Marek Bujdoš

Utilization of optimized BCR three-step sequential and dilute HCl single extraction procedures for soil-plant metal transfer predictions in contaminated lands.

The prediction of soil metal phytoavailability using the chemical extractions is a conventional approach routinely used in soil testing. The adequacy of such soil tests for this purpose is commonly assessed through a comparison of extraction results with metal contents in relevant plants. In this work, the fractions of selected risk metals (Al, As, Cd, Cu, Fe, Mn, Ni, Pb, Zn) that can be taken up by various plants were obtained by optimized BCR (Community Bureau of Reference) three-step sequential extraction procedure (SEP) and by single 0.5 mol L(-1) HCl extraction. These procedures were validated using five soil and sediment reference materials (SRM 2710, SRM 2711, CRM 483, CRM 701, SRM RTH 912) and applied to significantly different acidified soils for the fractionation of studied metals. The new indicative values of Al, Cd, Cu, Fe, Mn, P, Pb and Zn fractional concentrations for these reference materials were obtained by the dilute HCl single extraction. The influence of various soil genesis, content of essential elements (Ca, Mg, K, P) and different anthropogenic sources of acidification on extraction yields of individual risk metal fractions was investigated. The concentrations of studied elements were determined by atomic spectrometry methods (flame, graphite furnace and hydride generation atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry). It can be concluded that the data of extraction yields from first BCR SEP acid extractable step and soil-plant transfer coefficients can be applied to the prediction of qualitative mobility of selected risk metals in different soil systems.

Interaction of silicon and cadmium in Brassica juncea and Brassica napus

The objective of this study was to determine the effect of silicon (Si) and cadmium (Cd) on root and shoot growth and Cd uptake in two hydroponically cultivated Brassica species (B. juncea (L.) Czern. cv. Vitasso and B. napus L. cv. Atlantic). Both species are potentially usable for phytoextraction. Inhibitory effects of Cd on root elongation were diminished by the impact of Si. Primary roots elongation in the presence of Cd + Si compared with Cd was stronger and the number of lateral roots was lower in B. juncea than in B. napus. Cd content per plant was higher in B. napus roots and shoots compared with B. juncea. Suberin lamellae were formed closer to the root apex in Cd + Si than in Cd treated plants and this effect was stronger in B. napus than in B. juncea. Accelerated maturation of endodermis was associated with reduced Cd uptake. Cd decreased the content of chlorophylls and carotenoids in both species, but Si addition positively influenced the content of photosynthetic pigments which was higher in B. napus than in B. juncea. Si enhanced more substantially translocation of Cd into the shoot of B. napus than of B. juncea. Based on our results B. napus seems to be more suitable for Cd phytoextraction than B. juncea because these plants produce more biomass and accumulate higher amount of Cd. The protective effect of Si on Cd treated Brassica plants could be attributed to more extensive development of suberin lamellae in endodermis.

Free aluminium extraction from various reference materials and acid soils with relation to plant availability

The single extractions with 15 extractants (agents) (H(2)O, KCl, NH(4)Cl, NH(4)F, CaCl(2), BaCl(2), CuCl(2), LaCl(3), Na(2)S(2)O(4), (NH(4))(2)C(2)O(4), Na(4)P(2)O(7), NTA, EDTA, DTPA, HCl), the optimised BCR (Community Bureau of Reference) three-step sequential extraction procedure (SEP) and the solid phase extraction (SPE) by the chelating ion-exchanger Iontosorb Salicyl (cellulose resin containing covalently bound salicylic acid functional groups) were used for the partitioning of Al in very acid soil samples taken from an area influenced by acid mine solutions. The precision, accuracy and repeatibility for all steps of the optimised BCR SEP were checked on the various reference materials (CRM 483 sewage sludge amended soil, CRM BCR 701 freshwater sediment, SRM 2710 and SRM 2711 Montana soils). Also the new indicative values of the optimised BCR SEP fractional Al concentrations were obtained for these reference materials. The aluminium amounts obtained by the used extraction procedures were valuated and discussed from the aspect of the Al concentration in the plants (grass) growing on the same studied soils. The aluminium toxicity indexes (ATI) calculated for the studied soils, the BaCl(2) and acetic acid soil extracts and the grass stems and roots were used for the assessment of the Al toxicity to the plants. The ATI value was defined as the ratio of the nutrient cations (Ca, Mg, K, Na) concentration sum to the Al concentration. The flame atomic absorption spectrometry (LOQ=0.2mgl(-1)) and the inductively coupled plasma optical emission spectrometry (LOQ=0.03mgl(-1)) were used for the aluminium quantification.

Effect of silicon application on Sorghum bicolor exposed to toxic concentration of zinc

The aim of this study was to determine the effect of exogenously applied Si on the growth and physiological parameters of sorghum [Sorghum bicolor (L.) Moench] cultivated in hydroponics with elevated zinc concentrations (75 μM and 150 μM Zn). Increased concentrations of Zn inhibited root growth and biomass production of roots and shoots. Application of Si individually showed a positive effect on root growth but negatively affected production of fresh and dry biomass of roots and shoots. On the other hand, silicon in combination with Zn significantly reduced the inhibitory effect of Zn on root growth but did not positively affect biomass production of roots and shoots. Accumulation of Zn in plant tissues increased with increasing Zn concentration in nutrient solution, but application of Si in combination with Zn did not significantly influence Zn accumulation in roots. Completely opposite results were found in Si accumulation in roots treated with Si in combination with Zn. Interaction of these ions resulted in considerable increase of Si accumulation in roots which almost doubled in comparison to individal Si treatment. Impact of Zn on the activity of some antioxidant enzymes was equivocal and differences were observed also between two Zn concentrations. Individual application of Si resulted in significant increase in the activity of all studied antioxidant enzymes but Si in combination with Zn mostly negatively affected their activity except the activity of catalase (CAT) which was the highest in roots grown in solution containing both Si and Zn ions. Comparing all obtained data we can assume that Si applied in combination with Zn did not significantly alleviate Zn toxicity in young sorghum except the growth of primary seminal root and further experiments are required for better understanding of their interaction.

Method for preparation of planar alginate hydrogels by external gelling using an aerosol of gelling solution.

Preparation of planar alginate hydrogels by external gelling requires slow rate of exposure of alginate solution to gelling ions to control gelling process and hydrogel properties. We tackled this issue by exposing solution of sodium alginate to solution of CaCl2 applied as aerosol at exposure rate of 7.5 mg cm(-2) s(-1). Gelling conditions varied with respect to concentrations of sodium alginate (1-3 wt.%) and CaCl2 (0.5-4 wt.%), exposure time (2.5-40 min), the 2nd gelling step in the presence of barium ions, and the storage step. Dimensional stability and Youngs modulus values were the principal determined quantities to examine the correlation between hydrogel properties and gelling protocol. The content of calcium ions in hydrogel after gelling by CaCl2 aerosol reveals that the maximum binding capacity of calcium ions by alginate chains was reached. Obtained data suggest that an unusual gelling mechanism related to exposure of sodium alginate to aerosol of gelling solution does not need to be considered since the properties of planar alginate hydrogels follow the trends relevant to general knowledge about alginate hydrogels.

Comparison of element levels in minimal and complex yeast media

The cellular functions are strongly influenced by the composition of the environment. In particular, phenotypes of microbial strains are modulated by concentrations of ions in the culture medium, and differences in element levels may be responsible for a phenotypic variability observed when microbial strains are grown on synthetic versus complex media. In this report, we analyzed the levels of nine elements (magnesium, potassium, sodium, calcium, iron, copper, manganese, zinc, and phosphorus) and sulphate ions in commercially available peptone and yeast extract and compared them with those in yeast nitrogen base routinely used for preparation of synthetic minimal media. We observed that whereas some elements are present at similar levels, the levels of others differ by a factor as high as 20. The observed differences should be taken into account when interpreting different phenotypes observed for microbial strains grown on synthetic versus complex media.

Determination of trace amounts of total dissolved cationic aluminium species in environmental samples by solid phase extraction using nanometer-sized titanium dioxide and atomic spectrometry techniques

Nanometer-sized titanium dioxide was used as a solid-phase extractant for the separation and preconcentration of trace amounts of Al(III) prior to its determination by electrothermal atomic absorption spectrometry (ET AAS) and inductively coupled plasma optical emission spectrometry (ICP OES). The optimal conditions for the proposed solid phase extraction (SPE; 50mg TiO(2), 10 min extraction time, pH 6.0, HCl and HNO(3) as eluents) and ET AAS measurement (1500 degrees C pyrolysis and 2600 degrees C atomization temperatures, Mg(NO(3))(2) as matrix modifier) were obtained. The adsorption capacity of TiO(2) was 4.1mg Al g(-1) TiO(2). Two modes of the proposed procedure were compared, (I) batch and elution mode with the elution of Al from TiO(2) phase by nitric or hydrochloric acid, and (II) batch and slurry mode (without elution) with the direct TiO(2) phase-slurry sampling. Finally, the batch and slurry mode of nanometer-sized TiO(2) SPE with slurry ET AAS detection and quantification was preferred and used for the determination of trace amounts of total dissolved cationic Al species in synthetic and natural water samples. The method accuracy was checked by the analysis of lake water CRM TMDA-61 and by the technique of analyte addition (sample spiking). Under the optimal conditions, the calibration curve for batch and slurry TiO(2) SPE with a 10-fold preconcentration was linear up to 40 microg L(-1) Al. The limit of detection (LOD) and the limit of quantification (LOQ) was 0.11 microg L(-1) Al and 0.35 microg L(-1) Al, respectively, with a preconcentration factor of 20 and a relative standard deviation (RSD) lower than 5%.

Arsenic and selenium interactive effect on alga Desmodesmus quadricauda.

Substances known to be toxic in one-component solutions often exhibit unexpected effects when present in mixtures. Only a few efforts have been made to assess the effect of As-Se mixture in algae or plants in general. Due to the lack of information on this topic, the aim of this study was to examine the As-Se interactive effect in the alga species Desmodesmus quadricauda. The initial density of algal cells was 1.9×10(4), cultures were permanently illuminated (70μEm(-2)s(-1)) and As and Se adverse effect was expressed as EC (effective concentration) value. For all experiments three EC (EC(10), EC(20), EC(50)) values for both metalloids were used: for As 26.20, 29.05, 35.38mg L(-1) and for Se 1.93, 3.65, 12.24mg L(-1), respectively. During this study algal biomass growth, lipid peroxidation and protein-bound thiol content parameters were used to assess the As-Se interactions. The reciprocal effect of the elements on their uptake by the alga was also determined. The As-treated algae supplemented with Se exhibited impaired growth indicating a synergistic interaction between the two elements. In samples treated with As-Se mixture, the total algal As content showed marked increase depending on the Se concentration in the mixture. Se uptake was also positively affected by rising As concentrations in the mixture. Consequently, the As-Se-treated algae experienced greater damage to membranes, evidenced by marked elevation of the TBARS (thiobarbituric acid reactive substances) content. The TBARS content increased to a maximum level by 29.05mg L(-1) of As and 3.65mg L(-1) of Se, which was around 70 percent higher than that of the control. The thiol content was very close to that of the control treatment over the entire concentration range and for all As and Se combinations tested. Possible explanation for the synergism observed in D. quadricauda, is that the elevated uptake of As and Se upon their interaction and impaired antioxidant system, has added to the toxicity of the elements.

Ascorbic acid protects Coccomyxa subellipsoidea against metal toxicity through modulation of ROS/NO balance and metal uptake

Impact of exogenous ascorbic acid (AsA, 100μM) on acute metal toxicity (Pb and Hg, 24h of exposure to 100μM) in unicellular green alga Coccomyxa subellipsoidea was studied. Hg (often extensively) depleted amount of pigments, potassium, soluble proteins, endogenous AsA, non-protein thiols and nitric oxide signal but elevated ROS signal and activities of catalase and superoxide dismutase. Responses to Pb application (if any) were less visible with ROS signal being slightly elevated and amount of non-protein thiols being slightly reduced. Exogenous AsA considerably improved mainly Hg-induced damage at the level of oxidative stress and physiological parameters and evoked an increase in nitric oxide signal. Maximum amount of total Hg was almost 4-fold higher than that of Pb (36.5 vs. 9.73mg/g DW) and AsA depleted both total and intracellular accumulation. At the level of ascorbate-related proteins, exogenous AsA suppressed metal-induced expression and activity of MDHAR and APX but not of DHAR, which may indicate a role of DHAR in algal stress tolerance. Our data suggest that given Coccomyxa species is suitable candidate for remediation of Hg or Pb and that ascorbic acid effectively ameliorates metal-induced toxicity without side effects.

Aluminium leaching from red mud by filamentous fungi.

This contribution investigates the efficient and environmentally friendly aluminium leaching from red mud (bauxite residue) by 17 species of filamentous fungi. Bioleaching experiments were examined in batch cultures with the red mud in static, 7-day cultivation. The most efficient fungal strains in aluminium bioleaching were Penicillium crustosum G-140 and Aspergillus niger G-10. The A. niger G-10 strain was capable to extract up to approximately 141 mg·L(-1) of aluminium from 0.2 g dry weight red mud. Chemical leaching with organic acids mixture, prepared according to A. niger G-10 strains respective fungal excretion during cultivation, proved that organic acids significantly contribute to aluminium solubilization from red mud.