Manabu Kai

RF power dependence of microstrip disk resonators with YBCO films for 4 GHz band

High-Tc superconducting (HTS) power filters have an attractive possibility of being applied to the base stations of the- future mobile-communication systems. In the microstrip structure, disk-shape-patterned HTS resonators are considered potential candidates for the HTS power filters. In order to research the application feasibility of disk resonators, the resonator samples were fabricated with different quality YBCO thin-films, and the power handling and third intermodulation-distortion (IMD3) of the samples were then examined for the incident continuous wave power of up to about 10 W around 4 GHz at cryogenic temperatures. We discuss the results on the relationship between the RF power dependence and the YBCO film qualities.

HTS microstrip disk resonator with an upper dielectric layer for 4GHz

We propose HTS microstrip disk resonator with an upper dielectric layer as a candidate resonator structure of HTS compact power filter for 4GHz band. The electromagnetic simulations on the upper dielectric layer examined the current distributions of the HTS resonators that had TM11 mode resonance of about 4 GHz. By the simulations, it is evaluated that of the maximum current density near the end portion of the disk-shape pattern of the resonator with the thick upper-layered structure decreases by roughly 30-50 percent, as compared with that of the resonator without it. Then, we designed and fabricated the resonator samples with and without the upper dielectrics. The RF power measurement results indicated that the upper dielectric layer leads to an increase in handling power.