Manuel A. Ortuño

Metal–Organic Framework Supported Cobalt Catalysts for the Oxidative Dehydrogenation of Propane at Low Temperature

Zr-based metal–organic frameworks (MOFs) have been shown to be excellent catalyst supports in heterogeneous catalysis due to their exceptional stability. Additionally, their crystalline nature affords the opportunity for molecular level characterization of both the support and the catalytically active site, facilitating mechanistic investigations of the catalytic process. We describe herein the installation of Co(II) ions to the Zr6 nodes of the mesoporous MOF, NU-1000, via two distinct routes, namely, solvothermal deposition in a MOF (SIM) and atomic layer deposition in a MOF (AIM), denoted as Co-SIM+NU-1000 and Co-AIM+NU-1000, respectively. The location of the deposited Co species in the two materials is determined via difference envelope density (DED) analysis. Upon activation in a flow of O2 at 230 °C, both materials catalyze the oxidative dehydrogenation (ODH) of propane to propene under mild conditions. Catalytic activity as well as propene selectivity of these two catalysts, however, is different under the same experimental conditions due to differences in the Co species generated in these two materials upon activation as observed by in situ X-ray absorption spectroscopy. A potential reaction mechanism for the propane ODH process catalyzed by Co-SIM+NU-1000 is proposed, yielding a low activation energy barrier which is in accord with the observed catalytic activity at low temperature.

True and masked three-coordinate T-shaped platinum(II) intermediates

Summary Although four-coordinate square-planar geometries, with a formally 16-electron counting, are absolutely dominant in isolated Pt(II) complexes, three-coordinate, 14-electron Pt(II) complexes are believed to be key intermediates in a number of platinum-mediated organometallic transformations. Although very few authenticated three-coordinate Pt(II) complexes have been characterized, a much larger number of complexes can be described as operationally three-coordinate in a kinetic sense. In these compounds, which we have called masked T-shaped complexes, the fourth position is occupied by a very weak ligand (agostic bond, solvent molecule or counteranion), which can be easily displaced. This review summarizes the structural features of the true and masked T-shaped Pt(II) complexes reported so far and describes synthetic strategies employed for their formation. Moreover, recent experimental and theoretical reports are analyzed, which suggest the involvement of such intermediates in reaction mechanisms, particularly C–H bond-activation processes.

Tuning N-Heterocyclic Carbenes in T-Shaped PtII Complexes for Intermolecular CH Bond Activation of Arenes†

Small change matters: T-shaped Pt(II) complexes with less flexible substituents, than, for example, isopropyl or tert-butyl groups, on N-heterocyclic carbene (NHC) ligands allow for C-H bond activation reactions of aromatic compounds (see scheme; BAr(f)(4)(-) =tetrakis[(3,5-trifluoromethyl)phenyl]borate; F yellow, Pt red). NHC substituents that are not highly branched prevent agostic interactions and reduce the barriers to achieve the C-H bond cleavage.

Mechanistic Studies on the Pd-Catalyzed Vinylation of Aryl Halides with Vinylalkoxysilanes in Water: The Effect of the Solvent and NaOH Promoter

The mechanism of the Pd-catalyzed vinylation of aryl halides with vinylalkoxysilanes in water has been studied using different catalytic precursors. The NaOH promoter converts the initial vinylalkoxysilane into a highly reactive water-soluble vinylsilanolate species. Similarly, deuterium-labeling experiments have shown that, irrespective of the catalytic precursor used, vinylation occurs exclusively at the CH vinylic functionality via a Heck reaction and not at the C-Si bond via a Hiyama cross-coupling. The involvement of a Heck mechanism is interpreted in terms of the reduced nucleophilicity of the base in water, which disfavors the transmetalation step. The Heck product (β-silylvinylarene) undergoes partial desilylation, with formation of a vinylarene, by three different routes: (a) hydrolytic desilylation by the aqueous solvent (only at high temperature); (b) transmetalation of the silyl olefin on the PdH Heck intermediate followed by reductive elimination of vinylarene; (c) reinsertion of the silyl olefin into the PdH bond of the Heck intermediate followed by β-Si syn-elimination. Both the Hiyama and Heck catalytic cycles and desilylation mechanisms b and c have been computationally evaluated for the [Pd(en)Cl2] precursor in water as solvent. The calculated Gibbs energy barriers support the reinsertion route proposed on the basis of the experimental results.

Methane Oxidation to Methanol Catalyzed by Cu-Oxo Clusters Stabilized in NU-1000 Metal–Organic Framework

Copper oxide clusters synthesized via atomic layer deposition on the nodes of the metal-organic framework (MOF) NU-1000 are active for oxidation of methane to methanol under mild reaction conditions. Analysis of chemical reactivity, in situ X-ray absorption spectroscopy, and density functional theory calculations are used to determine structure/activity relations in the Cu-NU-1000 catalytic system. The Cu-loaded MOF contained Cu-oxo clusters of a few Cu atoms. The Cu was present under ambient conditions as a mixture of ∼15% Cu+ and ∼85% Cu2+. The oxidation of methane on Cu-NU-1000 was accompanied by the reduction of 9% of the Cu in the catalyst from Cu2+ to Cu+. The products, methanol, dimethyl ether, and CO2, were desorbed with the passage of 10% water/He at 135 °C, giving a carbon selectivity for methane to methanol of 45-60%. Cu oxo clusters stabilized in NU-1000 provide an active, first generation MOF-based, selective methane oxidation catalyst.

The Transmetalation Process in Suzuki–Miyaura Reactions: Calculations Indicate Lower Barrier via Boronate Intermediate

Recent experimental reports have called into question the validity of the boronate mechanism (through a RB(OH)3− intermediate) for the transmetalation step in the Suzuki–Miyaura cross‐coupling, favoring instead the palladium hydroxo pathway (through an [LnPd(R′)(OH)] intermediate). Herein we report DFT calculations with the M06 functional performed on realistic model systems, including a combination of explicit solvent molecules along with a continuum method. These computational results support the boronate mechanism. The mechanistic proposal is shown to be compatible with the available experimental evidence.

Counteranion and Solvent Assistance in Ruthenium-Mediated Alkyne to Vinylidene Isomerizations

The complex [Cp*RuCl((i)Pr2PNHPy)] (1) reacts with 1-alkynes HC≡CR (R = COOMe, C6H4CF3) in dichloromethane furnishing the corresponding vinylidene complexes [Cp*Ru═C═CHR((i)Pr2PNHPy)]Cl (R = COOMe (2a-Cl), C6H4CF3 (2b-Cl)), whereas reaction of 1 with NaBPh4 in MeOH followed by addition of HC≡CR (R = COOMe, C6H4CF3) yields the metastable π-alkyne complexes [Cp*Ru(η(2)-HC≡CR)((i)Pr2PNHPy)][BPh4] (R = COOMe (3a-BPh4), C6H4CF3 (3b-BPh4)). The transformation of 3a-BPh4/3b-BPh4 into their respective vinylidene isomers in dichloromethane is very slow and requires hours to its completion. However, this process is accelerated by addition of LiCl in methanol solution. Reaction of 1 with HC≡CR (R = COOMe, C6H4CF3) in MeOH goes through the intermediacy of the π-alkyne complexes [Cp*Ru(η(2)-HC≡CR)((i)Pr2PNHPy)]Cl (R = COOMe (3a-Cl), C6H4CF3 (3b-Cl)), which rearrange to vinylidenes in minutes, i.e., much faster than their counterparts containing the [BPh4](-) anion. The kinetics of these isomerizations has been studied in solution by NMR. With the help of DFT studies, these observations have been interpreted in terms of chloride- and methanol-assisted hydrogen migrations. Calculations suggest participation of a hydrido-alkynyl intermediate in the process, in which the hydrogen atom can be transferred from the metal to the β-carbon by means of species with weak basic character acting as proton shuttles.

Ruthenium-Catalyzed Oxidative Coupling of Primary Amines with Internal Alkynes through C-H Bond Activation: Scope and Mechanistic Studies.

The oxidative coupling of primary amines with internal alkynes catalyzed by Ru complexes is presented as a general atom-economy methodology with a broad scope of applications in the synthesis of N-heterocycles. Reactions proceed through regioselective C-H bond activation in 15 minutes under microwave irradiation or in 24 hours with conventional heating. The synthesis of 2,3,5-substituted pyridines, benzo[h]isoquinolines, benzo[g]isoquinolines, 8,9-dihydro-benzo[de]quinoline, 5,6,7,8-tetrahydroisoquinolines, pyrido[3,4g]isoquinolines, and pyrido[4,3g]isoquinolines is achievable depending on the starting primary amine used. DFT calculations on a benzylamine substrate support a reaction mechanism that consists of acetate-assisted C-H bond activation, migratory-insertion, and C-N bond formation steps that involve 28-30 kcal mol(-1) . The computational study is extended to additional substrates, namely, 1-naphthylmethyl-, 2-methylallyl-, and 2-thiophenemethylamines.

Solution dynamics of agostic interactions in T-shaped Pt(II) complexes from ab initio molecular dynamics simulations

Transition metal complexes forming agostic interactions have been extensively surveyed. However, the dynamic behaviour of these interactions is less documented though it could be crucial in chemical processes. For this purpose, ab initio molecular dynamics simulations (AIMD) of some representative T-shaped Pt(II) complexes (quantum mechanics) have been performed in an explicit dichloromethane solvent (molecular mechanics). The dynamics of the agostic interaction in solution strongly depends on the complex, going from stiff to flexible on-off agostic interactions at the time scale of the simulations (about 15 ps). Such behaviour can only be observed by using AIMD methods in solution.

Presence versus Proximity: The Role of Pendant Amines in the Catalytic Hydrolysis of a Nerve Agent Simulant

Amino-functionalized zirconium-based metal-organic frameworks (MOFs) have shown unprecedented catalytic activity compared to non-functionalized analogues for hydrolysis of organophosphonate-based toxic chemicals. Importantly, the effect of the amino group on the catalytic activity is significantly higher in the case of UiO-66-NH2 , where the amino groups reside near the node, compared to UiO-67-m-NH2 , where they are directed away from the node. Herein, we show that the proximity of the amino group is crucial for fast catalytic activity towards hydrolysis of organophosphonate-based nerve agents. The generality of the observed amine-proximity-dictated catalytic activity has been tested on two different MOF systems which have different topology. DFT calculations reveal that amino groups on all the MOFs studied are not acting as Brønsted bases; instead they control the microsolvation environment at the Zr6 -node active site and therefore increase the overall catalytic rates.