María Carolina Talio

Cadmium monitoring in saliva and urine as indicator of smoking addiction.

Cadmium is one of the many substances that may be acquired through active and passive smoking of tobacco. Saliva and urine are proposed for cadmium monitoring of non-smokers, second hand smokers, smokers and tobacco chewing appertaining to San Luis citizens without occupational exposition. Biological samples were collected by the same subjects, under strict proceeding instructions of sampling. Physical characteristics of samples were observed and checked with commercial test. Samples were analyzed using an adapted molecular fluorescence methodology with a previous extraction step. Stability of biological samples was daily studied for a period of one month. The method was successfully validated for accuracy, precision, linearity, specificity, and sensitivity. The simplicity and low coefficient of variance confirm the suitability of the method for urinary and salivary cadmium analyses. On the other side, the obtained results are in concordance with previous national epidemiological dates.

Determination of cadmium at ultra-trace levels by CPE–molecular fluorescence combined methodology

A highly sensitive micelle-mediated extraction methodology for the preconcentration and determination of trace levels of cadmium by molecular fluorescence has been developed. Metal was complexed with o-phenanthroline (o-phen) and eosin (eo) at pH 7.6 in buffer Tris medium and quantitatively extracted into a small volume of surfactant-rich phase of PONPE 7.5 after centrifugating. The chemical variables affecting cloud point extraction (CPE) were evaluated and optimized. The RSD for six replicates of cadmium determinations at 0.84 microg L(-1) level was 1.17%. The linearity range using the preconcentration system was between 2.79 x 10(-3) microg L(-1) and 2.81 microg L(-1) with a correlation coefficient of 0.99. Under the optimal conditions, it obtained a LOD of 8.38 x 10(-4) microg L(-1) and LOQ of 2.79 x 10(-3) microg L(-1). The method presented good sensitivity and selectivity and was applied to the determination of trace amounts of cadmium in commercially bottled mineral water, tap water and water well samples with satisfactory results. The proposed method is an innovative application of CPE-luminescence to metal analysis comparable in sensitivity and accuracy with atomic spectroscopies.

Evaluation of carbon nanotubes as chiral selectors for continuous-flow enantiomeric separation of carvedilol with fluorescent detection

Single-walled carbon nanotubes (SWNT) are proposed as chiral selectors for separation of carvedilol stereoisomers beginning since its racemic mixture. The novel developed FIA-methodology employs a microcolumn (mC) packed with a few milligrams of SWNT which showed to be effective in S(-) and R(+) carvedilol separation. Attending to spectral properties of analytes, molecular fluorescence was employed in the detection step. Separation of carvedilol enantiomers was achieved in less than 70s with an acceptable resolution factor of 3.16. Variables that influence the chiral separation such as pH and composition of eluent solution, sample injection volume and flow rate, activation mode of NTs and mass of the same in column have been examined in detail. At optimal operational conditions, well repeatability was achieved using the same column for more than 100 injections, putting in evidence the stability of nanomaterial and the efficacy and versatility of the proposed FIA-configuration. The new methodology was successfully applied to S(-) and R(+) carvedilol quantification in pharmaceutical preparations, resulting an attractive alternative to traditional separative methods being fast, simple, using low cost instrumentation and producing scarce waste.

Sequential determination of lead and cobalt in tap water and foods samples by fluorescence

In this work, a new procedure was developed for the separation and preconcentration of lead(II) and cobalt(II) in several water and foods samples. Complexes of metal ions with 8-hydroxyquinolein (8-HQ) were formed in aqueous solution. The proposed methodology is based on the preconcentration/separation of Pb(II) by solid-phase extraction using paper filter, followed by spectrofluorimetric determination of both metals, on the solid support and the filtered aqueous solution, respectively. The solid surface fluorescence determination was carried out at λem=455 nm (λex=385 nm) for Pb(II)-8-HQ complex and the fluorescence of Co(II)-8-HQ was determined in aqueous solution using λem=355 nm (λex=225 nm). The calibration graphs are linear in the range 0.14-8.03×10(4) μg L(-1) and 7.3×10(-2)-4.12×10(3) μg L(-1), for Pb(II) and Co(II), respectively, with a detection limit of 4.3×10(-2) and 2.19×10(-2) μg L(-1) (S/N=3). The developed methodology showed good sensitivity and adequate selectivity and it was successfully applied to the determination of trace amounts of lead and cobalt in tap waters belonging of different regions of Argentina and foods samples (milk powder, express coffee, cocoa powder) with satisfactory results. The new methodology was validated by electrothermal atomic absorption spectroscopy with adequate agreement. The proposed methodology represents a novel application of fluorescence to Pb(II) and Co(II) quantification with sensitivity and accuracy similar to atomic spectroscopies.

Fluorescence method using on-line sodium cholate coacervate surfactant mediated extraction for the flow injections analysis of Rhodamine B

An on-line surfactant mediated extraction method in a flow injection analysis format with fluorescence detection was developed for the determination of Rhodamine B (RhB) in food condiments. The sample was extracted using the phase separation behavior exhibited by the bile salt surfactant, sodium cholate (NaC), upon addition of sodium dodecylsulfate (SDS) in the presence of acid at room temperature. The RhB in the sample was incorporated into the NaC/SDS coacervate phase which was then collected on a glass-wool packed mini column from which it was subsequently eluted using a 1.00 mol L(-1) HCl solution. The inherent fluorescence (λex=555 nm; λem=575 nm) of RhB was employed for detection. Good linearity (r(2)=0.9933) was obtained over the concentration range 0.4-4794-479.0 µg L(-1) RhB. The detection (LOD) and quantification (LOQ) limits were 0.12 and 0.40 µg L(-1), respectively. The method was successfully applied for analysis of RhB in food condiments and spiked samples. The average recoveries ranged from 95.3% to 118.9% at spiked concentration levels of 1.19 and 2.39 µg L(-1). Under optimized conditions, a throughput of 50 samples per hour was achieved. The proposed method may be a valuable tool not only for quality control of food condiments and similar food confectioneries but for the analysis of a variety of other RhB-containing samples as well.

Caffeine monitoring in biological fluids by solid surface fluorescence using membranes modified with nanotubes.

BACKGROUND In this work, a new methodology based upon enhancement of rhodamine B fluorescent signal is proposed for the quantification of caffeine traces. METHODS Membrane filters treated with multiple wall carbon nanotubes were employed as solid support for determination step by solid surface fluorescence. RESULTS Experimental variables that influence the preconcentration step and fluorimetric sensitivity have been optimized using uni-variation assays, presenting linearity from 1.1 to 9.7×10(3) μg/l, with a correlation coefficient of 0.99. At optimal conditions, a limit of detection of 0.3 μg/l and a limit of quantification of 1.1 μg/l were obtained. The method showed good sensitivity and adequate selectivity and was satisfactorily applied to the determination of trace amounts of caffeine in urine, plasma and serum belonging to subjects with different sex, ages and habit of caffeine intake. CONCLUSIONS Chemofiltration step eliminated the highly fluorescent matrix, thus enabling and allowing CF quantification, in the presence of other methylxanthines. The proposed methodology represents an innovative application of the solid surface fluorescence using membrane filters modified with MWCNTs.

Sequential determination of nickel and cadmium in tobacco, molasses and refill solutions for e-cigarettes samples by molecular fluorescence

In this work, a new procedure was developed for separation and preconcentration of nickel(II) and cadmium(II) in several and varied tobacco samples. Tobacco samples were selected considering the main products consumed by segments of the population, in particular the age (youth) and lifestyle of the consumer. To guarantee representative samples, a randomized strategy of sampling was used. In the first step, a chemofiltration on nylon membrane is carried out employing eosin (Eo) and carbon nanotubes dispersed in sodium dodecylsulfate (SDS) solution (phosphate buffer pH 7). In this condition, Ni(II) was selectively retained on the solid support. After that, the filtrate liquid with Cd(II) was re-conditioned with acetic acid /acetate buffer solution (pH 5) and followed by detection. A spectrofluorimetric determination of both metals was carried out, on the solid support and the filtered aqueous solution, for Ni(II) and Cd(II), respectively. The solid surface fluorescence (SSF) determination was performed at λem = 545nm (λex = 515nm) for Ni(II)-Eo complex and the fluorescence of Cd(II)-Eo was quantified in aqueous solution using λem = 565nm (λex = 540nm). The calibration graphs resulted linear in a range of 0.058-29.35μgL-1 for Ni(II) and 0.124-56.20μgL-1 for Cd(II), with detection limits of 0.019 and 0.041μgL-1 (S/N = 3). The developed methodology shows good sensitivity and adequate selectivity, and it was successfully applied to the determination of trace amounts of nickel and cadmium present in tobacco samples (refill solutions for e-cigarettes, snuff used in narguille (molasses) and traditional tobacco) with satisfactory results. The new methodology was validated by ICP-MS with adequate agreement. The proposed methodology represents a novel fluorescence application to Ni(II) and Cd(II) quantification with sensitivity and accuracy similar to atomic spectroscopies, introducing for the first time the quenching effect on SSF.

New solid surface fluorescence methodology for lead traces determination using rhodamine B as fluorophore and coacervation scheme: Application to lead quantification in e-cigarette refill liquids.

A new environmental friendly methodology based on fluorescent signal enhancement of rhodamine B dye is proposed for Pb(II) traces quantification using a preconcentration step based on the coacervation phenomenon. A cationic surfactant (cetyltrimethylammonium bromide, CTAB) and potassium iodine were chosen for this aim. The coacervate phase was collected on a filter paper disk and the solid surface fluorescence signal was determined in a spectrofluorometer. Experimental variables that influence on preconcentration step and fluorimetric sensitivity have been optimized using uni-variation assays. The calibration graph using zero th order regression was linear from 7.4×10(-4) to 3.4 μg L(-1) with a correlation coefficient of 0.999. Under the optimal conditions, a limit of detection of 2.2×10(-4) μg L(-1) and a limit of quantification of 7.4×10(-4) μg L(-1) were obtained. The method showed good sensitivity, adequate selectivity with good tolerance to foreign ions, and was applied to the determination of trace amounts of Pb(II) in refill solutions for e-cigarettes with satisfactory results validated by ICP-MS. The proposed method represents an innovative application of coacervation processes and of paper filters to solid surface fluorescence methodology.

Quantification of caffeine in dietary supplements and energy drinks by solid-surface fluorescence using a pre-concentration step on multi-walled carbon nanotubes and Rhodamine B

A new method for the determination of caffeine, a non-fluorescent analyte, based on the enhancement of the fluorescence of Rhodamine B dye on a membrane filter modified with multi-walled carbon nanotubes is proposed. The method comprises pre-concentration of caffeine on a solid support by chemofiltration in buffered solution onto multi-walled carbon nanotubes previously oxidised and dispersed in cationic surfactant admicelles. The effect of experimental parameters, including the nature of the buffer and pH, the nature of the solid support, filtration flow rate, dye and carbon nanotube concentration, and the nature of the surfactant and concentration were investigated by means univariation assays. Under optimum experimental conditions, the pre-concentration system gave detection and quantification limits of 0.3 and 1.1 µg l−1, respectively. A wide linear range was achieved varying from concentrations of 1.1 to 9.7 × 103 µg l−1 (r2 = 0.999). Satisfactory recovery values were obtained using the method of standard addition, confirming the feasibility of this method for caffeine determination in energising dietary supplements and energy drinks. Graphical Abstract

Novel method for determination of zinc traces in beverages and water samples by solid surface fluorescence using a conventional quartz cuvette.

A new method for zinc pre-concentration/separation and determination by molecular fluorescence is proposed. The metal was complexed with o-phenanthroline and eosin at pH 7.5 in Tris; a piece of filter paper was used as a solid support and solid fluorescent emission measured using a conventional quartz cuvette. Under optimal conditions, the limits of detection and quantification were 0.36 × 10(-3) and 1.29 × 10(-3) μg L(-1), respectively, and the linear range from 1.29 × 10(-3) to 4.50 μg L(-1). This method showed good sensitivity and selectivity, and it was applied to the determination of zinc in foods and tap water. The absence of filtration reduced the consumption of water and electricity. Additionally, the use of common filter papers makes it a simpler and more rapid alternative to conventional methods, with sensitivity and accuracy similar to atomic spectroscopies using a typical laboratory instrument.