María Begoña González-García

Metal‐Nanoparticles Based Electroanalysis

A general view of the electroanalytical applications of metal-nanoparticles in the last decade is discussed in this review. The electrocatalytical properties of various metal-nanoparticles, the employment of nanoparticles in electrochemical sensors and the use of colloidal gold as electrochemical label (no other metal nanoparticle was found to act as a label in electrochemistry) are described. Also, a description of the fabrication and electrochemical characterization of metal-nanoparticle modified electrodes is given. Finally, due to its growing importance, semiconductor-nanoparticle modified electrodes are described, although they can not be strictly considered as electroanalytical devices.

Colloidal gold as an electrochemical label of streptavidin–biotin interaction

A new electrochemical method to monitor biotin-streptavidin interaction, based on the use of colloidal gold as an electrochemical label, is investigated. Biotinylated albumin is adsorbed on the pretreated surface of a carbon paste electrode (CPE). This modified electrode is immersed in colloidal gold-streptavidin labelled solutions. Adsorptive voltammetry is used to monitor colloidal gold bound to streptavidin, obtaining a good reproducibility of the analytical signal (R.S.D. = 3.3%). A linear relationship between peak current and streptavidin concentration from 2.5 x 10(-9) to 2.5 x 10(-5) M is obtained when a sequential competitive assay between streptavidin and colloidal gold-labelled streptavidin is carried out. On the other hand, the adsorption of streptavidin on the electrode surface was performed, followed by the reaction with biotinylated albumin labelled with colloidal gold. In this way, a linear relationship between peak current and colloidal gold labelled biotinylated albumin concentration is achieved with a limit of detection of 7.3 x 10(9) gold particles per ml (5.29 x 10(-9) M in biotin).

Simultaneous detection of free and total prostate specific antigen on a screen-printed electrochemical dual sensor

Voltammetric enzyme dual sensors for simultaneous determination of free and total prostate specific antigen (fPSA and tPSA) are described. Alkaline Phosphatase (AP) and a mixture solution of 3-indoxyl phosphate and silver ions were used as the enzymatic label and substrate, respectively. 8A6 or 5G6 antibodies specific for free and total PSA, respectively, were immobilized on different screen-printed electrodes (SPEs)--screen-printed carbon electrodes, screen-printed gold electrodes and screen-printed carbon electrodes modified with nanogold--in order to be able to select one of the surfaces as the most adequate one to develop the dual sensor. Screen-printed carbon electrodes modified with nanogold were the SPEs with the best analytical characteristics and lead to the most repeatable bioelectrodes, so they were selected for the development of the dual sensor. On Dualsensor-nAu electrodes, 8A6 antibody was immobilized on one working electrode and 5G6 antibody was immobilized on the other one by deposition of a drop of solution of each antibody and left overnight at 4 degrees C. Biotinylated anti-PSA antibody and streptavidin-AP conjugate were used as detection reagents, giving rise, to our knowledge, to the first simultaneous electrochemical biosensor for free and total PSA. The PSA dual sensor was used to monitor PSA production from three different cultures of human androgen-sensitive prostate tumor cells.

Electrochemical determination of mercury: a review.

Mercury is a metal that has been extensively studied, in large part due to its high toxicity. Therefore, mercury levels must be monitored in different sample types using analytical methods. This review summarizes the electrochemical methods that have been used for mercury analysis in a variety of samples. A critical evaluation of the methods and electrode materials employed for mercury analysis is presented according to the following classifications: bare electrodes, chemically modified electrodes and nanostructured electrodes. The advantages and disadvantages of each type of electrode material regarding mercury analysis are also presented.

AC voltammetric carbon paste-based enzyme immunosensors

Carbon paste electrodes, previously anodised in a basic media, are the basis for the development of a new voltammetric immunosensor device. Passive adsorption of the appropriate immunochemical reagent was performed onto the electrode surface. Alkaline Phosphatase labelled immunoglobulin was the tracer used in this work, 3-indoxyl phosphate being a very suitable enzymatic substrate for the electrochemical detection of the corresponding affinity reaction. The hydrolysis of this molecule generates indigo dimmer. This product was detected by alternating current voltammetry taking advantage of the adsorptive and inherent electrodic properties that it exhibits. The same electrochemical anodisation was used at the end of one assay to remove the entire protein layer attached to the carbon paste surface, allowing the formation of a new sensing phase and the use of the same support in several consecutive experiments. The methodology was applied to the design of two different immunoassays for the determination of human IgG. Good reproducibility of the electrodic signal and a limit of detection around 10(-10) M were achieved.

Development of an immunosensor for the determination of rabbit IgG using streptavidin modified screen-printed carbon electrodes.

Voltammetric enzyme immunosensors based on the employment of streptavidin modified screen-printed carbon electrodes (SPCEs) for the detection of rabbit IgG, as a model analyte, were described. Alkaline phosphatase (AP) and 3-indoxyl phosphate (3-IP) were used as the enzymatic label and substrate, respectively. The adsorption of streptavidin was performed by deposition of a drop of a streptavidin solution overnight at 4 degrees C on the pre-oxidized surface of the SPCEs. The analytical characteristics of these sensors were evaluated using biotin conjugated to AP. The immunosensor devices were based on a specific reaction of rabbit IgG with its biotinylated antibodies, which were immobilised on the modified screen-printed carbon electrodes through the streptavidin:biotin reaction. The immunosensors were used for a direct determination of AP labelled rabbit IgG, and for free rabbit IgG detection using a sequential competitive immunoassay. A calibration curve in the range of 5 x 10(-11) to 1 x 10(-9)M of rabbit IgG was obtained with a estimated detection limit of 5 x 10(-11)M (7.0ng/ml). These immunosensors were stable for 5 months if they were stored at 4 degrees C.

Detection of Ara h 1 (a major peanut allergen) in food using an electrochemical gold nanoparticle-coated screen-printed immunosensor.

A gold nanoparticle-coated screen-printed carbon electrode was used as the transducer in the development of an electrochemical immunosensor for Ara h 1 (a major peanut allergen) detection in food samples. Gold nanoparticles (average diameter = 32 nm) were electrochemically generated on the surface of screen-printed carbon electrodes. Two monoclonal antibodies were used in a sandwich-type immunoassay and the antibody-antigen interaction was electrochemically detected through stripping analysis of enzymatically (using alkaline phosphatase) deposited silver. The total time of the optimized immunoassay was 3h 50 min. The developed immunosensor allowed the quantification of Ara h 1 between 12.6 and 2000 ng/ml, with a limit of detection of 3.8 ng/ml, and provided precise (RSD <8.7%) and accurate (recovery >96.6%) results. The immunosensor was successfully applied to the analysis of complex food matrices (cookies and chocolate), being able to detect Ara h 1 in samples containing 0.1% of peanut.

Celiac disease detection using a transglutaminase electrochemical immunosensor fabricated on nanohybrid screen-printed carbon electrodes

Celiac disease is a gluten-induced autoimmune enteropathy characterized by the presence of tissue tranglutaminase (tTG) autoantibodies. A disposable electrochemical immunosensor (EI) for the detection of IgA and IgG type anti-tTG autoantibodies in real patients samples is presented. Screen-printed carbon electrodes (SPCE) nanostructurized with carbon nanotubes and gold nanoparticles were used as the transducer surface. This transducer exhibits the excellent characteristics of carbon-metal nanoparticle hybrid conjugation and led to the amplification of the immunological interaction. The immunosensing strategy consisted of the immobilization of tTG on the nanostructured electrode surface followed by the electrochemical detection of the autoantibodies present in the samples using an alkaline phosphatase (AP) labelled anti-human IgA or IgG antibody. The analytical signal was based on the anodic redissolution of enzymatically generated silver by cyclic voltammetry. The results obtained were corroborated with a commercial ELISA kit indicating that the electrochemical immunosensor is a trustful analytical screening tool.

Electrochemical immunosensor for anti-tissue transglutaminase antibodies based on the in situ detection of quantum dots.

A miniaturized electrochemical biosensor array with in situ detection of quantum dots (QDs) was developed for the detection of anti-transglutaminase IgG antibodies (a celiac disease biomarker) in human sera. For the fabrication of the sensor, a 8-channel screen-printed carbon electrochemical arrays were used as transducers and modified with tissue-transglutaminase by adsorption. The immunologic reaction was carried out in a few simple steps: reaction with human serum, which contains the analyte of interest, followed by the immunoreaction with anti-human IgG labeled with CdSe/ZnS QDs and electrochemical detection of Cd(2+) released from QDs. All steps were performed on the screen-printed arrays as the solid support, and the detection of Cd(2+) was performed in situ after acid attack of the QDs without a transfer step by voltammetric stripping. The electrochemical response was correlated with the anti-transglutaminase IgG concentration. The developed electrochemical immunosensor is a trustful screening tool for celiac disease diagnosis discriminating between positive and negative sera samples with high sensitivity.

New Trends in Food Allergens Detection: Toward Biosensing Strategies

Food allergens are a real threat to sensitized individuals. Although food labeling is crucial to provide information to consumers with food allergies, accidental exposure to allergenic proteins may result from undeclared allergenic substances by means of food adulteration, fraud or uncontrolled cross-contamination. Allergens detection in foodstuffs can be a very hard task, due to their presence usually in trace amounts, together with the natural interference of the matrix. Methods for allergens analysis can be mainly divided in two large groups: the immunological assays and the DNA-based ones. Mass spectrometry has also been used as a confirmatory tool. Recently, biosensors appeared as innovative, sensitive, selective, environmentally friendly, cheaper and fast techniques (especially when automated and/or miniaturized), able to effectively replace the classical methodologies. In this review, we present the advances in the field of food allergens detection toward the biosensing strategies and discuss the challenges and future perspectives of this technology.