Manuel Quintanilla

Effects of multilevel phase masks on interpixel cross talk in digital holographic storage.

We study the interpixel cross talk introduced to digital holographic data storage by use of a multilevel phase mask at the data-input plane. We evaluate numerically the intensity distribution at the output detector for Fourier plane hologram storage in a limited-aperture storage medium. Only the effect at an output pixel of interpixel cross talk from the four horizontal and vertical neighboring pixels is considered, permitting systematic evaluation of all possibilities. For random two-level and pseudorandom six-level phase masks, the influence of the pixel fill factor, as well as the aperture size of the storage medium, is studied. Our simulations show that, for a given aperture size, a random two-level mask is more susceptible to interpixel cross talk than is a pseudorandom six-level mask. Decreasing the pixel fill factor below 94% with a pseudorandom six-level phase mask makes it theoretically possible to have a system with no errors from interpixel cross talk if one particular 5-pixel pattern is forbidden through modulation coding. Reducing the input fill factor below 85% means that no patterns need to be excluded.

DIGITAL SPECKLE-PATTERN INTERFEROMETRY AS A FULL-FIELD FLUID-VELOCIMETRY TECHNIQUE

We present a novel fluid-velocimetry technique based on speckle interferometry. The light scattered from an illuminated plane is recorded with a CCD camera at the same time as a speckled reference beam. Substraction of two nonsimultaneous frames provides information about the velocity field for an out-of-plane component. An application to a Rayleigh-Bénard convective flow is given.

Characterization of transmission volume holographic gratings recorded in Slavich PFG04 dichromated gelatin plates

We characterize Slavich PFG-04 dichromated gelatin plates to make transmission volume holographic elements recorded with a 532 nm laser source, obtaining high efficiency gratings with a high signal to noise ratio. The linear dynamic range of the material is studied by measuring the efficiency of multiplexed gratings. Results obtained are applied to the recording of holographic elements with high efficiency when they are illuminated with a 800 nm light source.

Holographic interferometry versus stereoscopic PIV for measuring out-of-plane velocity fields in confined flows

This paper describes and compares holographic interferometry and stereoscopic PIV as techniques for measuring out-of-plane velocity fields. Most relevant aspects in both techniques are revised. Special attention is paid to the specific problems encountered in confined flows. The presence of walls limiting the flow prevents the use of some optical configurations for the photographic and holographic recordings. Several optical configurations have been analysed. Experiments have been carried out in a small Rayleigh-Benard convective cell. Results obtained for the out-of-plane component with both techniques are compared and discussed.

Silver halide sensitized gelatin process effects in holographic lenses recorded on Slavich PFG-01 plates

In this work we study the feasibility of using silver halide sensitized gelatin based on PFG-01 (Slavich) emulsions to construct uniaxial compound lenses. This processing is able to introduce variations in the thickness and refractive index of the emulsion. We prove that these changes are not sufficient to provide the observed variations in Bragg conditions in the reconstruction and that a shear-type effect must exist to explain the performance of processed emulsions. We study the characteristics of a compound lens, obtaining acceptable image quality, good resolution, and the typical field limitation of volume holographic elements.

Velocity measurements in a convective flow by holographic interferometry

A holographic interferometry technique has been developed that can be used to measure the three components of the velocity field in a whole plane of a fluid flow simultaneously. The light scattered from an illuminated fluid plane is recorded on a hologram. Several interferograms are obtained in the reconstruction of the hologram. Each interferogram is automatically analyzed and produces quantitative information about one velocity component. Parameters that affect the quality of the interferograms are analyzed. The technique is demonstrated in a Rayleigh-Bénard convective flow. Holographic interferometry and particle image velocimetry techniques are compared.

HOE recording with non-spherical waves

A general study of third-order aberrations of aspheric holographic optical elements is described, including the effect of wavefront deviation from construction waves on the total aberration. Third-order aberration coefficients for a plane parallel glass plate referred to a general case in which the optical axes are not normal to the plate surfaces are calculated. This theoretical development is used to optimize the glass plate substrate aberration contribution in a holographic compound system used for optical image formation.

The development of full field interferometric methods for fluid velocimetry

Abstract The development of full field interferometry as a velocimetry technique in experimental fluid mechanics from its inception in 1977 to the present is discussed. In 1977, holographic interferometry (HI) was applied for the first time to measure the velocity field in a liquid flow. It was not until 1998 that the first application to a gaseous flow was reported. The only kind of speckle interferometry that has been applied to measure velocity fields so far is digital speckle pattern interferometry (DSPI). It was in 1999 that DSPI was demonstrated both in a liquid and a gaseous flow.

Field improvement in a uniaxial centered lens composed of two stacked-volume holographic elements

Arrangements are described for the recording of volume holograms with two sections that, when stacked together, work as uniaxial centered lenses and allow one to solve the problem of angular selectivity in the imaging of wide objects. The performance of such systems is examined qualitatively, and suggestions aimed at improving these designs are proposed.

Partitioned-field uniaxial holographic lenses

The efficiency and aberration of partitioned-field uniaxial volume holographic compound lenses are theoretically and experimentally studied. These systems increase the image fields of holographic volume lenses, limited by the angular selectivity that is typical of these elements. At the same time, working with uniaxial systems has led to a decrease in aberration because two recording points (that behave as aberration-free points) are used. The extension of the image field is experimentally proved.