Manuel Domínguez

A new approach to exploratory analysis of system dynamics using SOM. Applications to industrial processes

The self-organizing map (SOM) constitutes a powerful method for exploratory analysis of process data that is based on the so-called dimension reduction approach. The SOM algorithm defines a smooth non-linear mapping from a high-dimensional input space onto a low-dimensional output space (typically 2D) that preserves the most significant information about the input data distribution. This mapping can be used to obtain 2D representations (component planes, u-matrix, etc.) of the process variables that reveal the main static relationships, allowing to exploit available data and process-related knowledge in an efficient way for supervision and optimization purposes. In this work we present a complementary methodology to represent also the process dynamics in the SOM visualization, using maps in which every point represents a local dynamical behavior of the process and that, in addition, are consistent with the component planes of the process variables. The proposed methodology allows in this way to find relationships between the process variables and the process dynamics, opening important ways for the exploratory analysis of the dynamic behavior in non-linear and non-stationary processes. Experimental results from real data of two different industrial processes are also described, showing the possibilities of the proposed approach.

Remote laboratory of a quadruple tank process for learning in control engineering using different industrial controllers

Education in technological disciplines requires students to be always in contact with real systems, where they can apply their theoretical knowledge. These systems tend to be expensive and the high initial investment is returned after a long time, as the resource can only be used by a limited number of students during the on‐site practical classes. The use of remote laboratories, which allow students to access the system through the Internet, optimizes resources by providing access to a larger number of users at any time. In this article, we present a remote laboratory of a quadruple‐tank industrial scale model, with real industrial equipment. The students carry out control activities on the system through the Internet as they would do in a laboratory classroom. The remote laboratory architecture is based on a three layer (physical layer–server layer–client layer) whose middle layer consists of four servers: Web Server, Proxy Server, Database Server, and Control Server. In the Control server, a link application based on OPC (Ole for Process Control) standard to select different industrial controllers which are connected to the scale model simultaneously has been implemented. Since the application is based on a standard, this structure can be expanded easily with other industrial controllers from other manufacturers. The remote laboratory is used in automatic and control subjects from different Spanish universities. Surveys conducted among the students about the use of Laboratory show that they perceive an improvement of their learning using the lab.

Visual dynamic model based on self-organizing maps for supervision and fault detection in industrial processes

Visual data mining techniques have experienced a growing interest for processing and interpretation of the large amounts of multidimensional data available in current industrial processes. One of the approaches to visualize data is based on self-organizing maps (SOM), which define a projection of the input space onto a 2D or 3D space that can be used to obtain visual representations. Although these techniques have been usually applied to visualize static relations among the process variables, they have proven to be very useful to display dynamic features of the processes. In this work, an approach based on the SOM to model the dynamics of multivariable processes is presented. The proposed method identifies the process conditions (clusters) and the probabilities of transition among them, using the trajectory followed by the input data on the 2D visualization space. Furthermore, a new method of residual computation for fault detection and identification that uses the dynamic information provided by the model of transitions is proposed. The proposed method for modeling and fault identification has been applied to supervise a real industrial plant and the results are included.

Internet-based remote supervision of industrial processes using self-organizing maps

In upcoming years, the strategies for maintenance, traceability, management and operation of productive processes will demand the use of novel information and communication technologies. Supervisory systems in these new scenarios will have to be able to integrate large volumes of information and knowledge coming both from local and remote points of large processes. These systems will therefore require new tools for management and integration of information and knowledge. In this work, the authors present an internet-based remote supervision system of industrial processes that incorporates powerful data and knowledge visualization tools based on selforganizing maps (SOM). This architecture adds an intermediate layer (database) to the well-known client and server layers, that isolates the client part from the industrial process, allowing to incorporate the required data management and neural network processing tasks. Remote users have access to advanced information visualization tools based on SOM, including both static visualizations, such as component planes or distance maps, and dynamical ones, such as residuals and state trajectory, allowing the interpretation of knowledge extracted by the SOM as well as the analysis and detection of possible abnormal conditions. This architecture has been validated through the supervision of an industrial pilot plant. r 2006 Elsevier Ltd. All rights reserved.

Machine learning methods to forecast temperature in buildings

Efficient management of energy in buildings saves a very important amount of resources (both economic and technological). As a consequence, there is a very active research in this field. One of the keys of energy management is the prediction of the variables that directly affect building energy consumption and personal comfort. Among these variables, one can highlight the temperature in each room of a building. In this work we apply different machine learning techniques along with other classical ones for predicting the temperatures in different rooms. The obtained results demonstrate the validity of these techniques for predicting temperatures and, therefore, for the establishment of optimal policies of energy consumption.

Challenges and solutions in remote laboratories. Application to a remote laboratory of an electro-pneumatic classification cell

The field of remote laboratories has been developed over the years. These laboratories are valuable educational tools that allow students and faculty interact with real equipment through the Internet, as if they were physically in front of the system. When a remote laboratory is developed, many technical difficulties are found, mainly with respect to the links between the different elements such as physical system, database and clients. In this work, we analyze the challenges and propose approaches to develop remote laboratories that achieve flexibility, scalability and greater educational value. In particular, we present a remote laboratory for automatic control, which includes an electro-pneumatic classification cell. The architecture of the laboratory is based on the three-tier architecture (physical system layer, server layer and client layer). The client layer has been implemented with web standards such as HTML5, AJAX and CSS3, the clients interact with the system using a content management system and the communication interface between the physical system and the database uses a middleware based on OPC (Ole for Process Control). Engineering students have regularly used the remote laboratory and they have evaluated it through surveys. We review the main challenges of remote laboratories and propose solutions.We present a middleware based on OPC for the communication with the physical systems.We present client rich applications based on JavaScript and HTML5.We test the technological platform with the addition of an electro-pneumatic classification cell.We propose practical tasks and evaluate their educational value through feedback from students.

A Virtual Laboratory of D.C. Motors for Learning Control Theory

The application of Information and Communication Technologies to education has promoted the development of new educational methodologies that lead to new learning spaces. A particular case, especially in the engineering field, is that of Virtual and Remote Laboratories through the Internet. These are powerful tools that let the student operate on simulated and/or real technological equipment with the only requirements of a PC, a web browser and an Internet connection. In this work, we present a virtual laboratory of an educational set for d.c. motor control, Feedback MS-150, which is widely used as practical equipment in laboratories of introductory control theory courses. A simulation of all the functionalities of the modular equipment was developed in Easy Java Simulation (EJS). The simulation was included in the Remote Laboratory of Automatic Control at the University of León (LRA-ULE), which is managed by a Drupal content management system. Engineering students have regularly used the virtual laboratory and have evaluated it through surveys.

Entornos de experimentación para la Enseñanza de Conceptos Básicos de Modelado y Control

This work presents two experimentation environments as part of educational project called AutomatL@bs. A brief description of both environment is given remarking the advantages on interactivity, virtual and remote labs, and web-based collaborative environments. Furthermore, the main teaching activities and tasks to perform with these environments are presented to be used in basic courses on modelling and control. Finally, some experiences, which have been done using these two environments, are analyzed and discussed.

Modeling the best practices towards the adaptation to the European credit transfer system in technical degrees within the IEEE ES chapter

Several Spanish universities have started their process of adaptation towards a common educational space as a first stage towards the implementation of the credit system as established by the regulation prior to 2010. These universities have developed several highly- illuminating experiences which could be useful to those teachers and institutions who have no previous references and models to develop new experiences of ECTS adaptation. To help these scholars and universities this paper reports on a project that has been recently completed and which has been supported by the Spanish Government and by the participation to the Spanish Chapter of IEEE Education Society. More specifically, the paper provides details about the management of the project, namely, details about the contributions of its three working groups, as well as the different tasks carried out and their monitoring. The paper also describes the results obtained with the project and provides assessment on previous pilot experiences presented by Spanish university teachers at Engineering Education Conferences as well as on the experiences compiled through the projects Web site.

Analysis of electricity consumption profiles in public buildings with dimensionality reduction techniques

The analysis of the daily electricity consumption profile of a building and its correlation with environmental factors makes it possible to examine and estimate its electricity demand. As an alternative to the traditional correlation analysis, a new approach is proposed to provide a detailed and visual analysis of the correlations between consumption and environmental variables. Since consumption profiles can be characterized by many components, the input space is high dimensional. For that reason, it is necessary to apply dimensionality reduction techniques that enable a projection of these data onto an easily interpretable 2D space. In this paper, several dimensionality reduction techniques are tested in order to determine the most appropriate one for the stated purpose. Later, the proposed approach uses the chosen algorithm to analyze the influence of the environmental variables on the electricity consumption in public buildings located at the University of Leon. Finally, electricity profiles from all buildings are compared with regard to two aspects, the magnitude and dynamics of the consumption.