Manfred Rothhardt

Fiber Bragg grating inscription combining DUV sub-picosecond laser pulses and two-beam interferometry

The combination of fiber Bragg grating inscription with femtosecond laser sources and the usage of the Talbot interferometer setup not only gives access to the fabrication of Bragg gratings in new types of materials but also allows, at the same time, to keep the high flexibility of an interferometric setup in choosing the Bragg grating wavelength. Since the spatial and temporal coherence properties of the femtosecond laser source differ strongly from those of conventional laser sources, specific limits and tolerances in the interferometric setup have to be considered. Such limits are investigated on the basis of an analytical ray tracing model. The results are applied to tolerance measurements of fiber Bragg grating reflections recorded with a DUV sub-picosecond laser source at 262 nm. Additionally we demonstrate the wavelength versatility of the two-beam interferometer setup for femtosecond inscription over a 40 nm wavelength band. Inscription experiments in Al/Yb doped silica glasses are demonstrated as a prove for the access to non-photosensitive fibers.

Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing

An environmentally-stable low-repetition rate fiber oscillator is developed to produce narrow-bandwidth pulses with several tens of picoseconds duration. Based on this oscillator an alignment-free all-fiber laser for multi-photon microscopy is realized using in-fiber frequency conversion based on four-wave-mixing. Both pump and Stokes pulses for coherent anti-Stokes Raman scattering (CARS) microscopy are readily available from one fiber end, intrinsically overlapped in space and time, which drastically simplifies the experimental handling for the user. The complete laser setup is mounted on a home-built laser scanning microscope with small footprint. High-quality multimodal microscope images of biological tissue are presented probing the CH-stretching resonance of lipids at an anti-Stokes Raman-shift of 2845 cm(-1) and second-harmonic generation of collagen. Due to its simplicity, compactness, maintenance-free operation, and ease-of-use the presented low-cost laser is an ideal source for bio-medical applications outside laser laboratories and in particular inside clinics.

Thermal regeneration of fiber Bragg gratings in photosensitive fibers

We report about a thermal regeneration of fiber Bragg gratings written in photosensitive fibers with nanosecond laser pulses. We observe a regenerative process in a highly photosensitive fiber without hydrogen loading which indicates a secondary grating growth in an optical fiber by thermal activation. This process is more temperature stable than the commonly known gratings produced by color center modifications. The writing conditions of such new type of gratings are investigated and the temperature behavior of these regenerated fiber Bragg gratings is analyzed. The application possibilities are in the field of high temperature sensor systems by making use of the combination of good spectral shape of a Type I grating with a Type II like temperature stability.

Fiber Bragg Gratings in Germanium-Doped Highly Birefringent Microstructured Optical Fibers

We present a dedicated fiber Bragg grating (FBG) inscription experiment to investigate the compatibility of a microstructured optical fiber (MOF) with conventional FBG inscription setups. For the studied MOF, the angular orientation of the fiber in the interferometric excimer laser setup was found to have no significant influence on the final reflection of the inscribed FBGs. We also show that an array of multiplexed FBGs can be inscribed in a single MOF with a repeatability and quality that match fiber sensing requirements.

Splicing Ge-doped photonic crystal fibers using commercial fusion splicer with default discharge parameters.

A novel technique for splicing a small core Ge-doped photonic crystal fiber (PCF) was demonstrated using a commercial fusion splicer with default discharge parameters for the splicing of two standard single mode fibers (SMFs). Additional discharge parameter adjustments are not required to splice the PCF to several different SMFs. A low splice loss of 1.0 approximately 1.4 dB is achieved. Low or no light reflection is expected at the splice joint due to the complete fusion of the two fiber ends. The splice joint has a high bending strength and does not break when the bending radius is decreased to 4 mm.

High-reflectivity draw-tower fiber Bragg gratings—arrays and single gratings of type II

Fiber Bragg gratings (FBG) were manufactured during the fiber drawing process [draw tower grating (DTG)] with excellent reflectivity values. This was done in the region of 1550 nm by single pulses of a 248-nm excimer laser applied during the fiber drawing process of single mode fibers. An improved setup for the writing process and special photosensitive fibers enable the manufacture of type I DTG arrays with a reflectivity of up to 40% and type II DTGs with a reflectivity near 100%. Details of the setup and results of the DTG arrays and DTGs of type II are reported.

Multicore fiber with integrated fiber Bragg gratings for background-free Raman sensing

In the last years a variety of fiber optic Raman probes emerged, which are only partly suited for in vivo applications. The in vivo capability is often limited by the bulkiness of the probes. The size is associated with the required filtering of the probes, which is necessary due to Raman scattering inside the fibers. We employed in-line fiber Bragg gratings (FBG) as notch filter for the collection path and integrated them in a novel type of Raman probe. Multicore singlemode fibers (MCSMF) were designed and drawn integrating 19 singlemode cores to achieve better collection efficiency. A Raman probe was assembled with one excitation fiber and six MCSMF with inscribed FBGs as collection fibers. The probe was characterized regarding Raman background suppression, collection efficiency, and distance dependence. First Raman measurements on brain tissue are presented.

Optical switch based on a fluid-filled photonic crystal fiber Bragg grating

We report the implementation of an in-fiber optical switch by means of filling a fluid into the air holes of a photonic crystal fiber with a fiber Bragg grating. Such a switch can turn on/off light transmission with an extinction ratio of up to 33 dB within a narrow wavelength range (Bragg wavelength) via a small temperature adjustment of +/-5 degrees C. The switching function is based on the temperature-dependent coupling between the fundamental core mode and the rod modes in the fluid-filled holes resulting from the thermo-optic effect of the filled fluid.

High-mechanical-strength single-pulse draw tower gratings

The inscription of fiber Bragg gratings during the drawing process is a very useful method to realize sensor arrays with high numbers of gratings and excellent mechanical strength and also type II gratings with high temperature stability. Results of single pulse grating arrays with numbers up to 100 and definite wavelengths and positions for sensor applications were achieved at 1550 nm and 830 nm using new photosensitive fibers developed in IPHT. Single pulse type I gratings at 1550 nm with more than 30% reflectivity were shown first time to our knowledge. The mechanical strength of this fiber with an Ormocer coating with those single pulse gratings is the same like standard telecom fibers. Weibull plots of fiber tests will be shown. At 830 nm we reached more than 10% reflectivity with single pulse writing during the fiber drawing in photosensitive fibers with less than 16 dB/km transmission loss. These gratings are useful for stress and vibration sensing applications. Type II gratings with reflectivity near 100% and smooth spectral shape and spectral width of about 1 nm are temperature stable up to 1200 K for short time. They are also realized in the fiber drawing process. These gratings are useful for temperature sensor applications.

H 2 Sensing Based on a Pd-Coated Tapered-FBG Fabricated by DUV Femtosecond Laser Technique

An optical fiber probe sensor based on a tapered-fiber Bragg grating (FBG) coated with 150-nm-thick Pd film is proposed for hydrogen detection. The FBG was written in a 50-μm-diameter tapered fiber by deep ultraviolet femtosecond laser technology. A second FBG was inscribed in the 125 μm-fiber section for temperature compensation. The sensing head was able to detect H2 concentration in the range 0%-1% (v/v) H2 at room temperature; a maximum sensitivity of 81.8 pm/% (v/v) H2 was attained with temperature compensation. The influence of the Pd coating over temperature sensitivity of standard and tapered-FBGs is also presented.