Mar Puyol

Continuous flow synthesis of nanoparticles using ceramic microfluidic devices

A microfluidic system based on the low-temperature co-fired ceramics technology (LTCC) is proposed to reproducibly carry out a simple one-phase synthesis and functionalization of monodispersed gold nanoparticles. It takes advantage of the LTCC technology, offering a fast prototyping without the need to use sophisticated facilities, reducing significantly the cost and production time of microfluidic systems. Some other interesting advantages of the ceramic materials compared to glass, silicon or polymers are their versatility and chemical resistivity. The technology enables the construction of multilayered systems, which can integrate other mechanical, electronic and fluidic components in a single substrate. This approach allows rapid, easy, low cost and automated synthesis of the gold colloidal, thus it becomes a useful approach in the progression from laboratory scale to pilot-line scale processes, which is currently demanded.

Microreactor with integrated temperature control for the synthesis of CdSe nanocrystals

The recent needs in the nanosciences field have promoted the interest towards the development of miniaturized and highly integrated devices able to improve and automate the current processes associated with efficient nanomaterials production. Herein, a green tape based microfluidic system to perform high temperature controlled synthetic reactions of nanocrystals is presented. The device, which integrates both the microfluidics and a thermally controlled platform, was applied to the automated and continuous synthesis of CdSe quantum dots. Since temperature can be accurately regulated as required, size-controlled and reproducible quantum dots could be obtained by regulating this parameter and the molar ratio of precursors. The obtained nanocrystals were characterized by UV-vis and fluorescence spectrophotometry. The band width of the emission peaks obtained indicates a narrow size distribution of the nanocrystals, which confirms the uniform temperature profile applied for each synthetic process, being the optimum temperature at 270 °C (full width at half maximum = 40 nm). This approach allows a temperature controlled, easy, low cost and automated method to produce quantum dots in organic media, enhancing its application from laboratory-scale to pilot-line scale processes.

Vortex configuration flow cell based on low-temperature cofired ceramics as a compact chemiluminescence microsystem.

The integration of optical detection methods in continuous flow microsystems can highly extend their range of application, as long as some negative effects derived from their scaling down can be minimized. Downsizing affects to a greater extent the sensitivity of systems based on absorbance measurements than the sensitivity of those based on emission ones. However, a careful design of the instrumental setup is needed to maintain the analytical features in both cases. In this work, we present the construction and evaluation of a simple miniaturized optical system, which integrates a novel flow cell configuration to carry out chemiluminescence (CL) measurements using a simple photodiode. It consists of a micromixer based on a vortex structure, which has been constructed by means of the low-temperature cofired ceramics (LTCC) technology. This mixer not only efficiently promotes the CL reaction due to the generated high turbulence but also allows the detection to be carried out in the same area, avoiding intensity signal losses. As a demonstration, a flow injection system has been designed and optimized for the detection of cobalt(II) in water samples. It shows a linear response between 2 and 20 microM with a correlation of r > 0.993, a limit of detection of 1.1 microM, a repeatability of RSD = 12.4%, and an analysis time of 17 s. These results demonstrate the suitability of the proposal to the determination of compounds involved in CL reactions by means of an easily constructed versatile device based on low-cost instrumentation.

Analysis of optochemical absorbance sensors based on bidimensional planar ARROW microoptics

Abstract A new approach for developing absorbance optochemical sensors is presented in this paper. It is based on a planar microoptic circuit where an optochemically active membrane, which responds selectively to a compound, is deposited in the device, yielding a part of the guiding planar structure. Light is propagated through the membrane, which changes its spectral absorption properties and controls the selectivity of the measurements by means of several immobilised compounds. This way, high sensitivity of the device can be easily obtained due to relatively long light paths through the membrane, and low response times can be achieved as the analyte diffusion occurs perpendicularly to the light path and through a thin membrane. Experimental results on measurements of the concentration of a specific ion in solution using the fabricated sensors are also presented.

Integrated Photonic Nanofences: Combining Subwavelength Waveguides with an Enhanced Evanescent Field for Sensing Applications

Photonic nanofences consisting of high aspect ratio polymeric optical subwavelength waveguides have been developed for their application into photonic sensing devices. They are up to millimeter long arrays of 250 nm wide and 6 μm high ridges produced by an advanced lithography process on a silicon substrate enabling their straightforward integration into complex photonic circuits. Both simulations and experimental results show that the overlap of the evanescent fields propagating from each photonic nanofence allows for the formation of an effective waveguide that confines the overall evanescent field within its limits. This permits a high interaction with the surrounding medium which can be larger than 90% of the total guided light intensity (approximately 20000 times larger than the evanescent field of a standard waveguide with equivalent dimensions). In this work, we not only investigate the photonic properties of these structures but also demonstrate their successful integration into a photonic sensor. An absorbance-based sensor for the determination of lead in water samples is therefore achieved by the combination of the photonic nanofences with an ion-sensitive optical membrane. The experimental results for lead detection in water show a sensitivity of 0.102 AU/decade, and a linear range between 10(-6) M and 10(-2) M Pb(II). A detection limit as low as 7.3 nM has been calculated according to IUPAC for a signal-to-noise ratio of 3.

Biparametric potentiometric analytical microsystem for nitrate and potassium monitoring in water recycling processes for manned space missions.

The construction and evaluation of a Low Temperature Co-fired Ceramics (LTCC)-based continuous flow potentiometric microanalyzer prototype to simultaneously monitor the presence of two ions (potassium and nitrate) in samples from the water recycling process for future manned space missions is presented. The microsystem integrates microfluidics and the detection system in a single substrate and it is smaller than a credit card. The detection system is based on two ion-selective electrodes (ISEs), which are built using all-solid state nitrate and potassium polymeric membranes, and a screen-printed Ag/AgCl reference electrode. The obtained analytical features after the optimization of the microfluidic design and hydrodynamics are a linear range from 10 to 1000 mg L(-1) and from 1.9 to 155 mg L(-1) and a detection limit of 9.56 mg L(-1) and 0.81 mg L(-1) for nitrate and potassium ions respectively.

Potentiometric analytical microsystem based on the integration of a gas-diffusion step for on-line ammonium determination in water recycling processes in manned space missions.

The design, construction and evaluation of a versatile cyclic olefin copolymer (COC)-based continuous flow potentiometric microanalyzer to monitor the presence of ammonium ion in recycling water processes for future manned space missions is presented. The microsystem integrates microfluidics, a gas-diffusion module and a detection system in a single substrate. The gas-diffusion module was integrated by a hydrophobic polyvinylidene fluoride (PVDF) membrane. The potentiometric detection system is based on an all-solid state ammonium selective electrode and a screen-printed Ag/AgCl reference electrode. The analytical features provided by the analytical microsystem after the optimization process were a linear range from 0.15 to 500 mg L(-1) and a detection limit of 0.07 ± 0.01 mg L(-1). Nevertheless, the operational features can be easily adapted to other applications through the modification of the hydrodynamic variables of the microfluidic platform.

Dual-wavelength measurement system for absorbance chemical sensing

A novel compact dual-wavelength measurement system for absorbance chemical sensing incorporating digital lock-in amplifiers is reported. Its main innovation is the introduction of a reference wavelength to correct the possible non-specific optical changes of the system. The performance of the instrumentation has been tested on a laboratory setup and with integrated optical absorbance sensors.

Absorbance-Based Integrated Optical Sensors

Optochemical sensors have had a huge expansion and in recent years interesting sorts of optical sensor have been developed which make use of the integrated circuit microelectronic technology and the optical technological advances achieved in the telecommunications industry. These devices are based on optical fibers, planar waveguides or the combination of both supports as light-guiding structures and offer an enhanced performance thanks to a miniaturized size, a feasible mass production at low cost, the possibility to measure at large distances and the capability of reaching places hard to access for the in situ monitoring of environmental or medical parameters. In this chapter, we provide an overall view of integrated chemical sensors based on absorbance measurements, describing their main characteristics, advantages and drawbacks. In order to focus on these types of devices, first of all, a brief classification is given, in terms of the interaction mechanisms and the reactive phases or membranes that are involved in the response, and the radiation transmission medium. Next, different waveguide configurations are briefly described because of to the relevancy of these structures as the main constituent of integrated optodes and, finally, some absorbance-based integrated sensors are detailed.

Rapid Prototyping of a Cyclic Olefin Copolymer Microfluidic Device for Automated Oocyte Culturing

Assisted reproductive technology (ART) can benefit from the features of microfluidic technologies, such as the automation of time-consuming labor-intensive procedures, the possibility to mimic in vivo environments, and the miniaturization of the required equipment. To date, most of the proposed approaches are based on polydimethylsiloxane (PDMS) as platform substrate material due to its widespread use in academia, despite certain disadvantages, such as the elevated cost of mass production. Herein, we present a rapid fabrication process for a cyclic olefin copolymer (COC) monolithic microfluidic device combining hot embossing—using a low-temperature cofired ceramic (LTCC) master—and micromilling. The microfluidic device was suitable for trapping and maturation of bovine oocytes, which were further studied to determine their ability to be fertilized. Furthermore, another COC microfluidic device was fabricated to store sperm and assess its quality parameters over time. The study herein presented demonstrates a good biocompatibility of the COC when working with gametes, and it exhibits certain advantages, such as the nonabsorption of small molecules, gas impermeability, and low fabrication costs, all at the prototyping and mass production scale, thus taking a step further toward fully automated microfluidic devices in ART.