Marcos Eguílaz

An electrochemical immunosensor for testosterone using functionalized magnetic beads and screen-printed carbon electrodes

A disposable electrochemical immunosensor using screen-printed carbon electrodes (SPCEs) and protein A-functionalized magnetic beads (MBs) was developed for the determination of testosterone. Anti-testosterone was immobilized onto MBs and a direct competitive immunoassay involving testosterone labeled with peroxidase (HRP) was performed. The resulting conjugate was trapped on the SPCE with a small magnet. Testosterone determination was carried out by amperometry at -0.2V upon H2O2 additions using hydroquinone (HQ) as the redox mediator. The experimental variables involved in the immunosensor response to testosterone were evaluated. Under the optimized conditions, a calibration plot for testosterone was obtained with a linear range between 5.0×10(-3) and 50 ng/mL (r=0.995). The detection limit was 1.7 pg/mL and the EC50 was 0.25±0.04 ng/mL. These characteristics are notably better than those achieved with other reported immunosensors. Furthermore, anti-testosterone/MBs conjugates were shown to be stable for at least 25 days. A good selectivity was also found against other steroid hormones. The usefulness of the immunosensor was demonstrated by analyzing human serum spiked with 1 and 10 ng/mL testosterone.

Designing Electrochemical Interfaces with Functionalized Magnetic Nanoparticles and Wrapped Carbon Nanotubes as Platforms for the Construction of High-Performance Bienzyme Biosensors

The design of a novel biosensing electrode surface, combining the advantages of magnetic ferrite nanoparticles (MNPs) functionalized with glutaraldehyde (GA) and poly(diallyldimethylammonium chloride) (PDDA)-coated multiwalled carbon nanotubes (MWCNTs) as platforms for the construction of high-performance multienzyme biosensors, is reported in this work. Before the immobilization of enzymes, GA-MNP/PDDA/MWCNT composites were prepared by wrapping of carboxylated MWCNTs with positively charged PDDA and interaction with GA-functionalized MNPs. The nanoconjugates were characterized by scanning electron microscopy (SEM) and electrochemistry. The electrode platform was used to construct a bienzyme biosensor for the determination of cholesterol, which implied coimmobilization of cholesterol oxidase (ChOx) and peroxidase (HRP) and the use of hydroquinone as redox mediator. Optimization of all variables involved in the preparation and analytical performance of the bienzyme electrode was accomplished. At an applied potential of -0.05 V, a linear calibration graph for cholesterol was obtained in the 0.01-0.95 mM concentration range. The detection limit (0.85 μM), the apparent Michaelis-Menten constant (1.57 mM), the stability of the biosensor, and the calculated activation energy can be advantageously compared with the analytical characteristics of other CNT-based cholesterol biosensors reported in the literature. Analysis of human serum spiked with cholesterol at different concentration levels yielded recoveries between 100% and 103%

Supramolecular immobilization of xanthine oxidase on electropolymerized matrix of functionalized hybrid gold nanoparticles/single-walled carbon nanotubes for the preparation of electrochemical biosensors.

Glassy carbon electrodes modified with single-walled carbon nanotubes and a three-dimensional network of electropolymerized Au nanoparticles capped with 2-mercaptoethanesulfonic acid, p-aminothiophenol, and 1-adamantanethiol were used as hybrid electrochemical platforms for supramolecular immobilization of a synthesized artificial neoglycoenzyme of xanthine oxidase and β-cyclodextrin through host-guest interactions. The ensemble was further employed for the bioelectrochemical determination of xanthine. The biosensor showed fast amperometric response within 5 s and a linear behavior in the 50 nM to 9.5 μM xanthine concentration range with high sensitivity, 2.47 A/(M cm(2)), and very low detection limit of 40 nM. The stability of the biosensor was significantly improved and the interferences caused by ascorbic and uric acids were noticeably minimized by coating the electrode surface with a Nafion thin film.

Enzyme biosensor for androsterone based on 3α-hydroxysteroid dehydrogenase immobilized onto a carbon nanotubes/ionic liquid/NAD+ composite electrode

A 3α-hydrosteroid biosensor for androsterone determination has been prepared by immobilizing the enzyme 3α-hydroxysteroid dehydrogenase (3α-HSD) in a composite electrode platform constituted of a mixture of multi-walled carbon nanotubes (MWCNTs), octylpyridinium hexafluorophosphate (OPPF(6)) ionic liquid and NAD(+) cofactor. This configuration allowed the fast, sensitive and stable electrochemical detection of the NADH generated in the enzyme reaction. All the experimental variables involved in the preparation and performance of the enzyme biosensor were optimized. Amperometry in stirred solutions at +400 mV provided a linear calibration plot for androsterone in the 0.5-10 μM concentration range with a slope value more than 200-times higher than that previously reported. The detection limit achieved was 0.15 μM and a low value of the apparent Michaelis-Menten constant (K(app)(M)), 36.0 μM, similar to that reported for the enzyme in solution, was calculated. The 3α-HSD/MWCNTs/OPPF(6)/NAD(+) biosensor provided good results in the determination of androsterone in spiked human serum samples.

Seed-mediated growth of jack-shaped gold nanoparticles from cyclodextrin-coated gold nanospheres

Branched gold nanoparticles were prepared by a seed-mediated approach using per-6-thio-6-deoxy-β-cyclodextrin capped gold nanospheres as seeds and a growth medium similar to those commonly employed to prepare gold nanorods, containing AgNO3, ascorbic acid and cetyltrimethylammonium bromide. Novel jack-shaped gold nanoparticles (102-105 nm) were obtained at a specific range of Ag(+) ion concentrations (62-102 μM). The crystalline structure of these nanoparticles was confirmed by high-resolution transmission electron microscopy. The influence of the perthiolated β-cyclodextrin on the successful preparation of gold nanojacks was demonstrated. The jack-shaped gold nanoparticles showed strong absorption in the near infrared region and excellent catalytic activity for the electrochemical oxidation of H2O2.

ELECTROCHEMICAL BIOINTERFACES BASED ON CARBON NANOTUBES-MESOPOROUS SILICA HYBRID MATERIAL: BIOELECTROCATALYSIS OF HEMOGLOBIN AND BIOSENSING APPLICATIONS

We are reporting a novel biosensing platform based on a hybrid nanomaterial that combines the advantages of Nafion-coated multiwalled carbon nanotubes (MWCNTs) and mesoporous silica MCM41 nanoparticles functionalized with hemoglobin (Hb). MWCNTs-MCM41-Hb hybrid bioconjugate was characterized by scanning electron microscopy (SEM), UV-vis spectroscopy and electrochemical techniques after deposition at glassy carbon electrodes (GCE). The combination of the high surface area, biocompatibility and protein loading capacity of MCM41 nanoparticles and the high surface area and catalytic properties of MWCNTs allowed the direct electron transfer (DET) between Hb and the electrode surface. The electron transfer rate constant (k) and the surface coverage of electroactive Hb (ΓHb) were 5.2u202fs-1 and 4.7u202f×u202f10-10 molu202fcm-2, respectively. The GCE modified with the nanostructured architecture (GCE/MWCNTs-MCM41-Hb) was successfully used as a third-generation biosensor for the highly sensitive and selective quantification of nitrite (NO2-) and trichloroacetic acid (TCA) by taking advantage of the excellent biocatalytic activity of Hb and the efficient direct charge transfer of the heme group.