Marco Mezzavilla

Initial Access in 5G mmWave Cellular Networks

The massive amounts of bandwidth available at millimeter-wave frequencies (above 10 GHz) have the potential to greatly increase the capacity of fifth generation cellular wireless systems. However, to overcome the high isotropic propagation loss experienced at these frequencies, highly directional antennas will be required at both the base station and the mobile terminal to achieve sufficient link budget in wide area networks. This reliance on directionality has important implications for control layer procedures. In particular, initial access can be significantly delayed due to the need for the base station and the user to find the proper alignment for directional transmission and reception. This article provides a survey of several recently proposed techniques for this purpose. A coverage and delay analysis is performed to compare various techniques including exhaustive and iterative search, and context-information-based algorithms. We show that the best strategy depends on the target SNR regime, and provide guidelines to characterize the optimal choice as a function of the system parameters.

Comparative analysis of initial access techniques in 5G mmWave cellular networks

The millimeter wave frequencies (roughly above 10 GHz) offer the availability of massive bandwidth to greatly increase the capacity of fifth generation (5G) cellular wireless systems. However, to overcome the high isotropic pathloss at these frequencies, highly directional transmissions will be required at both the base station (BS) and the mobile user equipment (UE) to establish sufficient link budget in wide area networks. This reliance on directionality has important implications for control layer procedures. Initial access in particular can be significantly delayed due to the need for the BS and the UE to find the initial directions of transmission. This paper provides a survey of several recently proposed techniques. Detection probability and delay analysis is performed to compare various techniques including exhaustive and iterative search. We show that the optimal strategy depends on the target SNR regime.

5G MmWave Module for the ns-3 Network Simulator

The increasing demand of data, along with the spectrum scarcity, are motivating a urgent shift towards exploiting new bands. This is the main reason behind identifying mmWaves as the key disruptive enabling technology for 5G cellular networks. Indeed, utilizing new bands means facing new challenges; in this context, they are mainly related to the radio propagation, which is shorter in range and more sensitive to obstacles. The resulting key aspects that need to be taken into account when designing mmWave cellular systems are directionality and link intermittency. The lack of network level results motivated this work, which aims at providing the first of a kind open source mmWave framework, based on the network simulator ns-3. The main focus of this work is the modeling of customizable channel, physical (PHY) and medium access control (MAC) layers for mmWave systems. The overall design and architecture of the model are discussed in details. Finally, the validity of our proposed framework is corroborated through the simulation of a simple scenario.

Transport layer performance in 5G mmWave cellular

The millimeter wave (mmWave) bands are likely to play a significant role in next generation cellular systems due to the possibility of very high throughput thanks to the availability of massive bandwidth and high-dimensional antennas. Especially in Non-Line-of-Sight conditions, significant variations in the received RF power can occur as a result of the scattering from nearby building and terrain surfaces. Scattering objects come and go as the user moves through the local environment. At the higher end of the mmWave band, rough surface scatter generates cluster-based small-scale fading, where signal levels can vary by more than 20 dB over just a few wavelengths. This high level of channel variability may present significant challenges for congestion control. Using our recently developed end-to-end mmWave ns3-based framework, this paper presents the first performance evaluation of TCP congestion control in next-generation mmWave networks. Importantly, the framework can incorporate detailed models of the mmWave channel, beamforming and tracking algorithms, and builds on statistical channel models derived from real measurements in New York City, as well as detailed ray traces.

Improved Handover Through Dual Connectivity in 5G mmWave Mobile Networks

The millimeter wave (mmWave) bands offer the possibility of orders of magnitude greater throughput for fifth-generation (5G) cellular systems. However, since mmWave signals are highly susceptible to blockage, channel quality on any one mmWave link can be extremely intermittent. This paper implements a novel dual connectivity protocol that enables mobile user equipment devices to maintain physical layer connections to 4G and 5G cells simultaneously. A novel uplink control signaling system combined with a local coordinator enables rapid path switching in the event of failures on any one link. This paper provides the first comprehensive end-to-end evaluation of handover mechanisms in mmWave cellular systems. The simulation framework includes detailed measurement-based channel models to realistically capture spatial dynamics of blocking events, as well as the full details of Medium Access Control, Radio Link Control, and transport protocols. Compared with conventional handover mechanisms, this paper reveals significant benefits of the proposed method under several metrics.

A lightweight and accurate link abstraction model for the simulation of LTE networks in ns-3

In this work we present a link abstraction model for the simulation of downlink data transmission in LTE networks. The purpose of this model is to provide an accurate link performance metric at a low computational cost by relying solely on the knowledge of the SINR and of the modulation and coding scheme. To this aim, the model combines Mutual Information-based multi-carrier compression metrics with Link-Level performance curves matching, to obtain lookup tables that express the dependency of the Block Error Rate on the SINR values and on the modulation and coding scheme being used. In addition, we propose a 3GPP-compliant Channel Quality Indicator evaluation procedure, based on the proposed Link Abstraction Model, to be used as part of the LTE Adaptive Modulation and Coding mechanisms. Finally, we discuss how these contributions have been tested, validated and integrated in the ns-3 simulator. The link abstraction model described in this paper has been included in the official ns-3 distribution since release 3.14.

A Framework for End-to-End Evaluation of 5G mmWave Cellular Networks in ns-3

The growing demand for ubiquitous mobile data services along with the scarcity of spectrum in the sub-6 GHz bands has given rise to the recent interest in developing wireless systems that can exploit the large amount of spectrum available in the millimeter wave (mmWave) frequency range. Due to its potential for multi-gigabit and ultra-low latency links, mmWave technology is expected to play a central role in 5th Generation (5G) cellular networks. Overcoming the poor radio propagation and sensitivity to blockages at higher frequencies presents major challenges, which is why much of the current research is focused at the physical layer. However, innovations will be required at all layers of the protocol stack to effectively utilize the large air link capacity and provide the end-to-end performance required by future networks. Discrete-event network simulation will be an invaluable tool for researchers to evaluate novel 5G protocols and systems from an end-to-end perspective. In this work, we present the first-of-its-kind, open-source framework for modeling mmWave cellular networks in the ns-3 simulator. Channel models are provided along with a configurable physical and MAC-layer implementation, which can be interfaced with the higher-layer protocols and core network model from the ns-3 LTE module to simulate end-to-end connectivity. The framework is demonstrated through several example simulations showing the performance of our custo mmmWave stack.

Multi-connectivity in 5G mmWave cellular networks

The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular wireless systems. However, links in mmWave networks are highly susceptible to blocking and may suffer from rapid variations in quality. Connectivity to multiple cells - both in the mmWave and in the traditional lower frequencies - is thus considered essential for robust connectivity. However, one of the challenges in supporting multi-connectivity in the mmWave space is the requirement for the network to track the direction of each link in addition to its power and timing. With highly directional beams and fast varying channels, this directional tracking may be the main bottleneck in realizing robust mmWave networks. To address this challenge, this paper proposes a novel measurement system based on (i) the UE transmitting sounding signals in directions that sweep the angular space, (ii) the mmWave cells measuring the instantaneous received signal strength along with its variance to better capture the dynamics and, consequently, the reliability of a channel/direction and, finally, (iii) a centralized controller making handover and scheduling decisions based on the mmWave cell reports and transmitting the decisions either via a mmWave cell or conventional microwave cell (when control signaling paths are not available). We argue that the proposed scheme enables efficient and highly adaptive cell selection in the presence of the channel variability expected at mmWave frequencies.

Initial Access in Millimeter Wave Cellular Systems

Millimeter wave (mmWave) bands have attracted considerable recent interest for next-generation cellular systems due to the massive available spectrum at these frequencies. However, a key challenge in designing mmWave cellular systems is initial access-the procedure by which a mobile device establishes an initial link-layer connection to a cell. MmWave communication relies on highly directional transmissions and the initial access procedure must thus provide a mechanism by which initial transmission directions can be searched in a potentially large angular space. Design options are compared considering different scanning and signaling procedures to evaluate access delay and system overhead. The channel structure and multiple access issues are also considered. The results of our analysis demonstrate significant benefits of low-resolution fully digital architectures in comparison with single stream analog beamforming.

Directional initial access for millimeter wave cellular systems

Communication in millimeter (mmWave) bands seems an evermore promising prospect for new generation cellular systems. However, due to high isotropic pathloss at these frequencies the use of directional antennas becomes mandatory. Directivity complicates many system design issues that are trivial in current cellular implementations. One such issue is initial access, i.e., the establishment of a link-layer connection between a UE and a base station. Based on different combinations of beamforming architectures and transmission modes, we present a series of design options for initial access in mmWave and compare them in terms of delay performance. We show that the use of digital beamforming for initial access will expedite the whole process significantly. Also, we argue that low quantization digital beamforming can more than compensate for high power consumption.