Manuela Scarselli

Electronic and optoelectronic nano-devices based on carbon nanotubes

The discovery and understanding of nanoscale phenomena and the assembly of nanostructures into different devices are among the most promising fields of material science research. In this scenario, carbon nanostructures have a special role since, in having only one chemical element, they allow physical properties to be calculated with high precision for comparison with experiment. Carbon nanostructures, and carbon nanotubes (CNTs) in particular, have such remarkable electronic and structural properties that they are used as active building blocks for a large variety of nanoscale devices. We review here the latest advances in research involving carbon nanotubes as active components in electronic and optoelectronic nano-devices. Opportunities for future research are also identified.

Experimental imaging of silicon nanotubes

Transmission electron microscopy (TEM), electron energy loss near edge structures (EELNES) and scanning tunneling microscopy (STM) were used to distinguish silicon nanotubes (SiNT) among the reaction products of a gas phase condensation synthesis. TEM images exhibit the tubular nature with a well-defined wall. The EELNES spectra performed on each single nanotube show that they are constituted by nonoxidized silicon atoms. STM images show that they have diameter ranging from 2 to 35 nm, have an atomic arrangement compatible with a puckered structure and different chiralities. Moreover, the I-V curves showed that SiNT can be semiconducting as well as metallic in character.

Regioregular poly(3-hexyl-thiophene) helical self-organization on carbon nanotubes

Mixtures of regioregular poly(3-hexyl-thiophene) (rrP3HT) and multiwall carbon nanotubes have been investigated by scanning tunneling microscopy in ultrahigh vacuum. Carbon nanotubes covered by rrP3HT have been imaged and analyzed, providing a clear evidence that this polymer self-assembles on the nanotube surface following geometrical constraints and adapting its equilibrium chain-to-chain distance. Largely spaced covered nanotubes have been analyzed to investigate the role played by nanotube chirality in the polymer wrapping, evidencing strong rrP3HT interactions along well defined directions.

Light harvesting with multiwall carbon nanotube/silicon heterojunctions

We report on a significant photocurrent generation from a planar device obtained by coating a bare n doped silicon substrate with a random network of multiwall carbon nanotubes (MWCNTs). This MWCNT/n-Si hybrid device exhibits an incident photon to current efficiency reaching up to 34% at 670 nm. We also show that MWCNTs covering a quartz substrate still exhibit photocurrent, though well below than that of the MWCNTs coating the silicon substrate. These results suggest that MWCNTs are able to generate photocurrent and that the silicon substrate plays a fundamental role in our planar device. The former effect is particularly interesting because MWCNTs are generally known to mimic the electronic properties of graphite, which does not present any photocurrent generation. On the basis of theoretical calculations revealing a weak metallic character for MWCNTs, we suggest that both metallic and semiconducting nanotubes are able to generate e-h pairs upon illumination. This can be ascribed to the presence of van Hove singularities in the density of states of each single wall carbon nanotube constituting the MWCNT and to the low density of electrons at the Fermi level. Finally, we suggest that though both MWCNTs and Si substrate are involved in the photocurrent generation process, MWCNT film mainly acts as a semitransparent electrode in our silicon-based device.

Effect of coiling on the electronic properties along single-wall carbon nanotubes

Straight and coiled single-wall carbon nanotubes (SWCNTs) synthesized by laser vaporization were dispersed on highly oriented pyrolitic graphite. Their morphology and electrical properties were investigated by scanning tunneling microscopy (STM). STM images revealed that the SWCNTs (either straight or coiled) often self-organize into bundles of two or more tubes and are rarely found alone. The conductance measured along a periodically coiled CNT was found to increase at locations where the CNT is squeezed, while it decreases significantly in unsqueezed regions characterized by an unperturbed hexagonal network. This provides experimental evidence of significant conductance modulation along a one-dimensional system on the nanometer scale.

Super-Hydrophobic Multi-Walled Carbon Nanotube Coatings for Stainless Steel

We have taken advantage of the native surface roughness and the iron content of AISI 316 stainless steel to directly grow multi-walled carbon nanotube (MWCNT) random networks by chemical vapor deposition (CVD) at low-temperature (1000°C) without the addition of any external catalysts or time-consuming pre-treatments. In this way, super-hydrophobic MWCNT films on stainless steel sheets were obtained, exhibiting high contact angle values (154°C) and high adhesion force (high contact angle hysteresis). Furthermore, the investigation of MWCNT films with scanning electron microscopy (SEM) reveals a two-fold hierarchical morphology of the MWCNT random networks made of hydrophilic carbonaceous nanostructures on the tip of hydrophobic MWCNTs. Owing to the Salvinia effect, the hydrophobic and hydrophilic composite surface of the MWCNT films supplies a stationary super-hydrophobic coating for conductive stainless steel. This biomimetical inspired surface not only may prevent corrosion and fouling, but also could provide low friction and drag reduction.

Multi-Fractal Hierarchy of Single-Walled Carbon Nanotube Hydrophobic Coatings

A hierarchical structure is an assembly with a multi-scale morphology and with a large and accessible surface area. Recent advances in nanomaterial science have made increasingly possible the design of hierarchical surfaces with specific and tunable properties. Here, we report the fractal analysis of hierarchical single-walled carbon nanotube (SWCNT) films realized by a simple, rapid, reproducible, and inexpensive filtration process from an aqueous dispersion, then deposited by drytransfer printing method on several substrates, at room temperature. Furthermore, by varying the thickness of carbon nanotube random networks, it is possible tailoring their wettability due to capillary phenomena in the porous films. Moreover, in order to describe the wetting properties of such surfaces, we introduce a two-dimensional extension of the Wenzel-Cassie-Baxter theory. The hierarchical surface roughness of SWCNT coatings coupled with their exceptional and tunable optical and electrical properties provide an ideal hydrophobic composite surface for a new class of optoelectronic and nanofluidic devices.

Photocurrent generation in random networks of multiwall-carbon-nanotubes grown by an “all-laser” process

We report photocurrent generation in entangled networks of multiwall-carbon nanotubes (MWCNTs) grown on TiN/Si substrates by an all-laser process. By integrating these MWCNTs into planar devices, we demonstrate that they generate photocurrent over all the visible and near-ultraviolet range, with maximum efficiency around 420 nm. Photocurrent is obtained even at zero applied voltage, pointing to a true photovoltaic (PV) effect. The extracted photocurrent as a function of applied voltage exhibits nonlinear behavior for voltages ≥2 V, suggesting that the devices do not behave as pure photoresistances. Other mechanisms (e.g., Schottky barriers imbalance) are invoked to describe current flow in these PV devices.

Poly(3-hexyl-thiophene) coil-wrapped single wall carbon nanotube investigated by scanning tunneling spectroscopy

Scanning tunneling spectroscopy was performed on a (15,0) single wall carbon nanotube partially wrapped by poly(3-hexyl-thiophene). On the bare nanotube section, the local density of states is in good agreement with the theoretical model based on local density approximation and remarkably is not perturbed by the polymer wrapping. On the coiled section, a rectifying current-voltage characteristic has been observed along with the charge transfer from the polymer to the nanotube. The electron transfer from poly(3-hexyl-thiophene) to metallic nanotube was previously theoretically proposed and contributes to the presence of the Schottky barrier at the interface responsible for the rectifying behavior.

3D meshes of carbon nanotubes guide functional reconnection of segregated spinal explants

Three-dimensional carbon nanotube frameworks favor spinal cord explant rewiring of motor outputs. In modern neuroscience, significant progress in developing structural scaffolds integrated with the brain is provided by the increasing use of nanomaterials. We show that a multiwalled carbon nanotube self-standing framework, consisting of a three-dimensional (3D) mesh of interconnected, conductive, pure carbon nanotubes, can guide the formation of neural webs in vitro where the spontaneous regrowth of neurite bundles is molded into a dense random net. This morphology of the fiber regrowth shaped by the 3D structure supports the successful reconnection of segregated spinal cord segments. We further observed in vivo the adaptability of these 3D devices in a healthy physiological environment. Our study shows that 3D artificial scaffolds may drive local rewiring in vitro and hold great potential for the development of future in vivo interfaces.