have deliberately been introduced into ZnO through a facile, inexpensive one pot hydrothermal approach. The enhanced photocatalytic efficiency was ascribed to surface plasmon resonance induced local electric field enhancement of Au. Thus the photoproduced e−–h+ pair in ZnO under sunlight irradiation is reluctant to recombine. The as-synthesized photocatalyst with an excellent sunlight driven photocatalytic activity can effectively decompose various kinds of organic dyes and maintain a high level of photoactivity even after four cycles. The photocatalytic activity of the Au–ZnO nanocomposites was examined by the photodegradation of a series of cationic and anionic dye molecules such as rhodamine B, Congo red, methyl orange, methylene blue, and Rose Bengal. It is interesting to note that with a reasonable increase in the Au concentration the shape of the nanocomposites remains unaltered but the visible light driven photocatalytic activity is enhanced. This observation and the result are promising for plasmonic photocatalysis. The presence of Au nanoparticles makes the Au–ZnO nanocomposite a superior photocatalyst over the ZnO nanomaterial and the nanocomposite presents altogether a different scenario. In a nut-shell the present study reports not only a new insight into the gram level synthesis of a plasmonic photocatalyst from one pot but also its application in waste water treatment through the degradation of toxic dye molecules upon direct sunlight exposure.

Synthesis of Highly Fluorescent Silver Clusters on Gold(I) Surface

Evolution of fluorescence from a giant core-shell particle is new and synergistic, which requires both gold and silver ions in an appropriate ratio in glutathione (GSH) solution. The formation of highly fluorescent Ag(2)/Ag(3) clusters on the surface of Au(I) assembly results in giant Au(I)(core)-Ag(0)(shell) water-soluble microparticles (~500 nm). Here, Au(I) acts as the template for the generation of fluorescent Ag clusters. The presence of gold under the synthetic strategy is selective, and no other metal supports such synergistic evolution. The core-shell particle exhibits stable and static emission (emission maximum, 565 nm; quantum yield, 4.6%; and stroke shift, 179 nm) with an average lifetime of ~25 ns. The drift of electron density by the Au(I) core presumably enhances the fluorescence. The positively charged core offers unprecedented long-term stability to the microparticles in aqueous GSH solution.

Account of Nitroarene Reduction with Size- and Facet-Controlled CuO–MnO2 Nanocomposites

In this work, we propose a systematic and delicate size- and shape-controlled synthesis of CuO-MnO2 composite nanostructures from time-dependent redox transformation reactions between Cu2O and KMnO4. The parental size and shape of Cu2O nanostructures are retained, even after the redox transformation, but the morphology becomes porous in nature. After prolonged reaction times (>24 h), the product shapes are ruptured, and as a result, tiny spherical porous nanocomposites of ∼100 nm in size are obtained. This method is highly advantageous due to its low cost, its easy operation, and a surfactant or stabilizing agent-free approach with high reproducibility, and it provides a facile but new way to fabricate porous CuO-MnO2 nanocomposites of varied shape and size. The composite nanomaterials act as efficient recyclable catalysts for nitroarene reduction in water at room temperature. The time-dependent reduction kinetics can be easily monitored by using UV-vis spectrophotometer. The catalytic system is found to be very useful toward the reduction of nitro compounds, regardless of the type and position of the substituent(s). Furthermore, it is revealed that CuO-MnO2 composite nanomaterials exhibit facet-dependent catalytic activity toward nitroarene reduction, where the (111) facet of the composite stands to be more active than that of the (100) facet. The results are also corroborated from the BET surface area measurements. It is worthwhile to mention that porous tiny spheres (product of 48 h reaction) exhibit the highest catalytic activity due to pronounced surface area and smaller size.

Hierarchical Au–CuO nanocomposite from redox transformation reaction for surface enhanced Raman scattering and clock reaction

Electrochemical processing has already manifested its prominence for obtaining well structured composite materials. The method is highly precise and is reduction potential driven. This methodology has resulted in a hierarchical Au–CuO nanocomposite from a chosen redox transformation reaction between the newly synthesized spherical and roughened Cu2O nanoparticles and HAuCl4. Thus the attractive shape as well as reducing capability of Cu2O made it promising as a starting material. The proposed redox transformation reaction does not need any additional reducing or stabilizing agents. The reduction potential value of CuO/Cu2O (+0.66 V vs. SHE) supports the quantitative reduction of Au(III) ions because of its higher reduction potential (+1.69 V vs. SHE) i.e., for the AuCl4−/Au half cell. The prescribed conditions, spontaneous redox reaction and the morphology of Cu2O nanoparticles help to produce the unique Au–CuO nanoflowers. The formation of Au–CuO nanocomposites from Cu2O nanospheres is characterised by several physical techniques such as XRD, XPS and FTIR. Finally the flower like Au–CuO nanocomposite shows higher SERS activity with 4-aminothiophenol (4-ATP) as a probe molecule than what is evident from the individual components (Au or Cu2O or CuO). Additionally the derived Au–CuO nanocomposite has also been found to be an effective catalyst for the clock reaction employing methylene blue and ascorbic acid in solution.

A Complementary Palette of NanoCluster Beacons

NanoCluster Beacons (NCBs), which use few-atom DNA-templated silver clusters as reporters, are a type of activatable molecular probes that are low-cost and easy to prepare. While NCBs provide a high fluorescence enhancement ratio upon activation, their activation colors are currently limited. Here we report a simple method to design NCBs with complementary emission colors, creating a set of multicolor probes for homogeneous, separation-free detection. By systematically altering the position and the number of cytosines in the cluster-nucleation sequence, we have tuned the activation colors of NCBs to green (C8–8, 460 nm/555 nm); yellow (C5–5, 525 nm/585 nm); red (C3–4, 580 nm/635 nm); and near-infrared (C3–3, 645 nm/695 nm). At the same NCB concentration, the activated yellow NCB (C5–5) was found to be 1.3 times brighter than the traditional red NCB (C3–4). Three of the four colors (green, yellow, and red) were relatively spectrally pure. We also found that subtle changes in the linker sequence (down to the single-nucleotide level) could significantly alter the emission spectrum pattern of an NCB. When the length of linker sequences was increased, the emission peaks were found to migrate in a periodic fashion, suggesting short-range interactions between silver clusters and nucleobases. Size exclusion chromatography results indicated that the activated NCBs are more compact than their native duplex forms. Our findings demonstrate the unique photophysical properties and environmental sensitivities of few-atom DNA-templated silver clusters, which are not seen before in common organic dyes or luminescent crystals.

One pot synthesis of intriguing fluorescent carbon dots for sensing and live cell imaging.

We report a simple one-pot synthesis of highly fluorescent carbon dots (CDs) via modified hydrothermal (MHT) treatment of alkaline solution of dopamine and cysteine. These CDs (λex=320 nm, λem=390 nm, and quantum yield ∼ 5.1%) are of ∼ 2-3 nm in diameter. Further attempt of synthesizing CDs in some common water-miscible solvents ends up the fact that the MHT product from acetone medium is nonfluorescent. However, CDs, produced in aqueous medium, are so stable that they can be dried as a deliverable solid (WCD) without any alteration of fluorescing property if reversibly dispersed in water. Fluorescence of WCD is quenched selectively in acetone. Quenching occurs presumably due to the disruption of radiative recombination along with the hindrance in quantum confinement of the emissive energy traps to the particle surface. Successive quenching of fluorescence of WCD in different acetone concentration admixed in water paves the way to selective acetone sensing (LOD=8.75 × 10(-7) M). The synthesized CDs (in aqueous medium) are cytocompatible and are efficient fluorescent probe for cell imaging. Only living cells are recognized exclusively from fluorescence imaging leaving aside dead cells, while cells are treated with CDs.

Enlightening surface plasmon resonance effect of metal nanoparticles for practical spectroscopic application

Surface plasmon resonance (SPR) is the manifestation of a resonance effect due to the interaction of conduction electrons of metal nanoparticles with incident photons. The interaction relies on the size and shape of the metal nanoparticles and on the nature and composition of the dispersion medium. By understanding the mechanistic aspects of the interaction of altered nanoparticle morphologies together with the associated medium effect, a new technology has been developed for careful spectroscopic monitoring. Each change can be followed by various spectroscopic techniques, which lead to sensing applications and imaging events. From successful SPR band monitoring through spectroscopy, new optoelectronic technology and sensors, including color sensors and sensor devices, have been developed. In this review, we discuss the important role of SPR and its efficacy to heighten practical spectroscopic applications.