Marc D. Walter

Monodisperse Antimony Nanocrystals for High-Rate Li-ion and Na-ion Battery Anodes: Nano versus Bulk

We report colloidal synthesis of antimony (Sb) nanocrystals with mean size tunable in the 10-20 nm range and with narrow size distributions of 7-11%. In comparison to microcrystalline Sb, 10 and 20 nm Sb nanocrystals exhibit enhanced rate-capability and higher cycling stability as anode materials in rechargeable Li-ion and Na-ion batteries. All three particle sizes of Sb possess high and similar Li-ion and Na-ion charge storage capacities of 580-640 mAh g(-1) at moderate charging/discharging current densities of 0.5-1C (1C-rate is 660 mA g(-1)). At all C-rates (0.5-20C, e.g. current densities of 0.33-13.2 Ag(1-)), capacities of 20 nm Sb particles are systematically better than for both 10 nm and bulk Sb. At 20C-rates, retention of charge storage capacities by 10 and 20 nm Sb nanocrystals can reach 78-85% of the low-rate value, indicating that rate capability of Sb nanostructures can be comparable to the best Li-ion intercalation anodes and is so far unprecedented for Na-ion storage.

Monodisperse and Inorganically Capped Sn and Sn/SnO2 Nanocrystals for High-Performance Li-Ion Battery Anodes

We report a facile synthesis of highly monodisperse colloidal Sn and Sn/SnO2 nanocrystals with mean sizes tunable over the range 9-23 nm and size distributions below 10%. For testing the utility of Sn/SnO2 nanocrystals as an active anode material in Li-ion batteries, a simple ligand-exchange procedure using inorganic capping ligands was applied to facilitate electronic connectivity within the components of the nanocrystalline electrode. Electrochemical measurements demonstrated that 10 nm Sn/SnO2 nanocrystals enable high Li insertion/removal cycling stability, in striking contrast to commercial 100-150 nm powders of Sn and SnO2. In particular, reversible Li-storage capacities above 700 mA h g(-1) were obtained after 100 cycles of deep charging (0.005-2 V) at a relatively high current of 1000 mA h g(-1).

Phosphinite-Iminopyridine Iron Catalysts for Chemoselective Alkene Hydrosilylation

A series of new pincer iron complexes with electron-donating phosphinite-iminopyridine (PNN) ligands has been prepared and characterized. These iron compounds are efficient and selective catalysts for the anti-Markovnikov alkene hydrosilylation of primary, secondary, and tertiary silanes. More importantly, the system exhibits unprecedented functional group tolerance with reactive groups such as ketones, esters, and amides. Furthermore, the iron-catalyzed alkene hydrosilylation was successfully applied to the synthesis of a valuable insecticide, silafluofen. The electronic properties and structures of the iron complexes have been studied by spectroscopies and computational methods. Overall, the iron catalysts may provide a low-cost and environmentally benign alternative to currently employed precious metal systems for alkene hydrosilylation.

Thorium Oxo and Sulfido Metallocenes: Synthesis, Structure, Reactivity, and Computational Studies

The synthesis, structure, and reactivity of thorium oxo and sulfido metallocenes have been comprehensively studied. Heating of an equimolar mixture of the dimethyl metallocene [η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)](2)ThMe(2) (2) and the bis-amide metallocene [η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)](2)Th(NH-p-tolyl)(2) (3) in refluxing toluene results in the base-free imido thorium metallocene, [η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)](2)Th═N(p-tolyl) (4), which is a useful precursor for the preparation of oxo and sulfido thorium metallocenes [η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)](2)Th═E (E = O (5) and S (15)) by cycloaddition-elimination reaction with Ph(2)C═E (E = O, S) or CS(2). The oxo metallocene 5 acts as a nucleophile toward alkylsilyl halides, while sulfido metallocene 15 does not. The oxo metallocene 5 and sulfido metallocene 15 undergo a [2 + 2] cycloaddition reaction with Ph(2)CO, CS(2), or Ph(2)CS, but they show no reactivity with alkynes. Density functional theory (DFT) studies provide insights into the subtle interplay between steric and electronic effects and rationalize the experimentally observed reactivity patterns. A comparison between Th, U, and group 4 elements shows that Th(4+) behaves more like an actinide than a transition metal.

Decamethylytterbocene complexes of bipyridines and diazabutadienes: multiconfigurational ground states and open-shell singlet formation.

Partial ytterbium f-orbital occupancy (i.e., intermediate valence) and open-shell singlet formation are established for a variety of bipyridine and diazabutadiene adducts with decamethylytterbocene, (C(5)Me(5))(2)Yb, abbreviated as Cp*(2)Yb. Data used to support this claim include ytterbium valence measurements using Yb L(III)-edge X-ray absorption near-edge structure spectroscopy, magnetic susceptibility, and complete active space self-consistent field (CASSCF) multiconfigurational calculations, as well as structural measurements compared to density functional theory calculations. The CASSCF calculations indicate that the intermediate valence is the result of a multiconfigurational ground-state wave function that has both an open-shell singlet f(13)(pi*)(1), where pi* is the lowest unoccupied molecular orbital of the bipyridine or diazabutadiene ligands, and a closed-shell singlet f(14) component. A number of other competing theories for the unusual magnetism in these materials are ruled out by the lack of temperature dependence of the measured intermediate valence. These results have implications for understanding chemical bonding not only in organolanthanide complexes but also for f-element chemistry in general, as well as understanding magnetic interactions in nanoparticles and devices.

A Base‐Free Thorium–Terminal‐Imido Metallocene: Synthesis, Structure, and Reactivity

The synthesis, structure, and reactivity of a base-free thorium terminal-imido metallocene have been comprehensively studied. Treatment of thorium metallocenes [{η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)}(2)ThMe(2)] and [{η(5)-1,3-(Me(3)C)(2)C(5)H(3)}(2)ThMe(2)] with RNH(2) gives diamides [{η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)}(2)Th(NHR)(2)] (R=Me (7), p-tolyl (8)) and [{η(5)-1,3-(Me(3)C)(2)C(5)H(3)}(2)Th(NH-p-tolyl)(2)] (9), respectively. Diamides 7 and 9 do not eliminate methylamine or p-toluidine, but sublime without decomposition at 150 °C under vacuum (0.01 mmHg), whereas diamide 8 is converted at 140 °C/0.01 mmHg into the primary amine p-tolyl-NH(2) and [{η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)}(2)Th=N(p-tolyl)] (10), which may be isolated in pure form. Imido metallocene 10 does not react with electrophiles such as alkylsilyl halides; however, it reacts with electron-rich or unsaturated reagents. For example, reaction of 10 with sulfur affords the metallacycle [{η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)}(2)Th{N(p-tolyl)S-S}]. Imido 10 is an important intermediate in the catalytic hydroamination of internal alkynes, and an efficient catalyst for the trimerization of PhCN. Density functional theory (DFT) studies provide a detailed understanding of the experimentally observed reactivity patterns.

Intermediate-Valence Tautomerism in Decamethylytterbocene Complexes of Methyl-Substituted Bipyridines

Multiconfigurational, intermediate valent ground states are established in several methyl-substituted bipyridine complexes of bis(pentamethylcyclopentadienyl)ytterbium, Cp2*Yb (Me(x)-bipy). In contrast to Cp2*Yb(bipy) and other substituted-bipy complexes, the nature of both the ground state and the first excited state are altered by changing the position of the methyl or dimethyl substitutions on the bipyridine rings. In particular, certain substitutions result in multiconfigurational, intermediate valent open-shell singlet states in both the ground state and the first excited state. These conclusions are reached after consideration of single-crystal X-ray diffraction (XRD), the temperature dependence of X-ray absorption near-edge structure (XANES), extended X-ray absorption fine-structure (EXAFS), and magnetic susceptibility data, and are supported by CASSCF-MP2 calculations. These results place the various Cp2*Yb(bipy) complexes in a new tautomeric class, that is, intermediate-valence tautomers.

Unraveling the Core–Shell Structure of Ligand-Capped Sn/SnOx Nanoparticles by Surface-Enhanced Nuclear Magnetic Resonance, Mössbauer, and X-ray Absorption Spectroscopies

A particularly difficult challenge in the chemistry of nanomaterials is the detailed structural and chemical analysis of multicomponent nano-objects. This is especially true for the determination of spatially resolved information. In this study, we demonstrate that dynamic nuclear polarization surface-enhanced solid-state NMR spectroscopy (DNP-SENS), which provides selective and enhanced NMR signal collection from the (near) surface regions of a sample, can be used to resolve the core-shell structure of a nanoparticle. Li-ion anode materials, monodisperse 10-20 nm large tin nanoparticles covered with a ∼3 nm thick layer of native oxides, were used in this case study. DNP-SENS selectively enhanced the weak 119Sn NMR signal of the amorphous surface SnO2 layer. Mössbauer and X-ray absorption spectroscopies identified a subsurface SnO phase and quantified the atomic fractions of both oxides. Finally, temperature-dependent X-ray diffraction measurements were used to probe the metallic β-Sn core and indicated that even after 8 months of storage at 255 K there are no signs of conversion of the metallic β-Sn core into a brittle semiconducting α-phase, a phase transition which normally occurs in bulk tin at 286 K (13 °C). Taken together, these results indicate that Sn/SnOx nanoparticles have core/shell1/shell2 structure of Sn/SnO/SnO2 phases. The study suggests that DNP-SENS experiments can be carried on many types of uniform colloidal nanomaterials containing NMR-active nuclei, in the presence of either hydrophilic (ion-capped surfaces) or hydrophobic (capping ligands with long hydrocarbon chains) surface functionalities.

γ-Agostic Species as Key Intermediates in the Vinyl Addition Polymerization of Norbornene with Cationic (allyl)Pd Catalysts: Synthesis and Mechanistic Insights

Several cationic (allyl)Pd(II) complexes were synthesized and shown to be highly active for (2,3)-vinyl addition polymerization of norbornene (NB) to yield polymers with low molecular weight distributions (MWDs) ranging from 1.2-1.4. Despite the low MWDs, slow initiation was followed by rapid propagation preventing molecular weight control of the poly(norbornene). Several intermediates in these polymerizations initiated with [(2-R-allyl)Pd(mesitylene)](+) complexes were fully characterized (NMR and X-ray diffraction). Consistent with previous observations the allyl and NB units couple in cis-exo fashion to yield a sigma,pi-complex capped by mesitylene. Mesitylene is readily displaced by NB to form an agostic intermediate in which NB acts as a bidentate ligand and binds to the cationic Pd center via the pi-system and a gamma-agostic interaction with the syn hydrogen at C7. The identity of this complex was established by NMR spectroscopy and single-crystal X-ray diffraction. It is significant since it suggests bidentate binding of NB in the propagating species, which cannot be observed by NMR spectroscopy. The NMR studies suggest that the second insertion, i.e., insertion of NB in the agostic intermediate, is the slow initiation step and the subsequent insertions are extremely fast. Therefore, slow chelate opening is the major limitation preventing a living polymerization. This hypothesis was explored using a series of cationic substituted pi-allyl complexes; significantly increased reactivity was observed when electron-withdrawing groups were introduced into the allyl moiety. However, despite these modifications initiation remained slow relative to chain propagation.

Reactivity studies on [Cp′FeI]2: From iron hydrides to P4-activation

Metathesis of [Cp′FeI]2 (1) with KHBEt3 affords the polyhydride iron complexes [Cp′FeH2]2 (2) and [Cp′2Fe2H3] (3). The ratio in which both 2 and 3 are obtained correlates to the applied H2 pressure during synthesis. Complex 2 activates CH- or CD- bonds in aromatic compounds and shows slow H/D exchange in the presence of D2 at room temperature in cyclohexane solvent. [Cp′FeH2]2 acts as a Cp′Fe(I)-synthon when reacted with white phosphorus (P4) to give [Cp′Fe]2(μ-P4) (4) as the only P-containing product. This complex is best described as a triple-decker complex with a planar arrangement of a severely distorted kite-like cyclo-P4 unit. This distortion persists in solution and solid state as evidenced by a small PP coupling constant in the 31P{1H} NMR spectrum and a long P–P distance of 2.53 A. Complex 4 is an isomer to the long-known [{Cp′Fe}2(μ-η4:η4-P4)] (5) with a cis-tetraphosphabutadiene moiety and it thermally rearranges to 5, [{Cp′Fe}2(μ-η3:η3-P3)] and [Cp′Fe(P5)]. All complexes described in this paper have been completely characterized including X-ray crystallography, variable temperature NMR studies and DFT calculations. Relaxed force constants (inverse compliance constants) are used as bond strength descriptors.