Marcelo Câmara

State of the Art on Micromilling of Materials, a Review

The trend towards miniaturization has increased dramatically over the last decade, especially within the fields concerned with bioengineering, microelectronics, and aerospace. Micromilling is among the principal manufacturing processes which have allowed the development of components possessing micrometric dimensions, being used to the manufacture of both forming tools and the final product. The aim of this work is to present the principal aspects related to this technology, with emphasis on the work material requirements, tool materials and geometry, cutting forces and temperature, quality of the finished product, process modelling and monitoring and machine tool requirements. It can be noticed that size effect possesses a relevant role with regard to the selection of both work material (grain size) and tooling (edge radius). Low forces and temperature are recorded during micromilling, however, the specific cutting force may reach high values because of the ploughing effect observed as the uncut chip thickness is reduced. Finally, burr formation is the principal concern with regard to the quality of the finished part.

Influence of Machining Parameters of the Drilling Polymers UHMW-PE and PTFE

Over the years, with the increasing development of engineering materials, the emergence of new composites, fiber metal laminated, biomaterials, metal alloys etc., and with demand for products less expensive, less polluting and more efficient, the manufacturing engineering also needs to develop to be able to process these new materials. Materials and tool geometries, intelligent mechanisms, modular machines, also follow this setting. To that end, this work comes to raise the main parameters that influence in the hole quality surface of finished product. Were used two polymeric materials, ultra high molecular weight polyethylene (UHMW-PE) and polytetrafluoroethylene (PTFE), two feed rates, three rotations and three tool geometries, allowing to identify which of these parameters have greater influence on the thrust force and the characteristics of the finished product and dimensional deviation.