Marek Blahut

Technology of ion exchange in glass and its application in waveguide planar sensors

The possibilities of producing waveguide structures in glass using the ion-exchange technique are discussed. The modeling of par- ticular sequences of the technological process with respect to planar and strip waveguide structures as well as refraction profile measurement re- sults for these waveguides are presented. An exemplary application of this technique in the construction of planar sensors is also presented.

Visualization method of modal interference in multimode interference structures

Abstract A method of modal field interference examination in multimode interference structures (MMI) is proposed, using fluorescence of the substance covering the MMI section. The method enables direct observation of modal fields interference and allows to determine the propagation lengths of N -fold images for the given window width of MMI section and technological process parameters. Testing investigations are carried out for MMI structures made by K + –Na + ion exchange process in glass. The investigations concern the self-imaging phenomena for symmetrical and paired interference.

Integrated optical difference interferometer

The present paper discusses theoretical and experimental research on the planar difference interferometer produced with the use of planar technique on a glass substrate plate (planar interferometers) in view of its application in the system of phase-polarization sensors of basic physical quantities.

Multimode interference in sensor applications

In the paper is presented a numerical analysis of optical sensors based on gradient index multimode interference structures (MMI) made by sodium-potassium ion exchange is presented. Variations of external propagation conditions change the mode properties and as a result the modal fields interference pattern and the signal distribution at the output. Three sensor configurations are considered. In the first case multimode section is covered by dielectric layer which change the real part of the refractive index during its contact with measured analyte. The second configuration use the additional thin buffer layer of a high refractive index placed between the core of a multimode section and a dielectric sensing layer which increases the energy of modes in the active region. A third configuration is based on the MMI section with cladding layer that changes the refractive index and extinction with changes of the concentration of the measured analyte.

Impact of high index buffer layer on the improvement of the MMI sensor sensitivity

The paper presents the way that colour can serve solving the problem of calibration points indexing in a camera geometrical calibration process. We propose a technique in which indexes of calibration points in a black-and-white chessboard are represented as sets of colour regions in the neighbourhood of calibration points. We provide some general rules for designing a colour calibration chessboard and provide a method of calibration image analysis. We show that this approach leads to obtaining better results than in the case of widely used methods employing information about already indexed points to compute indexes. We also report constraints concerning the technique. Nowadays we are witnessing an increasing need for camera geometrical calibration systems. They are vital for such applications as 3D modelling, 3D reconstruction, assembly control systems, etc. Wherever possible, calibration objects placed in the scene are used in a camera geometrical calibration process. This approach significantly increases accuracy of calibration results and makes the calibration data extraction process easier and universal. There are many geometrical camera calibration techniques for a known calibration scene [1]. A great number of them use as an input calibration points which are localised and indexed in the scene. In this paper we propose the technique of calibration points indexing which uses a colour chessboard. The presented technique was developed by solving problems we encountered during experiments with our earlier methods of camera calibration scene analysis [2]-[3]. In particular, the proposed technique increases the number of indexed points points in case of local lack of calibration points detection. At the beginning of the paper we present a way of designing a chessboard pattern. Then we describe a calibration point indexing method, and finally we show experimental results. A black-and-white chessboard is widely used in order to obtain sub-pixel accuracy of calibration points localisation [1]. Calibration points are defined as corners of chessboard squares. Assuming the availability of rough localisation of these points, the points can be indexed. Noting that differences in distances between neighbouring points in calibration scene images differ slightly, one of the local searching methods can be employed (e.g. [2]). Methods of this type search for a calibration point to be indexed, using a window of a certain size. The position of the window is determined by a vector representing the distance between two previously indexed points in the same row or column. However, experiments show that this approach has its disadvantages, as described below. * E-mail: A.Nowakowski@ire.pw.edu.pl Firstly, there is a danger of omitting some points during indexing in case of local lack of calibration points detection in a neighbourhood (e.g. caused by the presence of non-homogeneous light in the calibration scene). A particularly unfavourable situation is when the local lack of detection effects in the appearance of separated regions of detected calibration points. It is worth saying that such situations are likely to happen for calibration points situated near image borders. Such points are very important for the analysis of optical nonlinearities, and a lack of them can significantly influence the accuracy of distortion modelling. Secondly, such methods may give wrong results in the case of optical distortion with strong nonlinearities when getting information about the neighbouring index is not an easy task. Beside this, the methods are very sensitive to a single false localisation of a calibration point. Such a single false localisation can even result in false indexing of a big set of calibration points. To avoid the above-mentioned problems, we propose using a black-and-white chessboard which contains the coded index of a calibration point in the form of colour squares situated in the nearest neighbourhood of each point. The index of a certain calibration point is determined by colours of four nearest neighbouring squares (Fig.1). An order of squares in such foursome is important. Because the size of a colour square is determined only by the possibility of correct colour detection, the size of a colour square can be smaller than the size of a black or white square. The larger size of a black or white square is determined by the requirements of the exact localisation step which follows the indexing of calibration points [3]. In this step, edge information is extracted from a blackand-white chessboard. This edge information needs larger Artur Nowakowski, Wladyslaw Skarbek Institute of Radioelectronics, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, A.Nowakowski@ire.pw.edu.pl Received February 10, 2009; accepted March 27, 2009; published March 31, 2009 http://www.photonics.pl/PLP

1xN waveguide splitters based on multimode interference structures made by ion exchange in glass

The paper presents technology of 1xN waveguide splitters based on multimode interference (MMI) structures made by ion exchange in glass. A method of modal field interference examination in MMI structures, using fluorescence of the substance covering the MMI section is proposed. Testing investigations are carried out for MMI structures made by K+↔Na+ ion exchange process in glass. Studies of technology of 1xN waveguide splitters based on MMI structures made by ion exchange in glass are also presented.

Multimode interference waveguide splitters made by Ag+-Na+ ion exchange in glass for sensor applications

In the paper are presented numerical studies of gradient index optical splitters made in a multimode interference technology by Ag+

Numerical analysis of selectively coated MMI structures for the application in optical sensor technology

ARLR Na+ ion exchange process. The influence of geometrical parameters of multimode interference structure and technological process parameters is examined in numerical simulations and gradient index optical waveguide splitters and Mach-Zehnder interferometers are proposed. The possibility of using MMI sections as transducers of distributed sensors is discussed.

Investigations of multimode interference in gradient planar structures made by Ag + ↔Na + ion-exchange in glass

The paper presents the way that colour can serve solving the problem of calibration points indexing in a camera geometrical calibration process. We propose a technique in which indexes of calibration points in a black-and-white chessboard are represented as sets of colour regions in the neighbourhood of calibration points. We provide some general rules for designing a colour calibration chessboard and provide a method of calibration image analysis. We show that this approach leads to obtaining better results than in the case of widely used methods employing information about already indexed points to compute indexes. We also report constraints concerning the technique. Nowadays we are witnessing an increasing need for camera geometrical calibration systems. They are vital for such applications as 3D modelling, 3D reconstruction, assembly control systems, etc. Wherever possible, calibration objects placed in the scene are used in a camera geometrical calibration process. This approach significantly increases accuracy of calibration results and makes the calibration data extraction process easier and universal. There are many geometrical camera calibration techniques for a known calibration scene [1]. A great number of them use as an input calibration points which are localised and indexed in the scene. In this paper we propose the technique of calibration points indexing which uses a colour chessboard. The presented technique was developed by solving problems we encountered during experiments with our earlier methods of camera calibration scene analysis [2]-[3]. In particular, the proposed technique increases the number of indexed points points in case of local lack of calibration points detection. At the beginning of the paper we present a way of designing a chessboard pattern. Then we describe a calibration point indexing method, and finally we show experimental results. A black-and-white chessboard is widely used in order to obtain sub-pixel accuracy of calibration points localisation [1]. Calibration points are defined as corners of chessboard squares. Assuming the availability of rough localisation of these points, the points can be indexed. Noting that differences in distances between neighbouring points in calibration scene images differ slightly, one of the local searching methods can be employed (e.g. [2]). Methods of this type search for a calibration point to be indexed, using a window of a certain size. The position of the window is determined by a vector representing the distance between two previously indexed points in the same row or column. However, experiments show that this approach has its disadvantages, as described below. * E-mail: A.Nowakowski@ire.pw.edu.pl Firstly, there is a danger of omitting some points during indexing in case of local lack of calibration points detection in a neighbourhood (e.g. caused by the presence of non-homogeneous light in the calibration scene). A particularly unfavourable situation is when the local lack of detection effects in the appearance of separated regions of detected calibration points. It is worth saying that such situations are likely to happen for calibration points situated near image borders. Such points are very important for the analysis of optical nonlinearities, and a lack of them can significantly influence the accuracy of distortion modelling. Secondly, such methods may give wrong results in the case of optical distortion with strong nonlinearities when getting information about the neighbouring index is not an easy task. Beside this, the methods are very sensitive to a single false localisation of a calibration point. Such a single false localisation can even result in false indexing of a big set of calibration points. To avoid the above-mentioned problems, we propose using a black-and-white chessboard which contains the coded index of a calibration point in the form of colour squares situated in the nearest neighbourhood of each point. The index of a certain calibration point is determined by colours of four nearest neighbouring squares (Fig.1). An order of squares in such foursome is important. Because the size of a colour square is determined only by the possibility of correct colour detection, the size of a colour square can be smaller than the size of a black or white square. The larger size of a black or white square is determined by the requirements of the exact localisation step which follows the indexing of calibration points [3]. In this step, edge information is extracted from a blackand-white chessboard. This edge information needs larger Artur Nowakowski, Wladyslaw Skarbek Institute of Radioelectronics, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, A.Nowakowski@ire.pw.edu.pl Received February 10, 2009; accepted March 27, 2009; published March 31, 2009 http://www.photonics.pl/PLP

Multimode interference structures made by ion exchange in glass

The paper presents investigations of multimode interference effects in gradient MMI structures. Investigated waveguides are produced in Ag+ ↔ Na+ ion-exchange technology. Adaptation of technology process providing improvement of transmission parameters of produced structures is described. The received results and investigation conclusions of obtained images are presented.